Recognition of ring pairs in the data analysis of Cherenkov detectors

We present a new algorithm for the identification of ring pairs in Cherenkov detectors. The approach combines linear regression methods for the construction of an appropriate reference quantity, methods from statistics for the evaluation of hypotheses and Monte Carlo simulation runs for the tuning of threshold levels.     

对煤矿岩体中固流耦合效应问题研究的探讨

本文对固流耦合效应的基本概念、基本原理进行了简单介绍。并对采动影响下邻近煤层、岩层的瓦斯向本层采空区的流动规律,以及煤和瓦斯突出的机理和发生的理论,分别作为固流耦合效应的两类不同问题进行了研究.同时提出了今后进行进一步研究的看法。     

圆形隧洞周边位移和地层压力预报的简便公式

应用本文所提出的公式可计算地层的初始应力和由开挖引起的洞周位移。预报公式所需要的计算数据是一组相邻测点之间的量测位移,这可通过隧洞的施工监控量测而得到。在推导这些预报公式时,著者先应用一系列的有限元和无限元等数值计算方法来模拟洞室的开挖,从而得到大量的“观测数据”。然后综合应用自动回归和解析方法,建立了实用的计算公式。这些公式使用简便且具有良好的精度。     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

Use of participant EQA results to assess sample homogeneity and stability for qualitative analytes

International requirements for PT and EQA state that providers must demonstrate that samples are homogeneous and stable. However, testing for homogeneity and stability can be expensive, use samples that could otherwise serve as quality-control materials, and can also fail to detect significant inhomogeneity and instability. In some situations it may be preferable to use the results from participants to identify problems with sample lots, if historic results follow predictable distributions and a statistical decision rule can be produced. An unusually high proportion of incorrect results may indicate that samples were inhomogeneous or unstable. Conditions under which this can be demonstrated are discussed, and the efficacy of the proposal is demonstrated with two examples. This procedure is especially effective when there are a large number of participants and/or a historic small proportion of incorrect results. Providers who adopt this proposal will need to retain samples for testing and assume the risk of distributing bad samples.Presented at the Eurachem PT Workshop September 2005, Portorož, Slovenia     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

Residual stress and deformation during rapid cooling process in an epoxy plate

Residual stress in the epoxy plate during a rapid cooling process was measured by the layer removal method and calculated by the linear thermoviscoelastic theory considering specific volume relaxation. The relaxations of the tensile modulus and specific volume were measured by an Instron thermomechanical analyzer. When the starting temperature of the cooling process was near the glass transition temperature of the cured epoxy, the residual stress in the epoxy plate was smaller than when the starting temperature was higher than the glass transition temperature. However, the transient stress in the cured epoxy plate was higher when the starting temperature was near the glass transition temperature than when the starting temperature was higher than the glass transition temperature. The quenched epoxy plate was compressed in the direction parallel to the surface and expanded in the thickness direction.     

仪器分析测试技术信息化教学探索与实践

针对高职学生的特点，以仪器分析测试技术课程实训教学为例，按照课前布置学习任务，学生翻转课堂学习，"教、学、做"一体化课堂教学，课后复习巩固的形式，开展信息化教学的探索与实践，并对信息化教学的效果和存在的问题进行了分析。通过信息化教学改革，仪器分析测试技术课程突破了传统教学时空的限制，激发了学生学习的兴趣，构建了"学生主体、教师主导"的教学新模式，提高了课堂教学效果，对推动高职课堂信息化教学的改革具有一定的借鉴意义。     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Comparability of analytical results obtained in proficiency testing based on a metrological approach

A “yes–no” type of criterion is proposed for the assessment of comparability of proficiency testing (PT) results when the PT scheme is based on a metrological approach, i.e. on the use of a reference material as the test sample, etc. The criterion tests a null hypothesis concerning the insignificance of a bias of the mean of the results from a traceable value certified in the reference material used for the PT. Reliability of such assessment is determined by the probabilities of not rejecting the null hypothesis when it is true, and rejecting it when it is false (the alternative hypothesis is true). It is shown that a number of chemical, metrological and statistical reasons should be taken into account for careful formulation of the hypotheses, enabling the avoidance of an erroneous assessment of the comparability. The criterion can be helpful for PT providers and laboratory accreditation bodies in analysis of PT results.