绝缘表面和气体导电与湿度的关系

湿度对绝缘体表面电导和气体电导有一定的影响，但通常在湿度传感器的研究中忽略了气体电导的贡献。本文通过特殊设计装置来区分表面电导和气体电导，并分别从实验和理论上进行了定性的研究。     

非设计工况下叶轮进口附近的流动及其控制

对叶轮进口附近流动在偏离设计工况下的回流和汽蚀(空化)两大特性进行了系统的描述,阐述了它们的诱发机理及其对泵性能的影响.根据回流的诱发机理对诱导轮的作用进行了全面的分析,提出了控制回流发生的有效方法,从叶片进口流动这一角度完善了离心泵叶片设计理论.     

亚油酸盐在45钢电极界面的吸附行为

探讨了亚油酸盐在４５钢电极界面的吸附行为．用充电曲线三点法和交流阻抗法测定体系的腐蚀电阻；用动电位扫描法测定极化曲线；用ＡＥＳ和ＸＰＳ对吸附层进行分析．结果表明。亚油酸在电极界面首先形成一单层化学吸附层；以胶团吸附形式存在于化学吸附层之上的物理吸附层对抑制点蚀起了重要作用．     

Total surface areas of Group IVA organometallic compounds: Predictors of toxicity to algae and bacteria

There is a high correlation between molecular surface area (TSA) of triorganotin and triorganolead compounds and their toxicity towards a bacterium (Escherichia coli) and an alga (Selenastrum capricornutum). Parallel attempts to correlate other Group IVA organometals incorporating silicon or germanium were unsuccessful. It was further demonstrated, however, that a high correlation was obtainable between certain series of compounds with the same organic substituent but different metal centers involving all Group IVA elements. In both instances, the inability to obtain a quantitative structure-activity relationship (QSAR) for all systems studied appears to be a function of the solubility of the compounds. While organotin TSA values have been found to correlate well with their toxicities toward various organisms, this study clearly suggests that this type of QSAR can be readily extended to include other organometal systems, provided that there is no solubility problem and the toxicity is a function of the hydrophobicity of the organometal compounds.     

Fabrication and Application of High Quality Diamond-coated Tools

Diamond-coated tools were fabricated using Co-cemented carbide inserts as substrates by the electronically aided hot filament chemical vapor deposition (EACVD). An amount of additive in an acid solution was used to promote the Co etching of the substrate surface. The surface of the WC-Co substrate was decarburized by microwave plasma with Ar-H 2 gas. Effect of the new substrate pretreatment on the adhesion of diamond films was investigated. A boron-doped solution was brushed on the tool surface to diffuse ...     

Superconvergence of discontinuous Galerkin finite element method for the stationary Navier‐Stokes equations

This article focuses on discontinuous Galerkin method for the two‐ or three‐dimensional stationary incompressible Navier‐Stokes equations. The velocity field is approximated by discontinuous locally solenoidal finite element, and the pressure is approximated by the standard conforming finite element. Then, superconvergence of nonconforming finite element approximations is applied by using least‐squares surface fitting for the stationary Navier‐Stokes equations. The method ameliorates the two noticeable disadvantages about the given finite element pair. Finally, the superconvergence result is provided under some regular assumptions. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 23: 421–436, 2007     

流线型挤出模曲面构造

根据塑料挤出的特点，在编程实现对型材截面轮廓凸凹性自动判断的基础上，采用射线法与比例间隔法相结合的方法，确定流道入口圆周上型值点的位置．以三次多项式作为流道模腔型曲线的数学模型，依据流线型要求给出的初始、边界条件，得出型曲线的数学方程．构建了挤出模流道的三维参数化曲面模型．有限元分析结果显示，该方法创建的流线型流道模型，其流动稳定性和平顺性都优于直线型流道．     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

ICP方法匹配深度图像的实现

针对ICP(迭代最近点 )方法中寻找深度像之间点对应关系这一难点问题 ,首先介绍对ICP方法匹配深度图像的原理并给出单位四元数和旋转角度间的关系 ,然后提出一种验证两个深度图像中对应点对有效性的方法 ,给出了判断待匹配深度图像之间的点对应条件的准则 ,同时给出了实现这种准则的数据结构以及程序设计思想 .最后 ,用真实深度图像证明此方法的有效性 ,并用“主次缝合线”法合成匹配后的深度图像     

GAL器件的编程和复制系统的研制

本文在原有破译仪的基础上,研制了GAL器件的编程系统,扩充了原系统的编程和复制功能,使用户能对任何GAL16V8或GAL20V8编程的GAL芯片进行破译、编程和复制,在用户自己的开发环境中设计所需的逻辑系统。