Purification and partial characterization ofRhizomucor miehei lipase for ester synthesis

A commercialRhizomucor miehei lipase was purified by ammonium sulfate precipitation. Phenyl Sepharose 6 Fast Row hydrophobic interaction chromatography, and DEAE Sepharose Fast Flow anion-exchange chromatography. The recovery of lipase activity was 32% with a 42-fold purification. The molecular size of the purified enzyme was 31,600 Dalton and the pI 3.8. The enzyme was stable for at least 24 h within a pH range of 7.0-10.0, and 96.8% of the enzyme activity remained when kept at 30‡C for 24 h. Further, about 10–30% of the lipase activity was inhibited by K⁺, Li⁺, Ni⁺, Co²⁺, Zn²⁺, Mg²⁺, Sn²⁺, Cu²⁺, Ba²⁺, Ca²⁺, and Fe²⁺ ions and by SDS, but EDTA had no effect. Under the experimental conditions, the optimum temperature for the hydrolysis of olive oil was 50‡C (pH 8.0), and for the synthesis of 1-butyl oleate, 37‡C. It was concluded that hydrolytic activity of lipase alone is not a sufficient criterion for its synthetic potential. The optimal molar ratio of oleic acid and 1-butanol was 2:1 for 1-butyl oleate synthesis. The 1-butyl oleate yield was unaffected by purification of the enzyme after 12 h.     

Modern Synthetic Methods for Fluorine‐Substituted Target Molecules

Fluorine has come to be recognized as a key element in materials science: in heat‐transfer agents, liquid crystals, dyes, surfactants, plastics, elastomers, membranes, and other materials. Furthermore, many fluorine‐containing biologically active agents are finding applications as pharmaceuticals and agrochemicals. Progress in synthetic fluorine chemistry has been critical to the development of these fields and has led to the invention of many novel fluorinated molecules as future drugs and materials. As a result of the electronic effects of fluorine substituents, fluorinated substrates and reagents often exhibit unusual and unique chemical properties, which often make them incompatible with established synthetic methods. Thus, the problem of how to control the unusual properties of compounds with fluorine substituents deserves much attention, so as to promote the design of facile, efficient, and environmentally benign methods for the synthesis of valuable organofluorine targets.     

Vilsmeier formylation of 5,10,15-triphenylcorrole: expected and unusual products

5,10,15-Triphenylcorrole (1) reacts with the Vilsmeier reagent (POCl(3)/DMF) to give the corresponding 3-formyl derivative 3 as the major product. The regioselectivity of the reaction was proven by X-ray crystallography and only traces of the 2-formyl isomer were observed. A more polar product is also observed and this compound becomes the major product when an excess of DMF is used for the preparation of the Vilsmeier reagent, while the formation of the 3-formyl isomer is almost completely suppressed. X-ray crystallography allowed us to identify this compound as the fully substituted N-ethane bridged derivative 4, formed from the attack of the Vilsmeier reagent at the inner core of the macrocycle. This compound is unique among porphyrinoid macrocycles, and further confirms the peculiarity of corrole chemistry.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

Supersonic jet spectroscopy of naphthalene–fluorene bichromophoric cluster

We have investigated the supersonic jet spectroscopy and photophysics of 1-methylnaphthalene–fluorene (1MN–FL) cluster, and looked for indications of intramolecular electronic energy transfer (Intra-EET) from the FL (donor, D) to 1MN (acceptor, A). The clusters were identified by their time of flight (TOF) mass spectra. We observed clusters bands in the LIF spectrum near the region of 1MN origin. We have also observed cluster TOF–resonance enhanced multi-photon ionization (REMPI) spectrum near the electronic origin of the fluorene moiety. However, this spectrum was almost independent of the excitation wavelength, and was not observed in the LIF spectrum. This is probably due to fast Intra-EET resulting in lifetime broadening of the donor chromophore cluster spectrum, similar to that observed previously for the naphthalene–anthracene bichromophoric system.     

Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.     

分子内Diels-Alder反应在有机合成方面的新进展

本文按合成产物的结构类型,综述分子内 Diels-Alder 反应在有机合成方面的新进展。     

镁合金表面热喷涂WC-10Co-4Cr粒子沉积及分布特性

为了探究高速空气燃料热喷涂（AC-HVAF）过程中喷涂粒子撞击基材后的沉积特性。采用AC-HVAF热喷涂技术在AZ80镁合金基体上沉积WC-10Co-4Cr硬质涂层。通过离散沉积实验获得薄层沉积粒子,探讨各种沉积形貌的种类、形成原因、结合机制及射流中粒子的径向和轴向分布。结果表明：在AC-HVAF粒子沉积过程中,嵌入型沉积为主要的沉积形貌,同时包含少量的破碎型与空腔型沉积粒子。在涂层的形成过程中,嵌入型沉积对涂层/基体结合性能起重要作用;空腔型沉积的小颗粒及破碎型沉积的大颗粒是造成沉积效率下降的主要原因。喷涂粒子主要集中在射流中心,越靠近射流边缘,空腔型沉积粒子越多,最终导致AC-HVAF粒子射流呈现出空间分布特征。     

垂直弹射系统弹射初始阶段内流场数值分析

针对燃气活塞弹射装置在垂直发射系统中的应用,采用计算流体软件Fluent的源项法,用UDF(用户自定义函数)编译来实现火药燃气的质量、动量、能量向高压室的注入,对弹射初始阶段高压室和低压室内燃气流场进行了数值分析,得出以下结论:高压室压力在破膜前快速上升,破膜后缓慢上升的趋势,在高压上下两端压力应力集中,低压室呈中间和两端压力应力集中现象,同时高压室形成的低速燃气经导管产生激波形成超声速燃气流撞击低压室,并分析了压力和速度对弹射装置的影响。计算结果表明,该方法能够较好地仿真弹射装置燃气流场的特性,为弹射装置优化设计和装药设计提供理论依据。     

空化水射流研究现状及其应用

综述了高压水射流技术发展及应用过程,认为空化水射流是一种富有发展前途的高效新型射流．通过对空化水射流机理、空化数和冲击压力两个重要空化参数的分析,显示了空化射流的潜在优势．实验表明人工淹没空化射流具有较强的冲蚀效果,并克服了靶距范围的不足．简要介绍了该技术应用于火箭发动机内脏固体推进剂清洗工程的射流系统设计．