Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.     

山东潍坊某办公大楼整体平移技术

采用钢筋混凝土包柱夹墙式托换结构和高性能工程塑料滚轴，对某办公大楼整体平移，监测结果表明，房屋平移6m后整体性提高。平移的成功以及由此取得的明显经济与社会效益，表明本工程设计方案与施工技术先进合理，可为类似整体平移工程提供参考。     

Temperature effect on deposition rate of silicon nitride films

Temperature effects on deposition rate of silicon nitride films were characterized by building a neural network prediction model. The silicon nitride films were deposited by using a plasma enhanced chemical vapor deposition system and process parameter effects were systematically characterized by 2⁶⁻¹ fractional factorial experiment. The process parameters involved include a radio frequency power, pressure, temperature, SiH₄, N₂, and NH₃ flow rates. The prediction performance of generalized regression neural network was drastically improved by optimizing multi-valued training factors using a genetic algorithm. Several 3D plots were generated to investigate parameter effects at various temperatures. Predicted variations were experimentally validated. The temperature effect on the deposition rate was a complex function of parameters but N₂ flow rate. Larger decreases in the deposition rate with the temperature were only noticed at lower SiH₄ (or higher NH₃) flow rates. Typical effects of SiH₄ or NH₃ flow rate were only observed at higher or lower temperatures. A comparison with the refractive index model facilitated a selective choice of either SiH₄ or NH₃ for process optimization.     

一类二元相关威布尔分布的可靠性问题

本文考虑生存函数为${\ol{F}(x_{1},x_{2})}=\exp\{-[(x_{1}^{1/\alpha}/\theta_{1})^{1/\delta}+(x_{2}^{1/\alpha}/\theta_{2})^{1/\delta}]^{\delta}\},\;x_{i}>0,\;\alpha>0$, $1\geq\delta>0,\;\theta_{i}>0\;(i=1,2)$的二元威布尔分布的两种可靠性问题, 提出可靠度$\pr$的估计并讨论了它们的渐近性, 最后还作了模拟计算.     

液压传动实验教学的新模式

在液压传动实验教学改革的研究与实践中,针对传统的液压传动实验教学中演示性实验的不足,构建了培养设计力和创新能力为目标的液压传动实验教学新模式,并用实例说明实验实施的方案。     

远程学习材料中的活动设计

本文对远程学习材料中活动设计的重要性、类型和形式、结构、数量安排、与学习者之间的关系等内容进行了全面的介绍，指出良好的活动设计是远程学习材料开发的关键要素，只有符合远程学习特征的学习材料才能真正适合远程学习者的需要，才能保证远程教育的质量。     

激光准直仪的设计性物理实验

介绍了激光准直仪的结构、工作原理及其在设计性物理实验中的应用     

Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

Identifying Linking-Pin Organizations in Inter-Organizational Networks

Within the large literature on inter-organizational networks, there has been some discussion of linking-pin organizations and the role they play in integrating these networks. Based on this verbal specification of linking-pin organizations, we construct operational criteria and empirical methods for identifying these structurally important organizations in potentially large and complex inter-organizational networks. These methods are based on ideas drawn from blockmodeling, structural holes, centrality and centralization of networks, and identifying cut-points in networks. These methods are applied to a constructed example and then to real empirical inter-organizational networks. Implications and contrasts with other methods are discussed, together with some open problems.