高等师范学生教师职业技能训练及培养模式新论

高等师范学生的教师职业技能训练,自国家1995年《教师资格条例》颁布以来,虽在全国有关高校一度出现好的势头,但很快被我国高校扩招的形势冲淡了,目前情况令人担忧。因此,在我国高等教育发展的新形势下,从宏观上构建高等师范学生教师职业技能培养模式应是当务之急。     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Linearized and rational approximation method for solving non‐linear Burgers' equation

A new numerical method called linearized and rational approximation method is presented to solve non‐linear evolution equations. The utility of the method is demonstrated for the case of differentiation of functions involving steep gradients. The solution of Burgers' equation is presented to illustrate the effectiveness of the technique for the solution of non‐linear evolution equations exhibiting nearly discontinuous solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

Inviscid,laminar and turbulent opposed flows

This paper attempts to reproduce numerically previous experimental findings with opposed flows and extends their range to quantify the effects of upstream pipes and nozzles with inviscid, laminar and turbulent flows. The choice of conservation equations, boundary conditions, algorithms for their solution, the degree of grid dependence, numerical diffusion and the validity of numerical approximations are justified with supporting calculations where necessary. The results of all calculations on the stagnation plane show maximum strain rates close to the annular exit from the nozzles and pipes for lower separations and it can be expected that corresponding reacting flows will tend to extinguish in this region with the extinction moving towards the axis. With laminar flows, the maximum strain rate increased with Reynolds number and the maximum values were generally greater than with inviscid flows and smaller than with turbulent flows. With large separations, the strain rates varied less and this explains some results with reacting flows where the extinction appeared to begin on the axis. The turbulent‐flow calculations allowed comparison of three common variants of a two‐equation first‐moment closure. They provided reasonable and useful indications of strain rates but none correctly represented the rms of velocity fluctuations on the axis and close to the stagnation plane. As expected, those designed to deal with this problem produced results in better agreement with experiment but were still imperfect. Copyright © 2004 John Wiley & Sons, Ltd.     

A posteriori H1 error estimation for a singularly perturbed reaction diffusion problem on anisotropic meshes

The paper deals with a singularly perturbed reaction diffusionmodel problem. The focus is on reliable a posteriori error estimatorsfor the H¹ seminorm that can be applied to anisotropic finiteelement meshes. A residual error estimator and a local problemerror estimator are proposed and rigorously analysed. They arelocally equivalent, and both bound the error reliably. Threemodifications of these estimators are introduced and discussed. Much attention is given to the performance of the error estimatorin numerical experiments. This helps to identify those estimatorsthat are suitable for practical applications.     

Isospectral theory of Euler equations

Isospectral problem of both 2D and 3D Euler equations of inviscid fluids, is investigated. Connections with the Clay problem are described. Spectral theorem of the Lax pair is studied.     

The solution of the neutron transport equation in a slab with anisotropic scattering

The neutron transport equation for a slab geometry with the extremely anisotropic scattering kernel is considered. The albedo and transmission factors are calculated using the variation method. The effect of the extremely anisotropic parameter on the variation of the slab albedo and transmission factor is calculated. The obtained results are compared with the published data.     

AGS能量下π~－π~－的Bose—Einstein关联

全同粒子间的玻色－爱因斯坦关联可以用来研究相对论性核碰撞中次级粒子源分布及有关的物理问题．本文用强子级联模型（ＨＣＭ）模拟２８Ｓｉ（１４．６ＡＧＣＶ／ｃ）＋Ａｕ反应，得到π－粒子的ｆｒｅｅｚｅ－ｏｕｔ状态，进而计算了π－π－关联函数，取得与实验一致的结果．还计算了ｆｒｅｅｚｅ—ｏｕｔπ－源的均方根线度，并讨论了它与拟合方法抽取的源参数间的关系．     

砼强度准则在井壁结构中的应用研究

本文根据井壁结构模型试验结果,对目前具有代表性的复杂应力状态下的砼强度准则进行了分析和对比,找到了一种比较适合于井壁结构的砼强度准则,从而为井壁结构承载能力的合理计算提供了理论基础.