小区暖气失调原因调查和改造方案的实施

通过对镇苑小区采暖情况的跟踪调查及数据采集，找出了供暖系统不热的原因，据此对系统进行了针对性的改造，取得了良好的改造效果。     

TP801控制凝固点降低法测定分子量

介绍用ＴＰ＿（８０１）微机控制凝固点降低法测定分子量的有关原理和技术，与传统的用贝克曼温度计测△Ｔ方法相比，扩大了测量范围，提高了精密度，工作条件得到改善．     

地板辐射供暖系统传热的简化解析计算

对地板辐射供暖系统传热的一般数字模型做了简化处理 ,应用分离变量法得到简化模型的解析解 ,并给出算例     

非水溶剂中难溶盐溶度积的理论计算

该文根据以静电作用、取向作用、诱导作用和色散作用为基础的分子间相互作用力,对AgCl、AgBr、AgI、AgN_3、AgSCN及AgAc等6种难溶盐在MeOH、EtOH、MeCN、DMF、DMAC、DMSO和HCONH_2等7种非水溶剂中的离解平衡常数K_(SP)进行了理论计算,计算结果与文献值吻合较好。     

Molecular modeling study on surface,thermal, mechanical and gas diffusion properties of chitosan

The motivation of this work is to provide reliable and accurate modeling studies of the physical (surface, thermal, mechanical and gas diffusion) properties of chitosan (CS) polymer. Our computational efforts have been devoted to make a comparison of the structural bulk properties of CS with similar type of polymers such as chitin and cellulose through cohesive energy density, solubility parameter, hydrogen bonding, and free volume distribution calculations. Atomistic modeling on CS polymer using molecular mechanics (MM) and molecular dynamics (MD) simulations has been carried out in three dimensionally periodic and effective two dimensionally periodic condensed phases. From the equilibrated structures, surface energies were computed. The equilibrium structure of the films shows an interior region of mass density close to the value in the bulk state. Various components of energetic interactions have been examined in detail to acquire a better insight into the interactions between bulk structure and the film surface. MD simulation (NPT ensemble) has also been used to obtain polymer specific volume as a function of temperature. It is demonstrated that these V–T curves can be used to locate the volumetric glass transition temperature (T_g) reliably. The mechanical properties of CS have been obtained using the strain deformation method. Diffusion coefficients of O₂, N₂, and CO₂ gas molecules at 300 K in CS have been estimated. The calculated properties of CS are comparable with the experimental values reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1260–1270, 2007     

《淮南万毕术》夏造冰之新解——兼与厚宇德先生商榷

二十多年来学术界关于《淮南万毕术》“夏造冰”问题的讨论颇具戏剧性．1983年洪震襄否定了这种可能性，十年之后李志超、赵虹君的相关研究得出了相反的结果．2004年厚宇德研究了李、赵肯定说实验方案，得到出乎意料的相反结论．本文根据原文提出一个新的技术思路，按此思路，则有可能实现“夏造冰”．实际操作中能不能达到预想的目标，还有待于实验验证．     

大体积混凝土施工温度应力分析与控制

文章采用有限元结构分析软件对某拱座进行了混凝土施工期间的温度应力计算分析,计算过程考虑了混凝土的弹性模量、徐变等参数随龄期变化和分层浇筑对拱座温度应力产生的影响,提出了防止施工过程中由于外界温度变化及水泥水化热等因素引起裂缝的措施,并通过部分监控数据对拱座温度变化规律进行了分析。     

Temperature factor effect on the structure of the separated flow within a supersonic gas stream

The effect of the temperature factor, that is, the ratio of the body temperature to the freestream stagnation temperature, on the structure of the separated flow formed in the presence of a concave corner in a supersonic stream is studied. The strong influence of the temperature factor on the separation zone length and the flow-generated aerodynamic characteristics is established. It is shown that for fairly large deflection angles this flow cannot be described by free interaction, or triple deck, theory.     

Rheological properties of polyacrylates used as synthetic road binders

Most adhesives and binders, including bitumen for asphalt mixture production, are presently produced from petrochemicals after the refining of crude oil. The fact that crude oil reserves are a finite resource means that in the future, it may become necessary to produce these materials from alternative and probably renewable sources. Suitable resources of this kind may include polysaccharides, plant oils and proteins. This paper deals with the synthesis of polymer binders from monomers that could, in future, be derived from renewable resources. These binders consist of polyethyl acrylate (PEA) of different molecular weight, polymethyl acrylate (PMA) and polybutyl acrylate (PBA), which were synthesised from ethyl acrylate, methyl acrylate and butyl acrylate, respectively, by atom transfer radical polymerisation. The rheological properties of these binders were determined by means of oscillatory testing using a dynamic shear rheometer and combinations of stress/strain, temperature and frequency sweeps. The results indicate that PEA can be produced to have rheological properties similar to that of ‘soft’ 100/150 penetration grade bitumen, PMA with similar rheological properties to that of ‘hard’ 10/20 penetration grade bitumen, while PBA, due to its highly viscous nature and low dynamic moduli, cannot be used on its own as a binder. The synthetic polymers were found to be thermo-rheologically simple, and the shift factors, used to produce the dynamic moduli master curves, were found to fit an Arrhenius function.     

数字式温度传感器在冰箱检测系统中的应用

本文介绍了数字式温度传感器的工作原理、性能特征以及如何在冰箱检测系统中引入单总线技术,使用数字式温度传感器更好的实现温度的采集。