Qualitative estimation of the dependence of the number of energetic compounds on their oxygen coefficient

The ratio between the numbers of structural formulas of C,H,N,O-containing energetic compounds belonging to the classes of fuels (low values of the oxygen coefficientA), explosives (mediumA), and oxidants (highA values) was studied by a computer generation procedure. The number of the theoretically possible structural formulas was found to decrease rapidly on going from fuels to explosives and then to oxidants; this observation agrees with the data on the numbers of various energetic compounds currently used and proposed. The strategy of the search for new compounds with the specified properties is described in brief, and its applicability to the search for explosives and oxidants with a small (up to 12) number of atoms in a molecule is evaluated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1304–1310, July, 1998.     

Effect of Oxygen Redistribution on the Normal and Superconducting Properties of Yttrium High‐Temperature Superconductors

An anomaly is found in the vicinity of T_max 560$ K on electric resistance versus temperature curves for yttrium hightemperature superconductors of the 123 phase. Xray phase analysis suggests a structural phase transition in the vicinity of T_max due to oxygen redistribution in the mobile sublattice of this compound. Investigation of samples with Y partially replaced by Ca has shown that the structural phase transition does not depend on carrier concentration in the conduction band.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Molecular structure of potassium [N,N′-bis(salicylideneamino)nitroguanidonate-N,N′,-O,O′]nickel(ii), the product of condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni2+ ion template

The crystal structure of the product of the condensation of (salicylideneamino)nitroguanidine with salicylaldehyde on a Ni²⁺ ion template, K[Ni(C₁₅H₁₀N₅O₄)] · DMF, has been studied. It was established that a planar Ni complex, consisting of isolated [NiL]^– anions and solvated [K⁺ · DMF] cations, is formed. The negative charge of the anion is localized mainly on the O atoms of the nitro group. The nitroguanidine fragment of the ligand occurs in the tautomeric form, which was not reported previously.Deceased in 1995Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2273–2277, September, 1996.     

Analysis of the Micropore Structure of Various Microporous Materials from Nitrogen Adsorption at 77 K

The micropore structure of four microporous materials (two zeolites, ZSM-5 and Y-82; an activated carbon and an alumina pillared clay) and their binary physical mixtures (50-50 wt%) have been examined by nitrogen adsorption at 77 K. Various micropore sizes have been considered from the stages on the micropore filling mechanism in the microporous materials. The application of the Dubinin-Astakhov (DA) equation to characterize and obtain the adsorption potential distributions of the microporous materials is presented.     

Synthesis and structure of 6-chloro-2,3-trimethylene-4-phenylquinoline

An X-ray structural investigation of 6-chloro- 2,3-trimethylene-4- phe nylquinoli ne obtained by the reaction of 2-amino-5-chlorobenzophenone with cyclopentanone was carried out. At 20 °C, a = 23.750,b = 9,242, c = 14.018 A, = 112,68° space group (21c,Z = 8, 2647 reflections,R = 0.047 He five-membered ring has an envelope conformation Conjugation between the quinohne fragment and the phenyl substituent is significantly distorted dm to the rotation of the latter by -62.9°Translated fromIzvestiya Akademii Nauk. Seriva Khimicheskaya, No. 7, pp. 1800–1802, July, 1996.     

Crystal Structures and Magnetic Studies of Naphthalene Derivatives Containing Nitronly Nitroxides

Crystal structures of new nitronyl nitroxide derivatives 1, 2 and 3 were determined with X‐ray diffraction analysis: 1, monoclinic, C₂/c, a = 1.2404(5) nm, b = 0.9730(5) um, c = 2.7049(10) ran, β = 98.189(15)°, V = 3.2315(24) nm³, Z = 8; 2, or‐thorhombic, Pbca, a = 0.61262(2) nm, b = 1.11426(6) nm, c = 2.30543(13) nm, V = 1.57373(13) nm³, Z = 4; 3, monoclinic, P2(1)/n, a=0.64253(4) nm, b=2.55003(17) nm, c = 1.15497(6) nm, β = 95.000(3)°, V = 1.8852(2) nm³, Z = 4. Their magnetic properties were measured with SQUID and analyzed based on their crystal structures with simple singlet‐triplet, modified one dimensional antiferromagnetic chain and modified singlet‐triplet models respectively: 1, J/k_b= ?2.5 K; 2, J/k_b = 7.8 K, θ = 2.8 K; 3, J/k_b = ?0.96 K, θ = 0.21 K.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

Modification of Surface and Structural Properties of Ordered Mesoporous Silicates

Two simple modification methods for ordered mesoporous silicas were examined and compared. MCM-41 molecular sieve was physically coated with 4-cyano-4-biphenyl [4(4-pentenyloxy)]benzoate (CBPB) and chemically modified using trimethylethoxysilane. The structural and surface properties of the obtained materials were characterized using elemental analysis, thermogravimetry and nitrogen adsorption over a wide pressure range.It was shown that the pore size of the MCM-41 material was not decreased significantly after the coating procedure, even for high loadings of CBPB. Moreover, low pressure adsorption measurements indicated that significant fractions of the MCM-41 surface were not covered by CBPB, even for high CBPB loadings, which suggests that the attained coverage may be very nonuniform. The chemical bonding procedure led to a marked decrease in the pore size and change of surface properties.It was demonstrated that nitrogen adsorption measurements provide a means of a thorough characterization of modified MCM-41 materials, allowing to estimate the surface area, pore volume and pore size distribution. Moreover, low pressure adsorption data can be used to qualitatively or semiquantitatively assess the surface coverage of the coated/bonded organic groups, which may be used to estimate the uniformity of the coverage and therefore, the usefulness of the modification procedure.     

Pattern of separatrices and intrinsic reaction coordinates for degenerate thermal rearrangements

A structurally stable model of the standard adiabatic gradient field of the potential energy surface for certain pericyclic reactions is derived.These reactions are not subjected to the principles of orbital isomerism or to the Woodward-Hoffmann rules.Use is made of a principle established by Ariel Fernández and Oktay Sinanolu which precludes direct meta-IRC connections between transition states.It is shown that Jahn-Teller isomers of the singlet biradicals involved in the process are not interconvertible since the biradical configuration is not a transition state but a critical point with Hessian matrix with two negative eigenvalues.The topological features of the PES obtained by combinatorial methods are in full agreement with earlier results obtained from MINDO calculations.