Chalcogeno-Morita-Baylis-Hillman Reaction of Chalcogenide-Enones with Carbonyl Compounds

Abstract

The Chalcogeno-Morita-Baylis-Hillman reaction was achieved by the reactions of 2-(methylchalcogeno)phenyl vinyl ketones with carbonyl compounds or acetals in the presence of BF₃· Et₂O. This reaction proceeds via the intramolecular Michael addition of the chalcogenide group to an enone moiety followed by the aldol reaction of the resulting chalcogenonio-enolate with an aldehyde. The reactions were worked up with triethylamine or saturated aqueous NaHCO₃ to give the α -methylene aldols (the Morita-Baylis-Hillman adducts).     

Effect of textural characteristics on the catalytic performance of supported KCoMoS2 in the synthesis of higher alcohols from syngas

The influence of textural characteristics on the catalytic performance of supported KCoMoS₂ catalysts was explored to provide essential information for the design of better catalysts for the synthesis of higher alcohols (C₁–C₅) from syngas. Syngas conversion was carried out over KCoMoS₂ catalysts supported on various mesoporous (alumina and carbon-coated alumina) and microporous (two types of powdered activated carbons) materials. The experimental results show that catalysts supported over microporous materials exhibit higher catalytic activity in HAS from syngas than catalysts based on mesoporous materials.     

碳酸钙固硫固体进样测汞仪快速测定硫化铅精矿中汞

在使用固体进样测汞仪直接测定硫化铅精矿中汞时,由于试样中硫含量通常较高(高达30%以上),在测定过程中大量的硫被氧化会污染甚至腐蚀固体进样测汞仪的核心部件催化管,导致催化管寿命严重缩短。为解决该问题,建立碳酸钙固硫-固体进样测汞仪直接测定硫化铅精矿中汞的分析方法;并对Ca/S比,分解温度,分解时间,齐化时间等参数进行优化。在最优条件下,Hg的含量在2~20 ng和20~500ng线性范围内回归系数(R²)分别为0.9996和0.9998;方法检出限(LOD)为0.006 μg/g。用该法对3个典型样品进行测定,相对标准偏差RSD≤9%(n=7),加标回收率为96%~106%。该方法简单、快捷,准确度和精密度高,适合硫化铅精矿中汞的快速测定。     

In Vivo Detection of Hydrogen Sulfide in Brain and Cell

Hydrogen sulfide (H₂S), is proposed as a cytoprotectant and gasotransmitter, involving in many physiological processes and regulating of some diseases. In addition, H₂S is a small molecular with a minimum of steric hindrance compared with other reactive sulfur species. In physiological atmosphere, H₂S is mainly existent in HS⁻, which has a strong nucleophilicity and reducing potency. It also can precipitate with some metal ions forming metallic sulfides with high precipitation coefficient. In recent years, the researchers have a desire to develop methods to achieve real-time detection of H₂S in vivo, further understanding the physiology and pathology of H₂S. In this minireview, we summarize recent progress for detecting of H₂S in brain or cell and briefly expound the principle of methods with the comparison of the different methods between performance and temporal resolution.     

One-pot,one-step,and selective terpolymerization of ethylene oxide,propylene oxide,and COS to copoly(thioether)s with tunable thermal properties

Facile construction of sulfur-rich polymers using readily available raw chemicals is an area aggressively pursued but challenging. Herein we use common feedstocks of ethylene oxide (EO), propylene oxide (PO), and carbonyl sulfide (COS) to synthesize copoly(thioether)s which are traditionally produced from unpleasant and difficult to store episulfides. In this protocol, the EO/COS coupling selectively generates a pure poly(ethylene sulfide) (PES) with melting temperature (T_m) values up to 172°C and high yields up to 98%. The EO/PO/COS terpolymerization leads to the incorporation of soft poly(propylene sulfide) (PPS) and hard PES segments together, affording a random PES-co-PPS copoly(thioether) with the complete consumption of EO and PO. Additionally, by simply varying the EO/PO feeding ratio, the obtained copoly(thioether)s possess tunable thermal properties, T_m values in the range of 76–144°C, and excellent solubility. These copolymerizations are conducted in one-pot/one-step at industrially favored reaction temperatures of 100–120°C using catalysts of common organic bases, suggesting a facile and practical manner. Especially, the copoly(thioether) exhibits high refractive indices up to 1.68 owing to its high sulfur content, suggesting a broad application prospect in optical materials.     

