直线电机瞬态特性的场路耦合分析法

运用磁网络法,进行了单边直线感应电动机的性能分析。提出了此种电机的磁网络模型,由电磁场方程导出了磁网络的参数,从而考虑了直线电机边端效应、绕组不对称分布等结构特点。场路耦合及机电耦合法的运用,使文中提供的分析模型更接近实际情况,适合于动态特性的分析     

Electrochemical behaviour of an indium electrode in concentrated KOH solutions at different temperatures

Summary The electrochemical behaviour of pure indium in KOH solutions (1–4M) was studied at different temperatures (25–70°C) by potentiostatic techniques. Two anodic peaks corresponding to the formation of In(OH)₃ and In₂O₃ were observed. The heights of the two peaks increased with the increase of alkali concentration. An increase of temperature increased the peak currents and shifted their corresponding potentials to more negative values. The variation of the peak currents and peak potentials with scan rate suggested that the anodic dissolution of indium was a diffusion controlled process. In cyclic voltammetry, the reverse scan consistently showed one peak which was attributed to the reduction of anodic oxidation products into indium. X-ray diffraction analysis confirmed the presence of In(OH)₃ at the first anodic peak, In(OH)₃ and In₂O₃ at the second anodic peak and In₂O₃ in the permanent passive region.

---

Zum elektrochemischen Verhalten einer Indium-Elektrode in konzentrierter Kalilauge bei verschiedenen Temperaturen

Zusammenfassung Es wurde das Verhalten von reinem Indium in 1 – 4M KOH-Lösungen bei Temperaturen zwischen 25 und 70°C mittels potentiostatischer Methoden untersucht. Zwei anodische Peaks, entsprechend der Bildung von In(OH)₃ und In₂O₃, traten auf. Die Höhe der beiden Peaks wurde mit zunehmender Alkalikonzentration gesteigert. Eine Temperaturerhöhung verstärkte die Peakströme und verschob die entsprechenden Potentiale zu negativeren Werten. Die Abhängigkeit der Peakströme und Peakpotentiale von der Scangeschwindigkeit legte den Schluß nahe, daß die anodische Lösung von Indium in einem diffusionskontrollierten Prozeß stattfindet. Bei der cyclischen Voltammetrie zeigte der reverse Scan einheitlich einen Peak, der der Reduktion der anodischen Oxidationsprodukte zu Indium zugeschrieben wurde. Röntgendiffraktionsanalyse bestätigte die Präsenz von In(OH)₃ beim ersten anodischen Peak, In(OH)₃ beim zweiten Peak und In₂O₃ im permanent passiven Bereich.

     

Spin-transition behaviour of transition metal complexes with 2,6-bis-(benzimidazol-2′-yl)-pyridine induced by deprotonation of the complex

Summary 2,6-bis-(Benzimidazol-2-yl)-pyridine (bzimpy = H₂ L) acts as a bidentate ligand when combining with transition metal ions. The complexes [M(bzimpy)₂](ClO₄)₂ (M = Fe²⁺, Mn²⁺, Zn²⁺, Co²⁺, and Ni²⁺) were obtained as solids. The protonation constants (logK) for the ligand and the complexes were evaluated in 30:70 (v/v) H₂O:EtOH at 293 K and at constant ionic strength of 0.12M KCl. Coordination of the ligand to the metal ions leads to an increase of acidity of the imino-hydrogen of the benzimidazole group of the ligand as a function of the complex stability. Deprotonation leads to a spin-state transition (intermediate spin-state low-spin) of the iron(II)-complex, followed by a shift of the metal-to-ligandcharge transfer band (MLCT) to lower energies (_max=563 to 580 nm). The d-d absorption bands are found to shift to higher energies and the low-spin isomer is favoured at room temperature. An opposite shift of theMLCT band (_max=563 to 557 nm) is observed when HClO₄ is added to the complex solution, rendering the high-spin state of the complex more favourable.On leave from the Chemistry Department, Jahangirnagar University, Dhaka, Bangladesh     

Synthesis, characterisation and thermal behaviour of solid state compounds of 4-methylbenzylidenepyruvate with some bivalent metal ions

Solid state M-4-Me-BP compounds, where M stands for bivalent Mn, Fe, Co, Ni, Cu, Zn, Pb and 4-Me-BP is 4-methylbenzylidenepyruvate, have been synthesized. Simultaneous thermogravimetry-differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy, elemental analysis, and complexometry were used to characterise and to study the thermal behaviour of these compounds. The results led to information about the composition, dehydration, thermal stability and thermal decomposition of the isolated complexes.     

非水层状液晶的稳定性与相行为

水体系层状液晶已研究较久,非水层状液晶则是近十年来才得到发展。本文以层状液晶的相行为和~2H NMR测量,研究并比较了非水层状液晶十二烷基硫酸钠/正癸醇溶剂以甘油或甲酰胺为溶剂时体系的结构与稳定性。 表面活性剂十二烷基硫酸钠(BDH,简写SDS)经无水乙醇重结晶两次提纯。用铂环法测     

新型大位阻取代茂钛,锆化合物的合成及其谱学性质

通过１－环庚烯基锂与６，６－二烷基富烯发生环外双键的加成反应形成的大取代茂锂试剂与ＭＣｌ４（Ｍ＝Ｔｉ，Ｚｒ）反应，合成了１２个含或不含手性碳的大位阻取代茂金属有机化合物，并研究了它们的１ＨＮＭＲ，ＥＩＭＳ和ＩＲ．     

Voltamperometric determination of kinetin with a carbon paste modified electrode

The electrochemical behaviour of kinetin (6-furfurylaminopurine) on a carbon paste modified with OV-17 silicone electrode, is studied. The determination of kinetin is possible working in square wave voltammetric techniques, reaching limits of determination of 38.7 ng ml⁻¹. The proposed method was successfully applied to determine the cytokinin in extracts of apples (previously spiked with kinetin) and the obtained results were in accordance with the results obtained with HPLC-UV.     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

Thermal characteristics of polyurethane foams incorporated with phase change materials

Thermal energy storage plays an important role in heat management because of the demand for developed energy conservation, and has applications in diverse areas, from building heating/cooling systems which enable solar energy incorporation into the structure, to textiles and clothings providing an enhanced thermal comfort. In this study, we aimed to improve thermal characteristics of polyurethane rigid foams that have been widely used for thermal insulation as the ultimate energy savers due to their ability to form sandwich structures with various facer materials. Through a laboratory-scale work, two paraffin waxes acting as phase change materials, namely n-hexadecane and n-octadecane, each of which is capable of managing large heat storage/release, were directly incorporated into the polyurethane foams at different ratios. Polymerization modified by means of n-alkane addition could be achieved without any adverse effect. In order to determine both structural and thermal characteristics, seven types of foams produced were examined by FT-IR, SEM, DSC analyses, calorimeter bomb and mechanical tests. Results show that polyurethane foams can be designed as thermal insulators equipped with an improved buffering function against temperature changes.