以醚胺为模板剂合成含二价金属杂原子的开放骨架磷酸铝化合物M(Ⅱ)-CJ50

在水热体系中, 以2,2'-(乙烯二氧)双(乙胺)为模板剂, 合成了3种含二价金属杂原子的开放骨架磷酸铝化合物M(Ⅱ)-CJ50(|C₆H₁₇N₂O₂| [MAl₃P₄O₁₆], 其中M=Mg, Mn和Fe). 单晶及粉末X射线衍射分析表明, 这3种化合物与以咪唑为模板剂合成的含三价金属杂原子的M(Ⅲ)-CJ50具有相似的骨架拓扑结构. 二者的区别在于: 由于使用了还原性较强的醚胺作模板剂, M(Ⅱ)-CJ50结构中的金属杂原子具有比M(Ⅲ)-CJ50更低的氧化态; M(Ⅱ)-CJ50中的金属杂原子与1个醚胺模板剂分子中的2个醚氧原子形成双齿配位, 而M(Ⅲ)-CJ50中的金属杂原子则与2个咪唑模板剂分别形成单齿配位. 此外, 磁性测试结果表明, 由于金属杂原子的氧化态以及配体模板剂分子的差异, 导致M(Ⅱ)-CJ50中的过渡金属杂原子处于电子高自旋态, 而M(Ⅲ)-CJ50中的杂原子则处于低自旋态.     

Fabrication of Gold Nano‐Structures with Azopolymer Templates

Fabrication of gold nano‐patterns has been demonstrated employing surface relief structures created on films of an azobenzene‐functionalized polymer as templates. The surface relief templates were photoinscribed on the azopolymer films in one‐step with two laser beams. Thin layers of gold were over‐coated on the polymer templates by thermal evaporation. Gold lines of a few hundred nanometer width were successfully fabricated by pyrolyzing the azobenzene polymer. Sub‐micron gold dots were also created. The resulting gold structures exhibited the same periodicity as the polymer templates.     

Multiresidue determination of pesticides from aquatic media using polyaniline nanowires network as highly efficient sorbent for microextraction in packed syringe

A simple, rapid and sensitive method based on microextraction in packed syringe (MEPS), in combination with gas chromatography–mass spectrometry (GC–MS) was developed. Polyaniline (PANI) nanowires network was synthesized and used as sorbent of MEPS for the multiresidue determination of selected analytes from triazine, organochlrorine and organophosphorous pesticides in aqueous samples. The PANI nanowires network was prepared using soft template technique and its characterization was studied by scanning electron microscopy (SEM). The presence of micelles in this methodology showed to be an important parameter in shaping the growing polymer. Hexadecyltrimethylammonium bromide (HTAB) was used as structure directing agent in PANI preparation procedure and this was led to the formation of nanowires with diameters ranging from 35 nm to 45 nm. The synthesized PANI nanowires network showed higher extraction capability in comparison with the bulk PANI. Important parameters influencing the extraction and desorption processes including desorption solvent, elution volume, draw–eject cycles of sample, draw–eject mode, pH effect and amount of sorbent were optimized. Limits of detection were in the range of 0.07–0.3 ng mL⁻¹ using time scheduled selected ion monitoring (SIM) mode. The linearity of method was in the range from 0.5–200 ng mL⁻¹ to 0.2–1000 ng mL⁻¹. The method precision (RSD %) with three replicates were in the range of 5.3–18.4% at the concentration level of 5 ng mL⁻¹. The developed method was successfully applied to the Zayandeh-rood river water samples and the matrix factor obtained for the spiked real water samples were in the range of 0.79–0.94.     

