Shape memory behavior in Fe3Al-modeling and experiments

The Fe₃Al alloy with D0₃ structure exhibits large recoverable strains due to reversible slips. Tension and compression experiments were conducted on single crystals of Fe₃Al, and the onset of slip in forward and reverse directions were obtained utilizing high-resolution digital image correlation technique. The back stress provides the driving force for reversal of deformation upon unloading, resulting in a superelastic phenomenon as in shape memory alloys. Using density functional theory simulations, we obtain the energy barriers (GSFE – generalized stacking fault energy) for {1?1?0}〈1?1?1〉 and {1?1?2}〈1?1?1〉 slips in D0₃ Fe₃Al and the elastic moduli tensor, and undertake anisotropic continuum calculations to obtain the back stress and the frictional stress responsible for reversible slip. We compare the theoretically obtained slip stress magnitudes (friction and back stress) with the experimental measurements disclosing excellent agreement.     

Determining the micro-optical element surfaces profiles using transmission deflectometry with liquids

We propose a method for simultaneously measuring the front and back surface profiles of transparent optical components. The proposed method combines dual wavelength transmission deflectometry with liquids to record distorted phases at different wavelengths, and then numerically reconstructs the three-dimensional phase information to image the front and back surfaces of the lens. We propose a theoretical model to determine the surface information, and the imaging of achromatic lenses is experimentally demonstrated. Unlike conventional transmission deflectometry, our proposed method supports direct observation of the front and back surface profiles of the optical elements. Compared with other techniques such as interferometry, the proposed setup is simpler to align, has lower cost, and does not require coherent illumination. The proposed method can be applied to normal transmission deflectometry for determining the three-dimensional surface profiles of optical components.     

Formation of longitudinal aggregation of inclusions in bulk sapphire and yttrium‐aluminum garnet grown by horizontal directed crystallization method

It is shown that the formation of longitudinal aggregation of inclusions in bulk sapphire and yttrium‐aluminum garnet (YAG) grown by the method of HDC is caused by local accumulation of impurities, disturbance of morphological stability of the crystallization front and capture of inclusions and impurities in the nodal region of the melt two‐vortex convection. Studied is the influence of thermal and geometrical parameters of the melt and the shape of the crystallization front on the conditions of the formation of the capture of inclusions.     

Single‐crystalline gold microplates grown on substrates by solution‐phase synthesis

Chemically synthesized single‐crystalline gold microplates have been attracting increasing interest because of their potential as high‐quality gold films for nanotechnology. We present the growth of tens of nanometers thick and tens of micrometers large single‐crystalline gold plates directly on solid substrates by solution‐phase synthesis. Compared to microplates deposited on substrates from dispersion phase, substrate‐grown plates exhibit significantly higher quality by avoiding severe small‐particle contamination and aggregation. Substrate‐grown gold plates also open new perspectives to study the growth mechanism via step‐growth and observation cycles of a large number of individual plates. Growth models are proposed to interpret the evolution of thickness, area and shape of the plates. It is found that the plate surface remains smooth after regrowth, implying the applicability of regrowth for producing giant plates as well as unique single‐crystalline nano‐structures.     

Mechanically Adaptive and Shape‐Memory Behaviour of Chitosan‐Modified Cellulose Whisker/Elastomer Composites in Different pH Environments

Biomimetic polymer composites with water‐active mechanically adaptive and shape‐memory behaviour in different pH environments are synthesised by using chitosan‐modified cellulose whiskers (CS‐CWs) as the stimulus‐responsive phase and thermoplastic polyurethane (TPU) as the resilient matrix. The effect of surface modification on the mechanically adaptive behaviour of CS‐CW/TPU composites is investigated by using three representative solutions with various pH values. The results show that surface modification significantly enhances the modulus contrast under wet and dry conditions with the acidic solution as the stimulus, while maintaining the high modulus contrast with the basic solution as the stimulus. CS‐CW/TPU composites also exhibit excellent shape‐memory effects in all three solutions that are comparable to those pristine CW/TPU composites. Furthermore, activation of force generation in the stretched CS‐CW/TPU composites by water absorption/desorption was observed.     

