四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

离子交换树脂纯化酪蛋白磷酸肽研究

通过单因素实验和正交试验确定了使用D-201型大孔强碱性阴离子交换树脂纯化酪蛋白磷酸肽(CPPs)的操作条件为：洗脱温度40℃、洗脱酸(HCI)浓度0．2mol／L、洗脱速度2．3ml／min、进样浓度2％(w／v)，进一步应用HPSEC技术分析考察了离子交换树脂纯化后含磷洗脱峰分子量分布情况，并计算了产品氮磷比与纯化收率．     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

超高交联吸附树脂吸附对硝基苯乙酮的热力学研究

比较两种超高交联聚苯乙烯吸附树脂NJ-8、AM-1与Amberlite XAD-4(以下简称XAD-4)对对硝基苯乙酮的静态吸附行为，根据吸附等温线研究了吸附热力学性质．在298～318K和研究的浓度范围内，NJ-8，AM-1、XAD-4对对硝基苯乙酮的吸附平衡数据符合Freundlich吸附等温方程．结果表明：吸附为放热过程，适当降低温度有利于吸附．计算了对硝基苯乙酮在NJ-8，AM-1、XAD-4树脂上的吸附焓变、自由能变，吸附熵变．对吸附行为作了合理的解释。     

上海市集成电路及机电一体化产品的比较优势研究

本文用一种“节汇成本比较”的方法,对上海市集成电路及机电一体化产品的比较优势进行调查研究,提出了上海市在这两个产品领域发展重点的建议。     

Sea water intrusion and salt water intrusion in the coastal area of Laizhou Bay

The characteristics, pattern, hydrodynamic and hydrochemical features, and the movement pattern of the salt waterfresh water interface of the sea water intrusion and the salt water intrusion, which occur in the coastal area of Laizhou Bay in Shandong Province, are analysed. The characteristics of the two kinds of intrusion are compared as well. A three-dimensional sea water intrusion model to describe the sea water intrusion with a transitional zone 1.5–6.0 km wide in the phreatic aquifer and a solute transport model describing the behavior of cations exchange in the process of sea water intrusion are established.     

酚醛树脂泡沫材料的填充改性及其性能研究

用氢氧化铝粉末对泡沫酚醛树脂材料进行填充改性,并对其主要性能进行研究．结果表明,填充改性能提高酚醛泡沫材料的抗压强度,其导热系数随温度和密度的升高而增大,泡沫材料在深冷情况下表现出优异的绝热性能．同时对酚醛泡沫材料的燃烧性能进行了考察,其临界氧指数高达４７,在高于１５０℃环境温度中有自燃的危险,１５０℃以下可安全使用．     

程控交换机呼叫接续功能测试系统的设计

介绍笔者为测试交换机呼叫接续功能而开发的,供大型交换机生产线使用的一套专用测试系统的软硬件设计方法。并给出硬件结构和测试软件流程图。     

粘胶基碳布电化学氧化表面处理的研究

本文用电化学氧化方法对粘胶基碳布进行表面处理。采用电位滴定法分析测定了氧化处理前后碳纤维表面酸性官能团含量的变化,用水滴铺展方法分析了处理前后碳布润湿性能的变化情况,探讨了酸性官能团含量、织物强力与复合材料层间剪切强度的关系,找出了以Ｈ３ＰＯ４为电解质的最佳电化学氧化表面处理工艺。