温度对荒漠沙蜥在体心脏单相动作电位的影响

采用吸附式电极记录了荒漠沙蜥在不同体温条件下 ,在体心脏的单相动作电位 (MAP:Monophasic Action Potential) .实验温度为 :5℃ ,10℃ ,15℃ ,2 0℃ ,2 5℃ ,30℃和 35℃ 7个温度等级 .结果表明 :(1)在最适温度 (2 0～ 2 5℃ )时 ,荒漠沙蜥心脏单相动作电位的基本波形与高等动物及人类基本相似 ;但也有其特殊性 :动作电位 0期除极期最大幅值为 11.4 2± 2 .5 8m V;复极 2期电位幅值基本保持恒定 ,呈平台期 (PP2 :Plateau Phase2 ) ;在复极 3期末 ,电位基本恢复到 0电位(膜电位为 0 m V) .(2 )随着体温的升高 (5～ 35℃ ) ,荒漠沙蜥心脏单相动作电位时程呈温度依赖性减小 ;0期最大除极速度 (Vmax)呈温度依赖性增加 (5℃为 77.0 8± 4 7.11m V/ms;35℃为 614.63±10 5 . 0 2 m V/ms) ;低于最适温度时 (2 0～ 2 5℃ ) ,在 2相平台期末 ,又出现一次除极电位 (后隆起波 ) .其最大电位为 0 .5 8± 0 .18m V.(3)随着体温的升高 ,荒漠沙蜥心脏单相动作电位复极 1期电位呈温度依赖性降低 (5℃为 2 .2 4± 1.31m V/ms;35℃为 0 .82± 0 .4 9m V/ms) .(4 )心电图 (ECG)的同步记录表明 :心电图中的 QRS波与心脏单相动作电位 0期除极完全相对应 ;T波与动作电位的复极 3期相对应 .     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

低温电解渗硫及其应用研究

本文研究了１８ＣｒＭｎＴｉ钢渗碳＋低温电解渗硫工艺及硬质合金刀具低温电解渗硫工艺．考核了刀具的耐用度。试验结果表明．低温电解渗硫提高了切削刀具的使用寿命。     

关于理想气体任意准静态直线过程的最高温度点与吸放热转折点

讨论理想气体任意准静态直线过程吸热放热问题时，关键是如何确定过程中吸放热转折点的位置．阐述了最高温度点与吸放热转折点并不重合的原因，并给出了确定最高温度点和吸放热转折点的方法．     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

Mathematical modeling of crystallization analysis fractionation (Crystaf) of polyethylene

Four polyethylene samples (PE) with different molecular weight distributions (MWD) were analyzed by crystallization analysis fractionation (Crystaf) at several cooling rates to investigate the effect of MWD and cooling rate on their Crystaf profiles. Using these results, we developed a mathematical model for Crystaf that considers crystallization kinetic effects, which are ignored in all previous Crystaf models. The Crystaf model we proposed can fit the experimental Crystaf profiles of the 4 polyethylene resins very well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2749–2759, 2006     

回收碘的研究

主要介绍了磷化工厂含碘烟气中碘元素通过富集，沉淀回收的方法。对碘的回收的影响因素很多，主要讨论温度、pH值、沉淀剂的种类与碘回收的关系，并且通过实验找出最佳的工艺参数并确定经济合理、适用性广的工艺流程。     

智能化44点啤酒发酵温度巡测仪

本文将八十年代最新研制的集成温度传感器ＡＤ５９０、８０９０单片机，可编程逻辑器件ＧＡＬ－１６Ｖ８Ａ等新器件及智能化新技术，集中应用于啤酒发酵过程的温度检测。与传统人工测温相比，具有测温精度高、稳定性好、反应快、可远距离自动检测、定时打印，减轻工人劳动强度、调节啤酒发酵温度的响应速度快等特点。     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

Partial molal heat capacities of aqueous tetraalkylammonium bromides as functions of temperature

Enthalpies of solution have been measured from 5 to 85°C for aqueous tetraethyl- and tetrapropylammonium bromides, and the integral heat method is employed to evaluate for these electrolytes over a wide temperature range. Data taken from the literature have been used to evaluate for aqueous Bu₄NBr over a similar temperature range. These data, along with similar data for Me₄NBr, previously reported, have been used to evaluate absolute ionic heat capacities. While the absolute values agree only qualitatively with two other methods of division, the temperature dependences of the three methods essentially agree up to 65°C. Heat capacities due to structural effects on the solvent, obtained by subtracting the inherent heat capacities of the ions, are extraordinarily positive for all four tetraalkylammonium ions and have negative temperature coefficients, indicating that all four ions, including the tetramethylammonium ion, are structure-making ions.