Equation of convective diffusion of a multicomponent mixture in a capillary for an arbitrary velocity field

It is shown that the convective transport in a binary mixture in the presence of vortex convection can be described in terms of Fick’s law with an effective diffusion coefficient independent of the concentration. The form of the effective diffusion coefficient is found for arbitrary convection in the mixture. A generalization of the Stefan-Maxwell diffusion equation is proposed to include an arbitrary rotational mixture velocity field. The characteristics of convective transport are considered with reference to a three-component mixture. A solution of the equation of three-component mixture transport through a long capillary in the presence of convection homogeneous along the capillary axis is presented. It is established that for sharply different component diffusion coefficients a mixture density extremum may appear inside the capillary and then change or disappear depending on the convective flow intensity.     

离子束引起的在Al／Cr双层薄膜界面处的原子混合

用600keV的Kr~ 离子轰击Al/Cr双层薄膜样品进行界面原子反应及相互混合的研究。实验样品是在单晶硅上蒸镀约500nm厚的铝膜,相继再蒸上所需厚度的铬膜而制成的。轰击剂量为2.0×10~(15)-2.5×10~(16)Kr~ /cm~2。用2.0MeVa粒子对轰击前后的样品进行了卢瑟福背散射(RBS)分析,发现界面处有明显的原子混合存在;当轰击剂量≥1.0×10~(16)Kr~ /cm~2时,RBS谱出现有明显的坪台,经拟合计算和x射线衍射(XRD)测量证实确有化合物Al_(13)Cr_2存在;还分别得到了原子混合量及混合效率与轰击剂量的关系;最后对界面处的原子混合机制进行了讨论。     

激光开槽、埋槽电极硅太阳电池

报道一种新颖的激光开槽、埋槽电极硅太阳电池的结构、工艺流程及其研制结果。在ＡＭ１．５，２５℃，１００ｍＷ／ｃｍ２的条件下，以面积为４５ｃｍ３的３６片硅片研制的硅太阳电池的输出参数的平均值为ＪＳＣ＝３６．１ｍＡ／ｃｍ２，Ｖ∞＝６３３ｍＶ，Ｆ．Ｆ．＝０．７９８，η＝１８．２３％，最后分析了种高性能硅太阳电池的设计特点。     

PERSISTENCE AND GLOBAL STABILITY FOR TWO-SPECIES NONAUTONOMOUS PREDATOR-PREY SYSTEM WITH DIFFUSION AND TIME DELAY

In this paper, a non-autonomous predator-prey model with diffusion andcontinuous time delay is studied, where the prey can diffuse between two pat-ches of a heterogeneous environment with barriers between patches, but for thepredator, the diffusion does not involve a barrier between patches, further itis assumed that all the parameters are time-dependent. It is shown that thesystem can be made persistent under some appropriate conditions. Moreover,sufficient conditions that guarantee the existence of a unique periodic solutionwhich is globally asymptotic stable are derived.     

硫酸锰深度净化的研究

对用锰粉去除工业硫酸锰中杂质进行了探讨实验,结果表明:控制反应温度90℃,锰粉加入量1.9%,反应时间4 h,静置时间48 h后,工业二级硫酸锰可净化达到肥料级、饲料级硫酸锰产品标准。     

一个反应扩散方程的门槛结果

本文讨论反应扩散方程Ｃａｕｃｈｙ问题解的整体存在性，渐近性质和Ｂｌｏｗｕｐ问题．其中或者１＜ｑ＜ｐ＜＋∞，ｎ＝２．得到门槛结果．     

Domain size equilibration in sphere‐forming block copolymers

The kinetics of domain size equilibration were studied for asymmetric poly(ethylene‐alt‐propylene)‐b‐poly(dimethyl siloxane) (EPDMS) and polyisoprene‐b‐poly(dimethyl siloxane) (IDMS) block copolymers in the body‐centered cubic ordered phase. Small‐angle X‐ray scattering measurements of the principal peak position (q*) were made as a function of time after temperature jumps within the ordered state. The equilibration times were remarkably long, especially on cooling and for temperatures below 100 °C. For example, after a quench to 40 °C, q* for EPDMS had not fully equilibrated even after several weeks of annealing; IDMS required several days to equilibrate at the same temperature. In contrast, a lamella‐forming EPDMS sample was able to adjust q* within the timescale of the measurements (i.e., minutes) with both heating and cooling over the same temperature range. Measurements of tracer diffusion indicated that chain mobility was not the rate‐limiting step, although differences in mobility did account for the differences between EPDMS and IDMS. Rather, the limiting step was the required reduction in the number density of spheres on cooling; the disappearance of spheres, either by evaporation or by fusion, provided a large kinetic barrier. Lamellae, however, could adjust domain dimensions simply by local displacements of individual chains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 715–724, 2003     

Collisional Relaxation of Luminescence Anisotropy in Rarefied Gases in the Condensed Phase

The orientational relaxation of optically induced anisotropy in rarefied gases and at a damped rotation has been investigated. It has been found that the anisotropy relaxation in rarefied gases is described by a reduced kinetic equation depending only on free rotation integrals. The behavior of the integral anisotropy of luminescence for free symmetric and asymmetric top molecules has been elucidated. The law of luminescence depolarization has been obtained for asymmetric top molecules in the Gordon J-diffusion model. It represents the sum of two Stern–Volmer-type dependences, whose relative contribution is determined by the orientation of the dipole moments of transitions with absorption and emission of light in the molecular coordinate system and by the principal moments of inertia of the molecular top. It has been established that in the limit of a strongly damped rotation, kinetic equations of the general form reduce to equations of rotational diffusion. A number of modified diffusion equations correctly describing the contribution of inertial effects to the orientational relaxation of anisotropy have been obtained.     

Molecular modeling study on surface,thermal, mechanical and gas diffusion properties of chitosan

The motivation of this work is to provide reliable and accurate modeling studies of the physical (surface, thermal, mechanical and gas diffusion) properties of chitosan (CS) polymer. Our computational efforts have been devoted to make a comparison of the structural bulk properties of CS with similar type of polymers such as chitin and cellulose through cohesive energy density, solubility parameter, hydrogen bonding, and free volume distribution calculations. Atomistic modeling on CS polymer using molecular mechanics (MM) and molecular dynamics (MD) simulations has been carried out in three dimensionally periodic and effective two dimensionally periodic condensed phases. From the equilibrated structures, surface energies were computed. The equilibrium structure of the films shows an interior region of mass density close to the value in the bulk state. Various components of energetic interactions have been examined in detail to acquire a better insight into the interactions between bulk structure and the film surface. MD simulation (NPT ensemble) has also been used to obtain polymer specific volume as a function of temperature. It is demonstrated that these V–T curves can be used to locate the volumetric glass transition temperature (T_g) reliably. The mechanical properties of CS have been obtained using the strain deformation method. Diffusion coefficients of O₂, N₂, and CO₂ gas molecules at 300 K in CS have been estimated. The calculated properties of CS are comparable with the experimental values reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1260–1270, 2007