Effect of textural characteristics on the catalytic performance of supported KCoMoS2 in the synthesis of higher alcohols from syngas

The influence of textural characteristics on the catalytic performance of supported KCoMoS₂ catalysts was explored to provide essential information for the design of better catalysts for the synthesis of higher alcohols (C₁–C₅) from syngas. Syngas conversion was carried out over KCoMoS₂ catalysts supported on various mesoporous (alumina and carbon-coated alumina) and microporous (two types of powdered activated carbons) materials. The experimental results show that catalysts supported over microporous materials exhibit higher catalytic activity in HAS from syngas than catalysts based on mesoporous materials.     

Green route for selective gram‐scale oxidation of sulfides using tungstate/triazine‐based ionic liquid immobilized on magnetic nanoparticles as a phase‐transfer heterogeneous catalyst

Tungstate ions were successfully loaded onto triazine‐based ionic liquid‐functionalized magnetic nanoparticles through an anion exchange process. The use of triazine core for creating ionic liquid led to the immobilization of high amounts of WO₄^2?. The resulting catalyst showed high activity and selectivity in the oxidation of sulfides to sulfoxides with H₂O₂ as a green oxidant at room temperature. In addition, due to the presence of ammonium groups in the catalyst structure, water dispersibility of the catalyst was increased. More important, the catalyst was magnetically recovered and reused for up to six runs without any marked decrease of activity and selectivity. Finally, easy gram‐scale oxidation of methylphenyl sulfide as well as fast separation of catalyst and product makes the protocol economical and industrially applicable.     

Chiral Bis(oxazoline)-copper Catalyzed Enantioselective Imidation of Sulfides

Prochiral sulfides reacted with Phl=NTs in the presence of a catalytic amount of Cu(I) salt together with a chiral 4,4′-disubstituted bis(oxazoline) ligand to afford the corresponding chiral sulfimides.     

Olefin Synthesis via,the Li-Derivative of N,N,N′,N′-Tetramethyldimides of Arylmethanephosphonic Acids

Abstract

The high erythro-stereoselective reaction of Li-tetramethyldiamides of arylmethanephosphonic acids with carbonyl compounds is used for synthesis of (Z)-alkenes by thermolysis of the erythro-adducts as well as in acidic media.     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

Membrane-based microchannel device for continuous quantitative extraction of dissolved free sulfide from water and from oil

Underground fluids are important natural sources of drinking water, geothermal energy, and oil-based fuels. To facilitate the surveying of such underground fluids, a novel microchannel extraction device was investigated for in-line continuous analysis and flow injection analysis of sulfide levels in water and in oil. Of the four designs investigated, the honeycomb-patterned microchannel extraction (HMCE) device was found to offer the most effective liquid–liquid extraction. In the HMCE device, a thin silicone membrane was sandwiched between two polydimethylsiloxane plates in which honeycomb-patterned microchannels had been fabricated. The identical patterns on the two plates were accurately aligned. The extracted sulfide was detected by quenching monitoring of fluorescein mercuric acetate (FMA). The sulfide extraction efficiencies from water and oil samples of the HMCE device and of three other designs (two annular and one rectangular channel) were examined theoretically and experimentally. The best performance was obtained with the HMCE device because of its thin sample layer (small diffusion distance) and large interface area. Quantitative extraction from both water and oil could be obtained using the HMCE device. The estimated limit of detection for continuous monitoring was 0.05 μM, and sulfide concentrations in the range of 0.15–10 μM could be determined when the acceptor was 5 μM FMA alkaline solution. The method was applied to natural water analysis using flow injection mode, and the data agreed with those obtained using headspace gas chromatography-flame photometric detection. The analysis of hydrogen sulfide levels in prepared oil samples was also performed. The proposed device is expected to be used for real time survey of oil wells and groundwater wells.     

A hidden rule in metal sulfide fullerenes: A case study of Sc2S@C88

To elucidate the structure of a compound is a necessary step for its practical applications. To study the structure and properties of metal sulfide fullerene Sc₂S@C₈₈ detected by mass spectrometry, 11 194 isomers of C₈₈ and 33 isomers of Sc₂S@C₈₈ were systematically examined by density functional theory calculations. The calculations show that the two lowest‐energy isomers are Sc₂S@C₈₈:81 738 (IPR‐35) and Sc₂S@C₈₈:81 735 (IPR‐32), followed by Sc₂S@C₈₈:81 729 (IPR‐26), Sc₂S@C_88:81 712 (IPR‐9), and Sc₂S@C_88:81 733 (IPR‐30). Structural analysis shows that the first two energetically favored isomers are bridged by the third and fifth energetically favored isomers, which can transfer into each other via direct Stone–Wales rotation. The calculations of temperature effect show that the first two favored isomers become dominant forms of Sc₂S@C₈₈ with decreasing temperature and may coexist in the soot. This structural convertibility among favored isomers of Sc₂S@C₈₈ suggest a hidden rule that birds of a feather flock together in metal sulfide fullerenes. This rule may decrease the range of candidate cages for the structural identification of a metal sulfide fullerene. IR spectra are simulated for helping the future experimental identification of Sc₂S@C₈₈.     

Cleaving Direct‐Laser‐Written Microstructures on Demand

Using an advanced functional photoresist we introduce direct‐laser‐written (DLW) 3D microstructures capable of complete degradation on demand. The networks consist exclusively of reversible bonds, formed by irradiation of a phenacyl sulfide linker, giving disulfide bonds in a radical‐free step‐growth polymerization via a reactive thioaldehyde. The bond formation was verified in solution by ESI‐MS. To induce cleavage, dithiothreitol causes a thiol–disulfide exchange, erasing the written structure. The mild cleavage of the disulfide network is highly orthogonal to other, for example, acrylate‐based DLW structures. To emphasize this aspect, DLW structures were prepared incorporating reversible structural elements into a non‐reversible acrylate‐based standard scaffold, confirming subsequent selective cleavage. The high lateral resolution achievable was verified by the preparation of well‐defined line gratings with line separations of down to 300 nm.     

Zinc sulfide nanosheets as a novel solid‐phase extraction material for flavonoids

As a novel solid‐phase extraction material, zinc sulfide nanosheets were prepared by a simple method and were used to extract flavonoids. We used scanning electron microscopy to show its nanosheet morphology and energy dispersive X‐ray spectroscopy and powder X‐ray diffraction to confirm its chemical and phase compositions. Coupled to a high‐performance liquid chromatography, the zinc sulfide nanosheets were packed into a microcolumn and were used to extract four model flavonoids to examine their extraction ability. The parameters of sample loading and elution were investigated. Under optimized conditions, the analytical method for flavonoids was established. For the method, wide linearities from 1 to 250 μg/L and low limits of detection from 0.25 to 0.5 μg/L were obtained. The relative standard deviations for single column repeatability and column to column reproducibility were less than 7.7 and 10.4%, respectively. The established method was also used to analyze two real samples and the recoveries from 88.7 to 98.2% further proved the reliability of the method. Moreover, the zinc sulfide nanosheets have good stability and that in one column can be reused for more than 50 times. This work proves that the prepared zinc sulfide nanosheets are a good candidate as the flavonoids sorbent.