A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

多缓冲机制下ADPCM解码算法适应性研究

文章对不同缓冲机制下ADPCM解码算法的运行条件进行了分析与对比,利用最小二乘法,提出关于ADPCM解码函数输入数据量与函数输入缓冲区长度的条件关系式,量化了不同缓冲机制对算法适应性的影响;针对实验环境的特点,改进了IMA ADPCM解码算法.研究结果表明,采用多缓冲机制能显著提高ADPCM算法的适应性;改进后的解码算法效率较原算法提高约75%.     

钙钛矿ABX3型材料的结构与性质调控

近年来,钙钛矿太阳能电池由于其效率高、制造成本低、工艺简单等特点受到广泛关注,成为目前太阳能电池领域的研究热点。在钙钛矿太阳能电池中,无机-有机杂化ABX₃材料非常重要。它既作为光吸收材料,同时又作为载流子传输材料,因此它的光电性质直接影响到太阳能电池的效率。本文综述了调控钙钛矿型无机有机金属卤化物ABX₃结构和性质的几种途径。     

应用于NPC型逆变器的三电平不连续PWM方法

针对低频大功率二极管中点钳位( NPC)型逆变器控制系统的不连续空间矢量脉宽调制原理及控制策略的研究,提出三电平不连续空间矢量脉宽调制方法,相比于传统三电平空间矢量脉宽调制方法,在相同的开关频率下,此方法可以显著降低逆变器的开关损耗。同时,文中对三电平逆变器的中点电压不平衡问题以及在现场应用中可能出现的PN电平跳变问题进行分析,并提出解决方法。最后,针对本文提出的调制方法做中点电压的平衡控制,给出对于该算法基于仿真和实验的验证。     

基于无速度传感器的直接转矩控制系统优化

针对传统异步电机直接转矩控制系统在低速运行状态下存在磁链轨迹发生波动、转矩脉动大的问题,提出一种新型异步电机直接转矩控制策略。采用滑模控制和空间矢量脉宽调制技术(SVPWM: Space Voltage Pwlse-Width Modulation), 引入滑模控制器, 以提高系统对参数变化和外界干扰的鲁棒性。利用空间电压矢量脉宽调制技术产生系统所需要的任意期望空间电压矢量, 使磁链轨迹更趋近于圆形, 即降低了转矩和磁链脉动,又增强了系统的鲁棒性。同时引入无速度传感器技术, 以提高系统工程应用性。通过在Matlab/ Simulink软件仿真结果表明, 新型直接转矩控制系统改善了磁链轨迹波动并有效地降低了转矩脉动, 使转速估计具有较高精度。     

Incommensurate Phase in Λ-cobalt (III) Sepulchrate Trinitrate Governed by Highly Competitive N−H⋅⋅⋅O and C−H⋅⋅⋅O Hydrogen Bond Networks**

Phase transitions in molecular crystals are often determined by intermolecular interactions. The cage complex of [Co(C₁₂H₃₀N₈)]³⁺ ⋅ 3 NO₃⁻ is reported to undergo a disorder-order phase transition at T_c1 ≈133 K upon cooling. Temperature-dependent neutron and synchrotron diffraction experiments revealed satellite reflections in addition to main reflections in the diffraction patterns below T_c1. The modulation wave vector varies as function of temperature and locks in at T_c3≈98 K. Here, we demonstrate that the crystal symmetry lowers from hexagonal to monoclinic in the incommensurately modulated phases in T_c1<T<T_c3. Distinctive levels of competitions: trade-off between longer N−H⋅⋅⋅O and shorter C−H⋅⋅⋅O hydrogen bonds; steric constraints to dense C−H⋅⋅⋅O bonds give rise to pronounced modulation of the basic structure. Severely frustrated crystal packing in the incommensurate phase is precursor to optimal balance of intermolecular interactions in the lock-in phase.     

Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂/N₂ and CO₂/N₂. The membrane with Br^? as a counter ion in the framework exhibited a H₂/N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄^?, the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂/N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.     

Allosteric Modulation of the CB1 Cannabinoid Receptor by Cannabidiol—A Molecular Modeling Study of the N-Terminal Domain and the Allosteric-Orthosteric Coupling

The CB₁ cannabinoid receptor (CB₁R) contains one of the longest N termini among class A G protein-coupled receptors. Mutagenesis studies suggest that the allosteric binding site of cannabidiol (CBD) involves residues from the N terminal domain. In order to study the allosteric binding of CBD to CB₁R we modeled the whole N-terminus of this receptor using the replica exchange molecular dynamics with solute tempering (REST2) approach. Then, the obtained structures of CB₁R with the N terminus were used for ligand docking. A natural cannabinoid receptor agonist, Δ⁹-THC, was docked to the orthosteric site and a negative allosteric modulator, CBD, to the allosteric site positioned between extracellular ends of helices TM1 and TM2. The molecular dynamics simulations were then performed for CB₁R with ligands: (i) CBD together with THC, and (ii) THC-only. Analyses of the differences in the residue-residue interaction patterns between those two cases allowed us to elucidate the allosteric network responsible for the modulation of the CB₁R by CBD. In addition, we identified the changes in the orthosteric binding mode of Δ⁹-THC, as well as the changes in its binding energy, caused by the CBD allosteric binding. We have also found that the presence of a complete N-terminal domain is essential for a stable binding of CBD in the allosteric site of CB₁R as well as for the allosteric-orthosteric coupling mechanism.     

Recent advances in BiOBr-based photocatalysts for environmental remediation

The efficient utilization of solar energy through photocatalysis is ideal for solving environmental issues and the development sustainable future. BiOBr-based semiconductors possess unique narrowed bandgaps and layered structures, thereby widely studied as photocatalysts for environmental remediation. However, a little has been focused on the comprehensive reviewing of BiOBr despite its extensive and promising applications. In this review, the state-of-the-art developments of BiOBr-based photocatalysts for environmental remediation are summarized. Particular focus is paid to the synthetic strategies for the control of the resulting morphologies, as well as efficient modification strategies for improving the photocatalytic activities. These include boosting the bulk phase by charge separation, enhancing the spatial charge separation, and engineering the surface states. The environmental uses of BiOBr-based photocatalysts are also reviewed in terms of purification of pollutants and CO₂ reduction. Finally, future challenges and opportunities of BiOBr-based materials in photocatalysis are discussed. Overall, this review provides a good basis for future exploration of high-efficiency solar-driven photocatalysts for environmental sustainability.