硫化钴装饰BiVO4光阳极提升其光电化学水分解性能

太阳能驱动的光电化学(PEC)水分解可以有效地将太阳能转化为化学能,作为解决环境排放和能源危机最具前景的途径之一,已经引起了科学界的广泛关注.PEC水分解系统由两个半反应组成:在光阳极上的析氧反应(OER)和光阴极上的析氢反应(HER).PEC系统的太阳能转化效率主要由光阳极/电解质界面的OER过程所决定,这是一个非常复杂且涉及质子偶联的多步四电子转移过程.钒酸铋(BiVO₄)是应用于PEC水分解的典型且具有实际应用前景的光阳极材料之一.然而,由于不良的表面电荷转移、电荷在光阳极/电解质结面处的表面复合以及缓慢的OER动力学等因素,导致BiVO₄的PEC性能受到严重限制.本文开发了一种新颖有效的解决方案,以低成本、高电导率和具有快速电荷转移能力的硫化钴装饰来提升BiVO₄光阳极的PEC活性,X射线多晶衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等表征,研究结果表明CoS成功装饰于BiVO₄表面.采用紫外-可见吸收光谱(UV-VisDRS)研究了BiVO₄和复合光阳极CoS/BiVO₄的光学性质,结果表明,与纯的BiVO₄相比,CoS/BiVO₄光阳极在可见光范围内光吸收能力有所增强.将制备的BiVO₄和CoS/BiVO₄光阳极应用于PEC分解水实验中,结果表明,相对于1.23 V可逆氢电极,在光照下,CoS/BiVO₄光阳极的光电流密度显著提升,可高达3.2 m Acm^-2,是纯BiVO₄的2.5倍以上.与纯BiVO₄相比,CoS/BiVO₄光阳极的起始氧化电位显示出负向偏移0.2 V,表明析氧过电势得到有效减小.入射光子转换效率(IPCE)测试结果表明,CoS/BiVO₄光阳极的入射光子转换效率在500 nm之前的可见光范围内得到明显提升,其中,CoS/BiVO₄的IPCE值在380 nm处达到最大.此外,由于CoS的装饰作用,CoS/BiVO₄光阳极的电荷注入效率和电荷分离效率均得到较大的提升,分别达到75.8%(相较于纯BiVO₄光阳极的36.7%)和79.8%(相较于纯BiVO₄光阳极的66.8%).电化学阻抗谱(EIS)测试结果表明,通过CoS的装饰,CoS/BiVO₄光阳极的界面电荷转移电阻得到有效降低,证明其界面电荷转移动力学得到有效提升.光致发光光谱测试结果表明,CoS的装饰显著提高了BiVO₄的光生电子-空穴对的分离效率,进一步证明BiVO₄表面的CoS装饰在其PEC分解水中起着非常积极的作用.本文为通过表面修饰设计应用于PEC水分解的有效的光阳极提供了新思路.     

CdS基纳米管光催化氧化5-羟甲基糠醛选择性生成2,5-呋喃二甲醛

将生物质转化为高附加值化学品以替代传统化石能源衍生的碳资源不可再生能源已经引起了人们的广泛关注. 本工作制备了内部中空的ZnS@CdS/Ni纳米管催化剂用于光催化氧化5-羟甲基糠醛(HMF). 通过X射线光电子能谱表征了催化剂内部存在ZnS缺陷态使得ZnS能带带隙降低. 光照条件下, 光生空穴能够从CdS迁移至ZnS缺陷态, 抑制了ZnS@CdS内部的载流子复合, 提高了光催化性能. 中空的纳米管表面负载Ni催化剂可以参与质子还原产氢的反应, 而ZnS@CdS内部产生的空穴可以催化氧化HMF选择性生成2,5-呋喃二甲醛(DFF). 光反应1 h后, HMF的转化率达到36%, 产物DFF选择性为99%, 并且催化剂可以重复利用三次而不降低催化效果.     

Determination of cerium in rare earth ores by fluorescence quenching of rhodamine 6G

A fluorescence quenching method has been developed to determine cerium with rhodamine 6G. The method is based on the oxidation of rhodamine 6G by cerium(IV) in sulfuric acid solution. The linear calibration range is 4.0 × 10^–7 -1.6 × 10^–6mol/L. The detection limit is 1.0 × 10^–7 mol/L. The relative standard deviation was 1.0% (n = 5). The method has been used to determine cerium in rare earth ores, with satisfactory results. The method offers the advantages of simplisity, sensitivity and selectivity.     

Thermal analysis study of the effect of molecular weight on constrained amorphous phase in poly(phenylene sulfide)

We report a thermal analysis study of the effect of molecular weight on the amorphous phase structure of poly(phenylene sulfide), PPS, crystallized at temperatures just above the glass transition temperature. Thermal properties of Fortron PPS, having viscosity average molecular weights of 30000 to 91000, were characterized using temperature modulated differential scanning calorimetry (MDSC). We find that while crystallinity varies little with molecular weight, the heat capacity increment at the glass transition decreases as molecular weight decreases. This leads to a smaller liquid-like amorphous phase, and a larger rigid amorphous fraction, in the lower molecular weight PPS. For all molecular weights, constrained fraction decreases as the scan rate decreases.This research is supported by the U. S. Army Research Office through contract DAAH04-96-1-0009. The authors thank Hoechst Celanese for providing different molecular weight Fortron samples and Dr. George Collins for providing sample information. The authors acknowledge the assistance of Elizabeth Oyebode and Leonardo Grimaldi with sample preparation and MDSC work.