人工干预压采条件下东风湖泉域地下水环境响应研究

为掌握我国北方典型岩溶泉域在人工干预条件下地下水的动态响应规律,以涉县东风湖泉域为研究对象,结合区内地质、水文地质、2011-2021年地下水位动态监测和地下水压采资料,在分析该地区地下水动态变化特征的基础上,运用GMS软件构建了在人工压采干预作用下的地下水流数值模拟模型,对地下水位变化趋势进行了预测。结果表明：①研究区地下水动态变化明显,具有周期性、滞后性,具体表现为4个变化阶段;②研究区内岩溶地下水整体呈现回升的状态,但是空间分布特征不同,上升区主要分布于下游地区;;③地下水类型为降水入渗-开采型,低水位期基本在5-6月,高水位期在1-2月;④在干预条件下,区内地下水位有着不同程度的回升,南部(下游)浅层水位响应特征值超过15m,中游地下水位响应特征值达到了5-10m,北部(上游)地下水位响应特征值为3-5m;上游和中游地下水位影响整体小于下游,下游水位响应尤为突出。该研究对于泉域内泉的保护以及地下水开发利用和保护具有重要的理论和实际意义。     

适用于DC/DC 变换器的预测函数控制优化策略

针对使用预测函数控制(Predictive Function Control, PFC)的 DC / DC 变换器在负载切换时产生的扰动对变 换器响应速度有较大影响的问题,提出通过设计观测器观测扰动来优化预测函数控制算法的控制效果;相对于其 他提高系统抗扰动的方法,通过设计观测器来提高变换器抗扰动的方法的优点是实现简单、优化后控制效果好等; 设计 Luenberger 观测器对负载切换时产生的扰动进行观测,将观测值反馈给预测函数控制算法进行最优化分析, 并结合仿真结果对目标函数进行调整,优化后的目标函数能更好地响应扰动并尽快达到稳态;最后将优化后的控 制算法与 PI 双闭环控制方法进行比较,结果显示优化后的控制算法在受到扰动后比双 PI 控制方法动态性能更 好,实现了应对负载切换时提高系统动态性能的目标,增强了 DC / DC 变换器的抗干扰能力;优化后的算法只考虑 了负载切换时的扰动对于系统其他方面的扰动没有考虑进去,可以通过设计整个系统的观测器来进一步提高 DC / DC 变换器抗扰动的能力。     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

灰色GM(1,1,k,k2)模型背景值及时间响应函数优化

本文提出了一种新的带有时间幂次项的灰色GM(1,1,k,k²)模型,给出了其灰微分方程和白化微分方程基本形式。基于最小二乘法获得了该模型参数估计值,并推导了该模型时间响应函数。鉴于GM(1,1,k,k²)模型灰微分方程与白化微分方程之间存在跳跃关系,首先对灰微分方程的背景值进行了优化,并推导了优化后的背景值计算公式。为了克服初始值的影响,根据误差平方和最小,进一步优化了GM(1,1,k,k²)模型时间响应函数。最后,该优化后的GM(1,1,k,k²)模型被应用于软土地基沉降预测,获得了较好的模拟预测效果,说明模型是可行的。     

Asymptotic Behavior of a Stochastic Predator-prey Model with Beddington-DeAngelis Functional Response and L\'{e}vy Jumps

A stochastic two-prey-one-predator model with Beddington-DeAngelis functional response and L\''{e}vy jumps is proposed and investigated in this paper. First of all, we prove the existence and uniqueness of the global positive solution, and stochastic ultimate boundedness of the solution. Next, under a simple assumption, by using It\^{o} formula and other important inequalities, some sufficient conditions are established to ensure the extinction and persistence in the mean of the system. The results show that neither strong white noise nor L\''{e}vy noise is conducive to the persistence of the population. Finally, the theoretical results are verified by numerical simulations.     

Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

Fastiterative methods for least squares estimations

Least squares estimations have been used extensively in many applications, e.g. system identification and signal prediction. When the stochastic process is stationary, the least squares estimators can be found by solving a Toeplitz or near-Toeplitz matrix system depending on the knowledge of the data statistics. In this paper, we employ the preconditioned conjugate gradient method with circulant preconditioners to solve such systems. Our proposed circulant preconditioners are derived from the spectral property of the given stationary process. In the case where the spectral density functions() of the process is known, we prove that ifs() is a positive continuous function, then the spectrum of the preconditioned system will be clustered around 1 and the method converges superlinearly. However, if the statistics of the process is unknown, then we prove that with probability 1, the spectrum of the preconditioned system is still clustered around 1 provided that large data samples are taken. For finite impulse response (FIR) system identification problems, our numerical results show that annth order least squares estimator can usually be obtained inO(n logn) operations whenO(n) data samples are used. Finally, we remark that our algorithm can be modified to suit the applications of recursive least squares computations with the proper use of sliding window method arising in signal processing applications.Research supported in part by HKRGC grant no. 221600070, ONR contract no. N00014-90-J-1695 and DOE grant no. DE-FG03-87ER25037.     

Schrödinger invariance and strongly anisotropic critical systems

The extension of strongly anisotropic or dynamical scaling to local scale invariance is investigated. For the special case of an anisotropy or dynamical exponent =z=2, the group of local scale transformation considered is the Schrödinger group, which can be obtained as the nonrelativistic limit of the conformal group. The requirement of Schrödinger invariance determines the two-point function in the bulk and reduces the three-point function to a scaling form of a single variable. Scaling forms are also derived for the two-point function close to a free surface which can be either spacelike or timelike. These results are reproduced in several exactly solvable statistical systems, namely the kinetic Ising model with Glauber dynamics, lattice diffusion, Lifshitz points in the spherical model, and critical dynamics of the spherical model with a nonconserved order parameter. For generic values of , evidence from higher-order Lifshitz points in the spherical model and from directed percolation suggests a simple scaling form of the two-point function.     

秦淮河流域典型排涝泵站前池水质与降雨特征响应关系

为分析排涝泵站前池水质与降雨特征的响应关系,对南京市城区秦淮河沿线2个排涝泵站前池水质以及降水量开展高频在线自动监测,结合回归树方法分析了不同降雨强度、前期干旱时间条件下排涝泵站前池水质变化规律,探讨了不同类型排涝泵站前池水质的主要影响因素。结果表明:晴雨天均有生活污水汇入的A泵站前池氨氮质量浓度在大雨强下降低,中雨强下先升高后降低,小雨强下平缓上升,A泵站前池污染物质量浓度主要受降雨强度和次降水量影响;主要接收降雨径流,雨量大时有生活污水溢流汇入的B泵站,前池污染物质量浓度在大雨强下先升高后逐渐降低,中雨强下降低,小雨强下变化不大,B泵站前池水质主要受次降水量、前期干旱时间和降雨强度影响;2个泵站前池CODMn质量浓度变化与降雨的响应规律相似,但更多受到与前期干旱时间关联的地表径流冲刷作用影响;连续降雨均导致泵站前池氨氮质量浓度和CODMn质量浓度波动变化较大,而前期干旱时间越长,降雨发生后泵站前池水质越差。