氯化1-乙基-3-甲基烷基咪唑分子结构及其氢键作用能的密度泛函研究

采用量子化学密度范函方法计算研究了氯化1-乙基-3-甲基咪唑盐（[EMIM]C1）正负离子间相互作用的平衡构型和Cl^-离子从不同方位与咪唑阳离子的结合能．计算发现Cl^-可在咪唑环平面上结合形成离子键，其结合能为．368．97kJ／mol，还可与环上的三个H原子形成氢键，其氢键键长和结合能分别为0．2000nm／-378．03kJ／mol、0．2339nm／-344，69kJ／mol和0．2301nm／-346，01kJ／mol．结合能包括氢键作用能和正负离子的静电作用能，后者为主要贡献．从理论上展示了该离子液体的氢键结构．     

Optical sensor materials for the detection of amines in organic solvents

A new optical polymer-based sensor was developed, which is able to recognize amines in organic solvents with high sensitivity. Thin polymer membranes were prepared and investigated, which contain a chromogenic functional dye (reactand) that shows a significant colour change during a reversible chemical reaction with the analyte. For that purpose the azo dye 4-trifluoroacetyl-4′-[N-(methacryloxyethyl)-N-(ethyl)amino]-azobenzene (CR-465) was synthesized, which contains a trifluoroacetyl moiety (receptor for interaction with amines) and in addition, a polymerizable methacrylate group. The methacrylate group links the dye covalently to the polymer matrix and the receptor recognizes the analyte via covalent binding. For immobilisation of the dye cross-linked methacrylate polymers with different composition were used. The highly cross-linked polymer network was stable against most organic solvents and exhibited enhanced stability against mechanical strain compared to plasticized PVC. The sensitivity of the reaction between the analyte and the dye was tailored by the choice of the solvent in which the analysis of the sensor layer was performed, with equilibrium constants for 1-butylamine ranging from 80 to 2000 M⁻¹ in chloroform and DMSO, respectively. In toluene as the solvent, sensor layers typically exhibited equilibrium constants of 100 M⁻¹ for 1-butylamine, 1300 M⁻¹ for 1,4-diaminobutane and 20,000 M⁻¹ for tris-(2-aminoethyl)amine. We have also investigated the cross-linked sensor layers with respect to molecular imprinting and did not find any enhancement in selectivity through imprinting in the presence of different analyte molecules.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

Potential distribution around a charged spherical colloidal particle in a medium containing its counterions and a small amount of added salts

A theory is developed for the potential distribution around a charged spherical colloidal particle carrying ionized groups on the particle surface in a medium containing its counterions (i.e., counterions produced from dissociation of the particle surface groups) and a small amount of added salts on the basis of the theory of Imai and Oosawa. Numerical solutions to the Poisson–Boltzmann equation for the potential distribution are obtained for the case of dilute (but not infinitely dilute) particle suspensions of volume fraction 1 for a1 (where is the Debye–Hückel parameter and a is the particle radius). Here we have taken into account the effects of (i) counterions from the particle surface groups, and (ii) the finite particle volume fraction. These effects, which are usually neglected in the conventional Poisson–Boltzmann equation, are found to be important. It is found that, as in the case of completely salt-free media, there is a certain critical value of the particle charge (which is the same as that for the completely salt-free case). When the particle charge is lower than the critical value, the potential is given by a Coulomb potential. If the particle charge is higher than the critical value, then counterions are accumulated in the vicinity of the particle surface (counterion condensation) and the potential becomes less dependent on the particle charge. The above behaviors can be observed even for the case where the electrolyte concentration is higher than the concentration of counterions from the particle surface groups, if the conditions 1 and a1are both satisfied.     

Effect of arrangement of the styryl fragment on the optical properties and complexation of mono-and bis(styryl)-substituted <Emphasis Type="Italic">N</Emphasis>-methylpyridinium perchlorates containing benzo-15-crown-5 ether moieties

Using ¹H NMR spectroscopy and steady-state and time-resolved electronic spectroscopy, the optical properties of mono-and bis(styryl)pyridinium perchlorates and their complexes with Mg²⁺, Ba²⁺ cations were studied. The stability constants of the complexes were determined using spectrophotometric titration. The formation of inclusion complexes for Mg²⁺ and sandwich type complexes for Ba²⁺ results in fluorescence enhancement and increases the lifetimes of the excited states of the initial bis-styryl ligands. The variation of position of the styryl fragment in the pyridinium aromatic ring gives rise to photochromic crown ethers with different optical and photophysical characteristics and is also an easy route to bis(crown-ethers) of symmetrical and unsymmetrical structure. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2092–2100, November, 2007.     

Some polyhydroxy azo–azomethine derivatives of salicylaldehyde: Synthesis, characterization, spectroscopic, molecular structure and antimicrobial activity studies

Some new substituted polyhydroxy azo–azomethine compounds were prepared by reaction of tris(hydroxymethyl)aminomethane with (E)-2-hydroxy-5-(phenyldiazenyl) benzaldehyde and its substituted derivatives. The structures of azo and azo–azomethine compounds were determined by IR, UV–vis, ¹H NMR and ¹³C NMR spectroscopic techniques, and/or X-ray diffraction studies. According to IR spectra, all azo–azomethine compounds adopt keto form in solid state. UV–vis analysis has shown the presence of keto–enol tautomerism in solution for all azo–azomethine compounds, except that for nitro substituted derivative, enol form is dominantly favored in solution. At the same time, above mentioned derivative compounds were studied in vitro for their antimicrobial properties. Among the phenylazosalicylaldehyde series compound tested, 4-phenylazosalicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde, 4-(2-chlorophenylazo)salicylaldehyde, 4-(4-fluorophenylazo)salicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde and 4-(4-ethylphenylazo)salicylaldehyde showed a weak antimicrobial activity only against gram positive bacteria. On the contrary, phenylazosalicylaldehyde series compounds were reacted tris(hydroxmethyl)aminomethane, that exhibited a strong antimicrobial activity against gram positive bacteria, yeast and mould. Moreover, while the 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol did not show an inhibition on tested microorganism, the addition of phenyldiazine groups to 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol resulted in a strong increases in antimicrobial activity.     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

Crown-containing styryl dyes

Styryl dyes containing a crown ether group and a heteroaromatic moiety with a sulfoalkylN-substituent (1a,b) undergo photocyclodimerization in acetonitrile in the presence of Mg(ClO₄)₂ to give only the typeA isomer of cyclobutane derivative (2a,b). The photochemical regio- and stereoselectivity of the cycloaddition is explained by self-organization of thetrans-isomers of the styryl dyes upon complexation with the Mg²⁺ cations into dimers with a fixed mutual arrangement of multiple bonds.For part 7, see ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1449–1452, August, 1993.     

基于天然氨基酸的双环手性季铵盐相转移催化剂的合成及催化性能研究

以L－脯氨酸及L－羟基脯氨酸为原料合成了4个新型手性季铵盐磁相转移催化 剂，并用于催化不对称查耳酮环氧化反应，高产率得到相应环氧化合物，ee最高达 9％。