环糊精在聚合反应中的应用

环糊精分子结构上的特点使其在诸多领域有广泛的应用,其中环糊精在聚合反应中的应用正引起广泛关注,已逐渐成为高分子科学研究的重要领域。环糊精不但可以用于形成超分子聚合物,而且可以用于单体分子的聚合反应中。环糊精在聚合反应中不但可以担当单体、引发剂、模板,同时,还起到增溶、分子伴侣、反应活性调控、改变聚合物性质等作用。本文综述了近年来环糊精及其衍生物在聚合物合成过程中应用的研究进展,着重介绍了环糊精在合成聚合物中所起到的不同作用、应用原理等方面的研究成果,并对此领域的未来发展做了展望。     

用于高性能锂硫电池的二维氮硫共掺杂多孔碳纳米片的快速合成

本工作基于工业炼油产品沥青,开发了一种无金属、氮和硫共掺杂多孔碳纳米片（NSPC）的合成方法。获得的多孔碳纳米片具有高比表面积（339 m²·g^-1）和优异的固硫能力。同时,高含量氮、硫共掺杂可以有效增强碳材料的导电性,同时促进多硫化物的高效催化转化。通过熔融法固硫后,制备得到的NSPC/S电极具有较高的比容量和优异的循环稳定性（在0.6C电流密度下,200次循环后容量为762 mAh·g^-1）,实现了高含量氮和硫共掺杂的二维多孔碳材料的快速批量生产并用于高性能锂硫电池正极材料。     

木糖-软模板水热法制备硼掺杂分级多孔炭球及其电化学性能

以D-木糖为炭源,月桂酸钠为模板剂,硼酸为掺杂剂,通过水热炭化方法制得硼掺杂分级多孔炭球（BPC_S）。通过扫描电子显微镜（SEM）、透射电子显微镜（TEM）、N₂吸附-脱附测试、X射线光电子能谱（XPS）、顺磁共振波谱（EPR）、傅里叶红外光谱（FT-IR）、拉曼光谱（Raman）、X射线粉末衍射（XRD）、热重（TG）分析对样品进行表征。结果表明：月桂酸钠作为介孔造孔剂的同时,通过与D-木糖间的氢键作用使有机-有机自组装过程自发进行并形成窄尺寸分布（2~5 μm）规整炭球;硼酸在水热中催化炭源脱水降解,并以BC₃、BCO₂和BC₂O的形式掺杂在炭球上,掺硼后炭球与水表面接触角降低,润湿性提高。经CO₂活化、月桂酸钠高温分解以及胶质炭球的堆积分别产生微孔（0.5~1.2 nm）、介孔（3.14~35.00 nm）和大孔（60~146 nm）并形成分级结构。当硼酸加入量为0.927 5 g时多孔炭球（BPC_S-1）的电化学性能最佳,在6 mol·L^-1 KOH三电极体系中电流密度为0.5 A·g^-1时,比电容达287.12 F·g^-1;两电极体系中电流密度为0.5 A·g^-1时比电容达151.34 F·g^-1,能量密度达5.3 Wh·kg^-1;电流密度为5 A·g^-1时进行1 000次充放电循环,电容保持率仍达96.43%。     

Robust Amino-Functionalized Mesoporous Silica Hollow Spheres Templated by CO2 Bubbles

Hollow-structured mesoporous silica has wide applications in catalysis and drug delivery due to its high surface area, large hollow space, and short diffusion mesochannels. However, the synthesis of hollow structures usually requires sacrificial templates, leading to increased production costs and environmental problems. Here, for the first time, amino-functionalized mesoporous silica hollow spheres were synthesized by using CO₂ gaseous bubbles as templates. The assembly of anionic surfactants, co-structure directing agents, and inorganic silica precursors around CO₂ bubbles formed the mesoporous silica shells. The hollow silica spheres, 200–400 nm in size with 20–30 nm spherical shell thickness, had abundant amine groups on the surface of the mesopores, indicating excellent applications for CO₂ capture, Knoevenagel condensation reaction, and the controlled release of Drugs.     

[2]Catenane Synthesis via Covalent Templating

After earlier unsuccessful attempts, this work reports the application of covalent templating for the synthesis of mechanically interlocked molecules (MiMs) bearing no supramolecular recognition sites. Two linear strands were covalently connected in a perpendicular fashion by a central ketal linkage. After subsequent attachment of the first strand to a template via temporary benzylic linkages, the second was linked to the template in a backfolding macrocyclization. The resulting pseudo[1]rotaxane structure was successfully converted to a [2]catenane via a second macrocyclization and cleavage of the ketal and temporary linkages.