分形子-电子相互作用导致的电阻率

利用推广的Hnsch-Mahan量子输运方程,求解了分形子-电子相互作用系统的电阻率.克服了电阻率的低温发散困难,给出了电阻率反常处的温度.     

Steady flux in a continuous-space Sinai chain

We examine the steady-state flux of particles diffusing in a one-dimensional finite chain with Sinai-type disorder, i.e., the system in which in addition to the thermal noise, particles are subject to a stationary random-correlated in space Gaussian force. For this model we calculate the disorder average (over configurations of the random force) flux exactly for arbitrary values of system's parameters, such as chain lengthN, strength of the force, and temperature. We prove that within the limitN1 the average flux decreases withN as J(N)=C/N and thus confirm our recent predictions that the flux in the discrete-space Sinai model is anomalous.     

Diffusion in Lorentz lattice gas automata with backscattering

The probability of first return to the initial intervalx and the diffusion tensorD _x are calculated exactly for a ballistic Lorentz gas on a Bethe lattice or Cayley tree. It consists of a moving particle and a fixed array of scatterers, located at the nodes, and the lengths of the intervals between scatterers are determined by a geometric distribution. The same values forx andD _x apply also to a regular space lattice with a fraction of sites occupied by a scatterer in the limit of a small concentration of scatterers. If backscattering occurs, the results are very different from the Boltzmann approximation. The theory is applied to different types of lattices and different types of scatterers having rotational or mirror symmetries.     

Beiträge zur Chemie der Pyrrolpigmente, 70. Mitt.: Zum aktiven Transport mit tripyrrinoiden Liganden

The tripyrrin carboxylic acid6 exhibits a pronounced efficiency for carrier mediated proton driven secondary active transport (counter transport) for a series of toxic or valuable cations in a bulk chloroform membrane. In case of Zn⁺⁺ ions the mechanism including complete concentration profiles forNerst diffusion layers and bulk phase have been established. This compound might be used for detoxification or enrichment of precious metals using membrane separation systems.

Herrn Prof. Dr.A. Neckel mit den besten Wünschen zum 60. Geburtstag gewidmet.     

Zum chemischen Transport von SiAs mit Iod — Experimente und Modellrechnungen

On the Chemical Transport of SiAs using Iodine — Experiments and Thermochemical Calculations Using iodine as transport agent siliconarsenide migrates in a temperature gradient. The direction of the migration depends on the chosen temperature and the concentration of the transport agent. The transport rates were measured for various transport agent concentrations (0.0002 ? C(I₂) ≥ 0,02 mmol/cm³) and for various mean transport temperatures (650 ? T? ? 1 000°C). For low temperatures (e.g. T₁ = 750°C→T₂ = 850°C), low iodine concentrations (e.g. C(I₂) = 0.001 mmol/cm³) and in the presence of H₂O (from wall of silica ampoule) the following exothermic reaction is responsible for the deposition of SiAs-crystals in the sink region:

• SiAs_s + 4HI_g = SiI_4,g + 2H_2,g + 1/4As_4,g

In case of higher temperatures (e.g. T₂ = 1 050°C→T₁ = 950°C) and higher iodine concentrations (e.g. C(I₂) = 0.02 mmol/cm³) SiI_4,g is the transport agent. According to model calculations the following endothermic reaction is responsible for the migration of SiAs to the region of the lower temperature:

• SiAs_s + SiI_4,g = 2SiI_2,g + 1/4As_4,g

The heterogeneous and homogenous equilibria will be discussed and an explanation of the non equilibrium transport behaviour of SiAs is given. Thermochemical data of SiAs are characterized by the quartzmembrane zero manometer technique and further verified by model calculations.     

