Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

冷轧带钢局部高点卷取过程起筋控制的建模与仿真

为了研究带钢局部高点卷取起筋的控制方法，利用三维弹塑性变形基本理论，并引入带钢塑性流动因子，建立了弹塑性卷取应力和起筋量模型.基于应力函数假设、S. Timoshenko最小功原理和伽辽金虚位移法建立了起筋带钢的应力场分布和可用于在线计算的起筋临界卷取张力设定模型.仿真结果表明：局部高点在径向累积叠加所引起的带钢张力不均匀分布和轴向压应力是导致带钢起筋的主要原因；起筋量随局部高点高度、卷径和卷取张力增加而增大，薄带钢比厚带钢起筋量增幅明显；临界卷取张力随卷径、带钢厚度和局部高点高度增大而减小.     

矩形型钢弯曲回弹曲率半径r值的确定

文章在分析矩形型钢弯曲变形过程及应力与应变等方面的关系的基础上，推导出工件曲率半径与工件回弹后曲率半径之间的关系，从而确定了凸模半径。     

U-统计量尾概率级数的收敛性

本文对相当广泛的一类权函数和边界函数给出了U-统计量尾概率级数收敛的充分条件.     

Exploiting the diversity of time scales in the immune system: A B-cell antibody model

Using the continuous shape space formalism, we develop an immune system model involving both B lymphocytes and antibody molecules. The binding and cross-linking of receptors on B cells stimulates the cells to divide and, with a lag, to secrete antibody. Using the method of multiple scales, we show how to correctly formulate long-time-scale equations for the population dynamics of B cells, the total antibody concentration, and rate of antibody secretion. We compare our model with previous phenomenological formulations.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

An optical measurement of vortex shape at a free surface

We have proposed an optical method of vortex shape measurement based on Fourier transform profilometry (FTP) and verified it by experiment. The results of our experiment proposed in this paper show that FTP can efficiently reconstruct the vortex shape at a free surface and this method is suitable for wide use in studying such problems as liquid shear flow, wake of an object, flow behind a bluff body, and wetting angle.     

CaractErisation Par DSC Des Sequences De Transformation Au Cours D'un Chauffage Lent Des Alliages Amf A Base De Cu–Al–Ni

Quenching of the eutectoidal composition of the shape memory alloys (SMA’s) allowed us to display the gradual transition of the martensitic structure as a function of the composition. Indeed, we have verified that for low Al and Ni percentages, the martensite structure obtained is β′, while, for high Al and Ni (Al<13.3 mass%) contents, the martensite structure is essentially of β₁′ type. Elsewhere, we have observed that a nickel addition (<4.3 mass%) operates simultaneously on the composition of the eutectoidal pointand the domain of the different martensitic structures types. During reheating of the quenched structure, the transformation sequences of the martensite to the parent phase (β1), then the decomposition of the later phase into the equilibrium phases, and finally, the redissolution of all phases to form the β phase at high temperature, are rather similar. This revised version was published online in August 2006 with corrections to the Cover Date.     

Active long pulse shaping technique of pulsed CO2 laser using multi-pulse discharge control

We describe the pulse forming of pulsed CO₂ laser using multi-pulse superposition technique. Various pulse shapes, high duty cycle pulse forming network (PFN) are constructed by time sequence. This study shows a technology that makes it possible to make various long pulse shapes by activating SCRs of three PFN modules consecutively at a desirable delay time with the aid of a PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a high voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage by driving the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence.We investigated various long pulse shapes as different trigger time intervals of SCRs among three PFN modules. As a result, we could obtain laser beam with various pulse shapes and durations from about 250 to 1000 μs.     

LocalH-theorem for a kinetic variational theory

A localH-theorem is derived for a recently proposed extension of Enskog kinetic theory to a dense model fluid composed of particles with interactions extending beyond a hard core.On leave from: Katedra Fizyki, Uniwersytetu Szczecinskiego, 70-451 Szczecin, Poland.