Structural Analogy Method in Studies of Adamantanes

The potential of the structural analogy method in the topological studies of adamantane derivatives and analogs is demonstrated. The topological and structural characteristics of these compounds are calculated. Chromatographic retention indices were determined experimentally. Correlations between the topological indices and the physicochemical and chromatographic characteristics are investigated.     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

1, 5-Rearrangement of enol acylates of aryl 1H.-1, 2, 4-triazol-1-ylmethyl ketones

The rearrangement of enol acylates of aryl 1H-1, 2, 4-triazol-1-ylmethyl ketones at 140–150°C in acetic anhydride is studied. The migration of the acyl group to the C(5) atom of the heterocycle is found to be intramolecular. The characteristics of the original and final products are presented. X-ray structural studies of the enol acetates of 2, 4-dichlorophenyl 1H-1, 2, 4-triazol-1-ylmethyl ketone and 2, 4-dichlorophenyl 5-acetyl-1H-1, 2, 4-triazol-1-ylmethyl ketone are carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 560–564, March, 1993.     

Qualitative estimation of the dependence of the number of energetic compounds on their oxygen coefficient

The ratio between the numbers of structural formulas of C,H,N,O-containing energetic compounds belonging to the classes of fuels (low values of the oxygen coefficientA), explosives (mediumA), and oxidants (highA values) was studied by a computer generation procedure. The number of the theoretically possible structural formulas was found to decrease rapidly on going from fuels to explosives and then to oxidants; this observation agrees with the data on the numbers of various energetic compounds currently used and proposed. The strategy of the search for new compounds with the specified properties is described in brief, and its applicability to the search for explosives and oxidants with a small (up to 12) number of atoms in a molecule is evaluated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1304–1310, July, 1998.     

Effect of Oxygen Redistribution on the Normal and Superconducting Properties of Yttrium High‐Temperature Superconductors

An anomaly is found in the vicinity of T_max 560$ K on electric resistance versus temperature curves for yttrium hightemperature superconductors of the 123 phase. Xray phase analysis suggests a structural phase transition in the vicinity of T_max due to oxygen redistribution in the mobile sublattice of this compound. Investigation of samples with Y partially replaced by Ca has shown that the structural phase transition does not depend on carrier concentration in the conduction band.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Molecular structure of potassium [N,N′-bis(salicylideneamino)nitroguanidonate-N,N′,-O,O′]nickel(ii), the product of condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni2+ ion template

The crystal structure of the product of the condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni²⁺ ion template, K[Ni(C₁₅H₁₀N₅O₄)] · DMF, has been studied. It was established that a planar Ni complex, consisting of isolated [NiL]^– anions and solvated [K⁺ · DMF] cations, is formed. The negative charge of the anion is localized mainly on the O atoms of the nitro group. The nitroguanidine fragment of the ligand occurs in the tautomeric form, which was not reported previously.Deceased in 1995Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2273–2277, September, 1996.     

Analysis of the Micropore Structure of Various Microporous Materials from Nitrogen Adsorption at 77 K

The micropore structure of four microporous materials (two zeolites, ZSM-5 and Y-82; an activated carbon and an alumina pillared clay) and their binary physical mixtures (50-50 wt%) have been examined by nitrogen adsorption at 77 K. Various micropore sizes have been considered from the stages on the micropore filling mechanism in the microporous materials. The application of the Dubinin-Astakhov (DA) equation to characterize and obtain the adsorption potential distributions of the microporous materials is presented.     

Synthesis and structure of 6-chloro-2,3-trimethylene-4-phenylquinoline

An X-ray structural investigation of 6-chloro- 2,3-trimethylene-4- phe nylquinoli ne obtained by the reaction of 2-amino-5-chlorobenzophenone with cyclopentanone was carried out. At 20 °C, a = 23.750,b = 9,242, c = 14.018 A, = 112,68° space group (21c,Z = 8, 2647 reflections,R = 0.047 He five-membered ring has an envelope conformation Conjugation between the quinohne fragment and the phenyl substituent is significantly distorted dm to the rotation of the latter by -62.9°Translated fromIzvestiya Akademii Nauk. Seriva Khimicheskaya, No. 7, pp. 1800–1802, July, 1996.     

Crystal Structures and Magnetic Studies of Naphthalene Derivatives Containing Nitronly Nitroxides

Crystal structures of new nitronyl nitroxide derivatives 1, 2 and 3 were determined with X‐ray diffraction analysis: 1, monoclinic, C₂/c, a = 1.2404(5) nm, b = 0.9730(5) um, c = 2.7049(10) ran, β = 98.189(15)°, V = 3.2315(24) nm³, Z = 8; 2, or‐thorhombic, Pbca, a = 0.61262(2) nm, b = 1.11426(6) nm, c = 2.30543(13) nm, V = 1.57373(13) nm³, Z = 4; 3, monoclinic, P2(1)/n, a=0.64253(4) nm, b=2.55003(17) nm, c = 1.15497(6) nm, β = 95.000(3)°, V = 1.8852(2) nm³, Z = 4. Their magnetic properties were measured with SQUID and analyzed based on their crystal structures with simple singlet‐triplet, modified one dimensional antiferromagnetic chain and modified singlet‐triplet models respectively: 1, J/k_b= ?2.5 K; 2, J/k_b = 7.8 K, θ = 2.8 K; 3, J/k_b = ?0.96 K, θ = 0.21 K.