The Employ of Multiple Voltammetric Pulses for the Study of the Adsorption of Bipyridilium Pesticides in River Sediment

The multiple square‐wave voltammetry (MSWV) allied to gold microelectrode (Au‐ME) was used to establish an electroanalytical procedure for the determination of the paraquat and diquat pesticides in river sediment samples. For both pesticides, two reduction peaks, at around ?0.70 V (peak 1) and around ?1.00 V vs. Ag/AgCl 3.00 mol L^?1 (peak 2), with profile of the totally reversible redox process, were observed. The experimental and voltammetric conditions showed that the best conditions to reduce paraquat and diquat were a pH of 6.0, a frequency of 250 s^?1, a scan increment 2 mV, a square‐wave amplitude of 50 mV and pulse number of 8 pulses of potential in each step of staircase of potential. Under such conditions, the detection limit of 0.044 μg L^?1 (0.044 ppb) and 0.360 μg L^?1 (0.360 ppb ) for peak 1 and peak 2 of paraquat and 0.159 μg L^?1 (0.159 ppb) and 0.533 μg L^?1 (0.533 ppb) for peak 1 and peak 2 of diquat, respectively, were obtained. These results are an order of magnitude of about two less than those obtained and published in the literature. Also, the electroanalytical procedure proposed was applied for the determination of adsorption isotherms of pesticides on river sediments samples collected from Mogi‐Guaçu River in Sao Paulo State, Brazil. The experimental data were fitted using the Langmuir and Freundlich isotherms models; and the results indicated low intensities of adsorption process of the pesticides in the samples employed with distribution coefficients (K_d) lower 5.0, and paraquat showed slightly higher affinity than diquat in the sediments. The increase in organic matter and organic carbon leads to an increase in the K_d values, and consequently an increase in the organic matter constant (K_OM) organic carbon constant (K_OC) values. All results demonstrated that isotherms “L” type in the Giles classification were obtained, indicating that sediments have a medium affinity for the pesticides, and no strong competition from the solvent used (in this case Na₂SO₄) for adsorption sites occurs.     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

Solvent extraction and bulk liquid membrane transport of Co(II) and Ni(II) ammine cations by proton-ionizable crown ethers

Separation efficiencies and selectivities in solvent extraction of Co(II) and Ni(H) ammine cations from aqueous solutions into chloroform and toluene and in transport through bulk toluene membranes by proton-ionizable crown ethers have been determined. Six proton-ionizable crown ethers with differing lipophilicities, polyether cavity sizes and ionizable groups (carboxylic and sulfonic acid functions) were examined. Higher selectivity and efficiency for Co(II) ammine cation extraction was observed for the more lipophilic, proton-ionizable crown ethers. Highly lipophilic crown carboxylic acids provided effective and selective transport of Co(II) ammine cations through bulk toluene membranes.Presented in part at the 6th International Symposium on High Purity Materials in Science and Technology: Preparation, Characterization and Application of Well-Defined Materials, Dresden, GDR, May 1985, Poster D91, Poster Abstracts, pp. 144, 145.All extraction and transport experiments were conducted at this location.     

Electrical conduction nature and phase transition in CaTi1−x FexO3−δ (x = 0.1–0.5)

Transport numbers for oxygen ions and protons are measured by an emf method in the system CaTi_1?x Fe_xO_3?δ (x = 0.1–0.5) in the oxidizing and reducing atmospheres in the temperature interval 973–1173 K. It is shown that the compounds under study are mixed ion-electron conductors at small iron concentrations and electron conductors, at large iron contents. The proton conductivity in the compounds is very poor and does not exceed 0.5% in air. On the basis of the temperature dependences of transport numbers for ions and linear expansion, it is established that the CaTi_0.9Fe_0.1O_3?δ system has a phase transition of a second order in a reducing environment at 1020–1050 K. The total and partial electron conductivities of CaTi_0.9Fe_0.1O_3?δ are studied as a function of the partial pressure of oxygen at 1173 K. The nature of electroconduction in CaTi_1?x Fe_xO_3?δ is discussed.     

Beiträge zur Chemie der Pyrrolpigmente, 44. Mitt.: Gallenfarbstoffe als Ionophore

The carrier mediated transport of cations using model compounds of the verdinoid and rubinoid bile pigment structural type as ionophores is studied. Verdinoid bile pigments turn out to be very effective carriers for cations exhibiting a pronounced selectivity for certain transition metal ions like Cr^+-+, Fe⁺⁺, Cu⁺⁺ and Zn⁺⁺. The scope of this behaviour of verdinoid bile pigments is compared to [18]-crown-6 and meso-tetraphenylporphin and is discussed with regard to structural, biological, analytical and technical implications.