Theoretical analysis of the local orientation effect and the lift‐hyperlayer mode of rodlike particles in field‐flow fractionation

We investigated theoretically the effects of the cross‐stream migration and the local average orientation of rodlike particles on the shape‐based separation using field‐flow fractionation. The separation behavior was analyzed by comparing the retention ratios of spheres and rods. The retention ratio of a rod was evaluated through the derivation of its cross‐sectional concentration profile by considering the rod migration and the local average orientation. Our study in various flow conditions showed that the rod migration, caused by the hydrodynamic interaction with a wall, can affect the separation behavior as a lift‐hyperlayer mode. We also demonstrated that the local average orientation, which is a function of a local shear rate and a rotational diffusivity, results in the transverse diffusivity that is different from its perpendicular diffusivity. These results suggest that the experimental separation behaviors of rods in field‐flow fractionation may not be fully explained by the current theory based on the normal mode and the steric mode. We also characterized each condition where one of the normal mode, the steric mode of spheres, and the lift‐hyperlayer mode of rods is dominant.     

A discussion on mass resolution in secondary ion mass spectrometry

Mass resolution is a very important parameter for mass spectrometry. It is necessary to compare the mass resolution between the newly developed TOF-SIMS and the conventionally high-performance magnetic SIMS. However, the definitions of mass resolution for these two types of instruments are quite different. Whether it is possible to compare mass resolution and how to do such comparison is a challenge. This problem was raised officially during the 2012 ISO/TC 201 meeting at Tampa, Florida, the United States and the long-term cooperation with ISO started afterwards. The definition of mass resolution is one of the most important and fundamental problems for mass spectrometry and should attract significant attention. Here, some detail discussions on mass resolution as well as the related experimental studies in the past few years, including the collaborations with ISO/TC 201/SC6 and SC1 are summarized. This summary covers the common problem for almost all the current existing and still used definitions of mass resolution. A reasonable new definition for mass resolution considering the peak shape or resolution function has been proposed, which has also been confirmed by using experimental studies of the mass resolution comparison between TOF and magnetic SIMS. This study lays a foundation for the future mass resolution comparisons between different mass spectrometry.     

Effect of methoxy position on dynamic mechanical and shape memory properties of methoxyphenol-based polybenzoxazines

Abstract

Two series of benzoxazines were synthesized from o-, m-, and p-methoxyphenols, two polyetheramines with different molecular weights, and formaldehyde. The glass transition temperatures (T _gs) of m-methoxyphenol-based polybenzoxazines are respectively higher than those of o- and p-methoxyphenol-based counterparts. The polybenzoxazines exhibit thermally induced one-way dual-shape memory behavior based on T _g, and the o- and p-methoxyphenol-based polybenzoxazines exhibit higher shape memory performance than m-methoxyphenol-based counterparts under motion constraints.     

Electrospun hyperbranched polylactic acid–modified cellulose nanocrystals/polylactic acid for shape memory membranes with high mechanical properties

The polylactic acid (PLA) nanofiber membranes reinforced with hyperbranched PLA‐modified cellulose nanocrystals (H‐PLA‐CNCs) were prepared by electrospinning. The H‐PLA‐CNCs and the nanofiber membranes were researched by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The outcomes embodied that the cellulose nanocrystals (CNCs) could be successfully improved by the hyperbranched PLA, which would offer powerful CNCs/matrix interfacial adhesion. Thus, the mechanical and shape memory properties of PLA can be improved by adding the H‐PLA‐CNCs. In particular, when the addition of H‐PLA‐CNCs was 7 wt%, the tensile strength and an ultimate strain of PLA composite nanofiber membranes was 15.56 MPa and 25%, which was 228% and 72.4% higher than that of neat PLA, respectively. In addition, the shape recovery rate of the PLA/5 wt% H‐PLA‐CNCs composite nanofiber membrane was 93%, which was 37% higher than that of neat PLA. We expected that this present study would provide unremitting efforts for the development of more effective approaches to prepare biology basic shape memory membranes with high mechanical properties.     

逆向工程中一种鲁棒的平移对称提取算法

为了解决逆向工程中平移对称提取的问题,提出了一种鲁棒的提取算法.首先利用特征线将模型分割成体素的集合,然后计算各个体素的形状分布曲线,通过形状分布曲线匹配的方式获取了几何形状相似的体素,并利用最小包围盒从中提取大小相似的体素,以构成对称体素的集合.利用鲁棒的PCA方法估算对称体素的初步对称信息,在此基础上利用迭代最近点算法对提取的平移对称进行优化.采用一个机械零件的三角网格模型进行实验的结果表明,体素分割结果对应构成模型的各个特征,具有明显的工程语义,对称提取结果的误差较小并具有较强的鲁棒性.