用FTIR定量测定聚对苯二甲酸乙二酯晶区和非晶区反式构象含量

用傅里叶变换红外分光光度计测定不同条件下退火处理的聚对苯二甲酸乙二酯膜的谱图, 用谱带分离技术对归属于反式构象的1340cm^-^1谱带进行阻尼最小两乘分峰处理, 结合属左右式构象贡献的1454cm^-^1谱带, 用线性回归分析的方法获得晶区反式构象、非晶区反式构象、非晶区左右式构象的百分含量。     

钛硅分子筛的结构表征及催化性能研究

以ＴＰＡＢｒ为模板剂，氨水等为碱源合成了钛硅分子筛ＴＳ－１，并利用ＸＲＤ，ＩＲ，元素分析，ＵＶ－ＶＩＳ，热分析等手段对合成的分子筛进行了表征，通过丙烯环氧化反应合成的ＴＳ－１催化性能。结果结果，ＴＳ－１凝胶与产品的硅钛与基本一致；随着硅钛比的降低，ＴＳ－１由单斜晶系过渡为正交晶系，在硅钛比为１２９－１６．７的范围内，随着进入骨架的钛量增加，单胞体积增大；     

Thermal lens spectrometric determination of hexavalent chromium

The applicability of thermal lens spectrometry (TLS) for quantification and routine determination of hexavalent chromium was investigated by using a collinear dual beam thermal lens spectrometer. In aqueous solutions the LOD of 0.1 μg l⁻¹ was obtained for Cr(VI) by using 160 mW laser power. The performance of the technique was verified by the determination of hexavalent chromium in standard reference water samples (NIST SRM 1643a and NIST SRM 1643c) and comparing the results for Cr(VI) in CCA (Cr, Cu, As)-treated timber extracts to concentrations obtained by atomic absorption spectrometry (AAS). Good agreement between the TLS results and reported values for Cr(VI) in SRMs as well as AAS results for Cr(VI) in CCA-treated timbers confirmed that TLS is a reliable and accurate analytical technique applicable for the determination of Cr(VI) in aqueous solutions at concentration levels 0.5–100 μg l⁻¹.     

Conversions between ordered and disordered cellulose. Effects of mechanical treatment followed by cyclic wetting and drying

An investigation into the effects of mechanical treatment and hydration on the order of cellulose substrates (microcrystalline cellulose and Cladophora cellulose) was performed by the use of ball milling followed by cyclic wetting and drying. The results, monitored by¹³C-CP/MAS NMR-spectroscopy, were evaluated by calculation of the crystallinity indices and principal component analysis of the NMR data acquired. The results showed that a large part of the disorder induced by the mechanical treatment of cellulose by ball milling is reversible and reordering upon hydration leads to the cellulose I form initially present. The C4 signals corresponding to the reversibly disordered cellulose chains are observed in the amorphous region between 79 and 86 ppm in the¹³C-CP/MAS NMR-spectra together with signals from cellulose chains on the surface of ordered regions. The peak cluster which contains the C2, C3 and C5 ring carbons can be divided into two specific spectral regions; one between 74 and 77 ppm largely originates from ring carbons within disordered cellulose structures, and one between 70 and 74 ppm contains larger contributions from ordered cellulose. The behaviour of the celluloses upon milling is in accordance with a concept of ordered cellulose fibrils containing amorphous cellulose mainly as surface layers and induced reversible lattice distortions.     

表面活性剂增敏2.5次微分极谱测定香豆素

拟定了表面活性剂增敏、2 .5次微分极谱测定香豆素的方法。在含 6.0× 10 -6 mol·L-13 氯 2 羟丙基 三甲基氯化铵的 0 .1mol·L-1KH2 PO4 Na2 HPO4 (pH 6.8)缓冲液中 ,香豆素还原波 [峰电位Ep=- 1.60V(vs .SCE) ]的 2 .5次微分极谱峰峰电流e″p 与其浓度在 4 .0× 10 -7～ 6.0× 10 -5mol·L-1范围内呈良好线性关系 (r =0 .9998,n =10 ) ,检出限为 1.2× 10 -7mol·L-1。 13次平行测量 8.0× 10 -6 mol·L-1香豆素的峰电流 ,RSD为 1.5 %。该方法可用于中药白芷中香豆素的直接测定     

Molecular imprinting in ultrathin titania gel films via surface sol-gel process

Recent progresses of molecular imprinting in metal oxide matrices were summarized. Application of the surface sol-gel process to mixtures of organic carboxylic acids and titanium alkoxide provides ultrathin layers of titania gel (10-20 nm thick), in which molecule-sized cavities are kept intact upon removal of the organic templates. The imprinted cavity reflects the structural and functional features of the template molecule, and the enantioselective imprinting of dipeptide isomers is observed. Robustness and flexibility of the ultrathin titania layer is demonstrated by the formation of interconnected titania hollow structures. Possible practical applications and unsolved problems of this technique are discussed.     

α-Trifluoroacetyl-δ-valerolactone: synthesis, acyl-lactone rearrangement and unexpected easy decarboxylation of the rearranged product

Claisen condensation of δ-valerolactone and ethyl trifluoroacetate leads to α-trifluoroacetyl-δ-valerolactone, existing completely in CDCl₃ solution as an enol. Upon treatment of this cyclic 1,3-ketoester with aqueous HCl, an acyl-lactone rearrangement takes place. The structure of the resulting pyran was confirmed by an X-ray analysis. The ability of the rearrangement product to lose its carboxylic group under unexpected mild conditions was used for the synthesis of the corresponding 3-unsubstituted cyclic hemi-ketal.     

Thermal analysis of polysiloxanes, aromatic polyimide and their blends

Low molecular weight poly(dimethylsiloxane) and poly(methylphenylsiloxane) were synthesized and blended with polyimide (PI) at its precursor poly(amic acid) stage. FTIR analysis has proven the retention of polysiloxanes in polyimide after the ultimate curing of blends. Differential scanning calorimetric analysis was performed on polysiloxanes to elucidate the structures present in polymers while thermogravimetric analysis (TGA) was performed on polysiloxanes, polyimide as well as their blends to evaluate the thermal stability and to analyze the effect of polysiloxane incorporation in blends. Blends have shown synergistic improvement as compared to neat polyimide.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

1.2-Bis(pentamethylcyclopentadienyl)tetrachlorodisilane and its reduction to decamethylsilicocene

Reaction of pentamethylcyclopentadienyl(pentachloro)disilane (2), prepared from hexachlorodisilane and potassium pentamethylcyclopentadienide (Cp^*K), with a further equivalent of Cp^*K leads selectively to the title compound Cp^* ₂ Si ₂ Cl ₄ (3) which was characterized by NMR and X-ray structural data. Dehalogenation of 3 with four equivalents of sodium naphthalenide offers an alternative route for the synthesis of decamethylsilicocene (1). Dedicated to Professor Mitsuo Kira on the occasion of being honoured with the Wacker Silicon Award 2005.