Half-width temperature dependence of nitrogen broadened lines in the ν2 band of H2O

Forty-seven N₂ broadened water vapor line-widths have been measured in the 1845-2140 cm⁻¹ spectral range with a Fourier Transform spectrometer in the 258-330 K temperature range at a spectral resolution of 0.005 cm⁻¹ for the lines with upper state rotational quantum number up to 16. The measured exponents of the temperature dependence of the width exhibit a large range of values from 1.60 to −0.86. Theoretical calculations were made using a semi-empirical technique based on the Anderson theory. The calculated broadening coefficients as well as the temperature exponents for the half-width agree satisfactory with measured values.     

地面附近的高空核爆电磁脉冲环境

 主要研究在高空核爆的双指数类型电磁脉冲平面波入射时，地面附近的电磁脉冲环境。计算给出了在不同入射波状态，不同地表介质电气特性和距地面不同高度等条件下的电磁脉冲环境参数，归纳了一些规律性认识。结果显示：地面附近的电场会随距地面高度的不同而发生显著的变化，对于水平场分量，其反射场总是试图抵消入射场，而对于垂直场分量，其反射场叠加在入射场上，使得地面附近的垂直场强幅值一般大于入射波场强幅值；当入射波仰角增大时，合成电场波形的脉冲宽度会变宽；地表介质的电气特性参数不同也会对地面附近电场的波形和幅值造成一定的影响。     

高斯光束计算平板波导自由传输区远场分布及其修正

对近轴近似条件下求解亥姆霍兹方程得到的高斯光束显式传播公式做了分析，同时，基于基尔霍夫衍射理论，在菲涅耳近似的条件下给出了相应的高斯光束在远场的传播公式，在此基础上，对近轴近似条件做出了定量分析，给出了这个近似条件引入的误差，提出了一种计算高斯光束远场分布的修正方法，并采用有限差分-光束传播方法(FD-BPM)来检验各种方法的准确性。把这种修正方法应用到平面光集成波导器件，如阵列波导光栅(AWG)、蚀刻衍射光栅(EDG)等器件的设计和模拟中，可以大大降低工作的复杂性，同时可以得到精确的结果。     

向列液晶表面弹性能K13项的物理效应及检验方法

通过解析推导和数值计算的方法，得到了平衡态指向矢满足的微分方程和边界条件.研究了表面弹性能K13项对磁场作用下的弱锚定向列液晶盒Fréedericksz转变性质的影响.结果表明，表面弹性能K13项的存在对液晶系统的自由能有很大的影响，从而改变转变的性质，诱导液晶盒在阈值点发生一级Fréedericksz转变.给出了发生一级转变的物理条件，它除了与液晶的结构和材料有关外，还依赖于液晶表面弹性能K13项，同时给出了由此判断K13项是否存在的检验方法. 关键词： 表面弹性能K13项 弱锚定 Fréedericksz转变     

南淝河水质S-P模型参数K1、K2的估值

对南淝河河流水质S-P模型中碳化BOD衰减系数K1和大气复氧系数K2分段进行了估值.根据实验测定数据,用最小二乘法、图解法和两点法等3种方法对K1进行了估值,应用公式估算法对K2进行了估值,并对估值的结果与南淝河的有机污染状况进行了对比和分析,从而为模型提供准确的参数值,也为南淝河的水污染控制和水质规划提供有益的借鉴.     

表面纤维直径与羊毛机织精纺面料的刺痒感

通过前臂试验对26种轻薄型羊毛机织精纺面料和7种其他纤维的轻薄型机织面料的刺痒感进行了比较研究,并用显微镜对部分轻薄型羊毛机织面料的表面纤维分布进行了研究。结果表明多数毛织物在温度为(24±1)℃、相对湿度为(65±5)％的条件下存在刺痒感,并且毛织物的刺痒感与其表面纤维的平面直径及直径大于26μm的表面纤维根数密切相关。     

"溶液吸附法测定活性炭比表面积"实验的改进

研究了吸附荆的颗粒度、吸附时间、吸附温度、原始溶液浓度对吸附平衡的影响，确定了新的实验条件：粒状活性炭破碎至60．100目；70℃恒温振荡0．5h后，再于室温振荡吸附1．5h；原始溶液的溶质质量分数为2％左右．改进后，提高了实验精密度，缩短了实验时间．     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Ionic conductivity of epitactic MBE-grown BaF2 films

We studied parallel conductivities of pure BaF₂ films with thicknesses ranging from 35 to 300 nm, epitaxially grown on Al₂O₃(0 1 2) substrates by molecular beam epitaxy technique. The overall conductivities of the films are found to increase with decreasing thickness. The detailed investigation of the overall conductance as a function of the thickness permits the deconvolution of bulk and boundary effects, the latter being attributed to distinct space charge effects in the interface between BaF₂ film and Al₂O₃ substrate. The (extrinsic) Debye length (λ) is estimated to be about 8 nm at T=593 K, which corresponds to an impurity content of 10¹⁸/cm³ (singly ionized dopant assumed). This is consistent with the fact that we observed a constant boundary contribution for all investigated films (film thickness >4λ). It is also consistent with the Debye length observed in a previous report on CaF₂/BaF₂ heterolayers fabricated by the same technique, in which the low temperature enhancement was also attributed to space charges in BaF₂ [Nature 408 (2000) 946]. Only at low temperatures (below 370 °C), the conductance seems to be influenced by strain effect.     

Characteristics and structures of weak efficient surfaces of production possibility sets

This paper studies the characteristics and structure of the weak surface of the production possibility set. We apply techniques and methods of transferring a polyhedral cone from its intersection form to its sum form, identify an intersection representation of the production possibility set. We give the structure theorem of weak surface of the production possibility set, which includes three complementary slackness conditions. We define the input weak efficiency and output weak efficiency for different DEA models according to the representation of the intersection form. It investigates the characteristics of the weak surfaces, and proves the structure theorems of input weak DEA efficiency and output weak DEA efficiency. The structure theorems establish weighted combination of inputs and outputs that are weak DEA efficient. Numerical examples are provided for illustration.