TiO2 粉末催化剂光催化降解室内 空气中有机污染物

本文制备了一系列 TiO2粉末催化剂, 用光催化法降解室内空气中各种微量有机污染物,最终降解率 接近 100%. 考察了晶型对光催化剂性能的影响, 结果表明,锐钛矿型 TiO2 的催化性能最好. 最后,分析了 TiO2 光催化反应机理.     

沉淀法制备CeO2超微粉末

采用过氧化氢－－氨水沉淀法在较低温度下制备ＣｅＯ２超微粉末。试验表明，溶液起始浓度及焙烧温度以形成粉素晶体粒径有一定影响。焙烧温度在２２０－８５０℃，所得ＣｅＯ２微粉均为立方晶系，透射电测试表明，粒子基本呈球形，晶体平均粒径随焙烧温度升高而增大。控制适当条件，可制得粒径范围在５－１３ｎｍ，比表面积１１１．８ｍ＾２／ｇ的ＣｅＯ２超微粉末。     

K2NiF4型结构的A2－xSrxBO4(A＝La, Dy, B＝Mn, Fe, Co, Ni)希土复合氧化物的合成

以典型的轻希土镧和重希土镝及碱土金属锶作为Ａ位离子，以过渡金属锰、铁、钴、镍作为Ｂ位离子，合成了Ｋ２ＮｉＦ４型结构的Ａ２－ｘＳｒｘＢＯ４希土复合氧化物，采用粉末Ｘ射线衍射技术考察了反应条件等因素对生成Ｋ２ＮｉＦ４型四方（Ｔ）结构上析影响，实现结果表明，四方结构的形成不仅与几何因素有关，而且与各组分的物理化学性质有关。各个不同的组成，生成四方相的温度范围也有所不同。适当地提高反应温度以及延长灼烧时间     

纳米二氧化锆制备过程的DSC、TGA和XRD研究

用ＤＳＣ、ＴＧＡ和ＸＲＤ技术研究了在沉淀法制备纳米ＺｒＯ２的过程中，残留ＮＨ４Ｃｌ、ｐＨ值、滴加方式、以及结构稳定剂Ｙ２Ｏ３的添加量对结晶过程的影响。结果表明，残留ＮＨ４Ｃｌ使结晶化温度降低，使放热过程变为吸热过程。而ｐＨ值、滴加方式和结构稳定剂的添加对结晶过程无明显影响。     

乳化法—火焰原子吸收光谱法测定奶粉中的锌

用乳化剂ＯＰ将奶粉乳化成稳定的乳浊液，喷入空气－乙炔火焰中，以标准加入法测定锌，测定结果与灰化法一致，方法简便，准确。     

铜(Ⅰ)配合物[Cu(C8H4O2F3S)(PPh3)2]合成、性质、晶体结构及反应机理的探讨

Reaction of copper powder with 2-thenoyltrifluoroacetone and PPh₃ yielded the complex [Cu(C₈H₄O₂F₃S)(PPh₃)₂], which have been characterized by elemental analysis and IR spectra. The crystal is monoclinic, space group P2₁/n , a=1.0584(1), b=1.6738(1), c=2.2728(9) nm; β =94.22(2); V =4.0152 nm 3; Z=4; D_c=1.299 g·cm^-3; R=0.048, R_W=0.054. Copper (Ⅰ) ion is coordinated by two O and two P atoms forming distorted tetrahedron.     

Ein Beitrag über Oxide vom Typ AMO4 (A = Ti3+, Cr3+; M = Nb5+, Ta5+)

A Contribution on Ternary Oxides of the AMO₄-Type (A = Ti³⁺, Cr³⁺; M = Nb⁵⁺, Ta⁵⁺ ) CrNbO₄, CrTaO₄, TiNbO₄, and TiTaO₄ were prepared by CO₂-laser technique. X-ray single crystal investigations show a random distribution of the metal ions in Rutil type structure, space group D–P4₂/mnm. Calculations of the free energy of reaction between Ti₂O₃ and Nb₂O₅ show higher stability of TiO₂ beside NbO₂. In TiNbO₄ both metals exhibit the oxidation state +4.     

Mesoporous Titanium-containing Silicas. Synthesis and geometrical characteristics

Mesoporous titanium-containing silicas with TiO₂ contents from 1 up to 70 mol% were prepared. The obtained samples have been characterized by the powder X-ray diffraction data, the diffuse reflectance infrared Fourier transform method, and nitrogen adsorption at 77 K. Specific surface area, total pore volume, distribution pore volume on pore sizes were determined from nitrogen adsorption isotherm for synthesized titanosilicas. This revised version was published online in August 2006 with corrections to the Cover Date.