Treatment of coke plant wastewater by A/O fixed biofilm system

The long-term environmental impacts of wastewa-ter from coke plant can be very high, especially due to the discharge of large amounts of wastewater. The composition of coke plant wastewater is complicated and varies from one factory to another, depending …     

Purification and partial characterization ofRhizomucor miehei lipase for ester synthesis

A commercialRhizomucor miehei lipase was purified by ammonium sulfate precipitation. Phenyl Sepharose 6 Fast Row hydrophobic interaction chromatography, and DEAE Sepharose Fast Flow anion-exchange chromatography. The recovery of lipase activity was 32% with a 42-fold purification. The molecular size of the purified enzyme was 31,600 Dalton and the pI 3.8. The enzyme was stable for at least 24 h within a pH range of 7.0-10.0, and 96.8% of the enzyme activity remained when kept at 30‡C for 24 h. Further, about 10–30% of the lipase activity was inhibited by K⁺, Li⁺, Ni⁺, Co²⁺, Zn²⁺, Mg²⁺, Sn²⁺, Cu²⁺, Ba²⁺, Ca²⁺, and Fe²⁺ ions and by SDS, but EDTA had no effect. Under the experimental conditions, the optimum temperature for the hydrolysis of olive oil was 50‡C (pH 8.0), and for the synthesis of 1-butyl oleate, 37‡C. It was concluded that hydrolytic activity of lipase alone is not a sufficient criterion for its synthetic potential. The optimal molar ratio of oleic acid and 1-butanol was 2:1 for 1-butyl oleate synthesis. The 1-butyl oleate yield was unaffected by purification of the enzyme after 12 h.     

Modern Synthetic Methods for Fluorine‐Substituted Target Molecules

Fluorine has come to be recognized as a key element in materials science: in heat‐transfer agents, liquid crystals, dyes, surfactants, plastics, elastomers, membranes, and other materials. Furthermore, many fluorine‐containing biologically active agents are finding applications as pharmaceuticals and agrochemicals. Progress in synthetic fluorine chemistry has been critical to the development of these fields and has led to the invention of many novel fluorinated molecules as future drugs and materials. As a result of the electronic effects of fluorine substituents, fluorinated substrates and reagents often exhibit unusual and unique chemical properties, which often make them incompatible with established synthetic methods. Thus, the problem of how to control the unusual properties of compounds with fluorine substituents deserves much attention, so as to promote the design of facile, efficient, and environmentally benign methods for the synthesis of valuable organofluorine targets.     

Vilsmeier formylation of 5,10,15-triphenylcorrole: expected and unusual products

5,10,15-Triphenylcorrole (1) reacts with the Vilsmeier reagent (POCl(3)/DMF) to give the corresponding 3-formyl derivative 3 as the major product. The regioselectivity of the reaction was proven by X-ray crystallography and only traces of the 2-formyl isomer were observed. A more polar product is also observed and this compound becomes the major product when an excess of DMF is used for the preparation of the Vilsmeier reagent, while the formation of the 3-formyl isomer is almost completely suppressed. X-ray crystallography allowed us to identify this compound as the fully substituted N-ethane bridged derivative 4, formed from the attack of the Vilsmeier reagent at the inner core of the macrocycle. This compound is unique among porphyrinoid macrocycles, and further confirms the peculiarity of corrole chemistry.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

分子内Diels-Alder反应在有机合成方面的新进展

本文按合成产物的结构类型,综述分子内 Diels-Alder 反应在有机合成方面的新进展。     

Determination of the partition coefficients of the nonionic detergent C12E7 between lipid-detergent mixed membranes and water by means of Laurdan fluorescence spectroscopy

The membrane-water partition coefficient of the detergent C₁₂E₇ between water and C₁₂E₇/POPC mixed membranes has been determined by means of steady-state fluorescence spectroscopy. The emission spectra of the fluorescent probe Laurdan were used as an indicator of membrane composition at different membrane concentrations in the sample. The partition coefficient expressed as the ratio of the mole fractions of the detergent in the membrane and water phases is about 6^*10⁵ at low molar ratios of C₁₂E₇/POPC (R _c ) and decreases rapidly with increasingR _c . The limiting detergent content of the lamellar phase (R _c ^* >0.8) is indicated by a minimum ofP(R _c ).     

SSZ-53 and SSZ-59: two novel extra-large pore zeolites

The syntheses, structure solutions, and physicochemical and catalytic characterizations of the novel zeolites SSZ-53 and SSZ-59 are described. SSZ-53 and SSZ-59 were synthesized under hydrothermal conditions with the [1-(4-fluorophenyl)cyclopentylmethyl]trimethyl ammonium cation and 1-[1-(4-chlorophenyl)cyclopentylmethyl]-1-methyl azocanium cation, respectively, as structure-directing agents. The framework topology of SSZ-53 was solved with the FOCUS method, and the structure of SSZ-59 was determined by model building. Rietveld refinement of synchrotron X-ray powder diffraction data confirms each proposed model. SSZ-53 and SSZ-59 each possess a one-dimensional channel system delimited by 14-membered rings. Results from transmission electron microscopy, electron diffraction, catalytic experiments (spaciousness index and constraint index tests), and argon and hydrocarbon adsorption experiments are consistent with the proposed structures.     

Activation of trisacryl gels with chloroformates and their use for affinity chromatography and protein immobilization

In this study we describe the activation with chloroformates of Trisacryl-GF-2000, a new synthetic gel support that is stable, hydrophilic, and contains large amounts of hydroxyl groups available for activation. Of all the reagents tested, the activation withN-hydroxysuccinimide-chloroformate andp-nitrophenylchloroformate in organic solvents provides the best activation yield and subsequent coupling. When Trisacryl was activated in acetone with the chloroformates in the presence of 4-dimethylaminopyridine as base and catalyst, up to 30% of the hydroxyl groups, (i.e., 1/repeating unit) could be activated. Amino-containing ligands and proteins could be coupled to these carriers at pH 8 or higher. For better results in affinitychromatographic applications, spacers of ε-amino caproic acid or diaminohexane were introduced. The efficacy of these columns was demonstrated by purification of enzymes, antibodies, and antigens. The performance of these new columns were compared with that of Sepharose columns activated in various ways. In every case, the properties of the Trisacryl support proved superior with particular reference to the purity of the product obtained.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.