空间振动卸料机的力学分析

利用经典力学和振动学原理建立了空间振动卸料机的力学模型和数学模型，并对其求解。在实验基础上导出阻尼系数的计算公式。     

可编程控制器调速器

本文以联合研制成功的水电站可编程控制调速器为对象，详细介绍其硬件与软件构成及工作原理。同时，对多种调节模式等方面也进行了一些探索。     

脉动流诱发有附着物的板振分析

利用压气机与脉动流发生装置，变流体成脉动流注入到工程中的板壳结构上，使其固体结构部分在脉动流的作用下产生强迫振动，这对工业上分离板壳结构表面固体附着物很有实际意义，以薄板为研究对象，导出了薄板横向振动即弯曲振动微分方程，并着重从理论上分析了分离其上的固体附着物的条件及其各种影响因素。     

Quantitative measurement of tip-sample forces by dynamic force spectroscopy in ambient conditions

We introduce a dynamic force spectroscopy technique enabling the quantitative measurement of conservative and dissipative tip-sample forces in ambient conditions. In difference to the commonly detected force-vs-distance curves dynamic force microscopy allows to measure the full range of tip-sample forces without hysteresis effects caused by a jump-to-contact. The approach is based on the specific behavior of a self-driven cantilever (frequency-modulation technique). Experimental applications on different samples (Fischer-sample, silicon wafer) are presented.     

浅谈如何提高IT项目管理的执行力

论述了执行力的概念,分析了影响执行力的各种因素,根据IT项目的特点,提出了提高IT项目管理执行力的措施。     

PMSM的高精度感应电势状态观测器与位置估计

提出了永磁同步电动机考虑参数变化时精确的感应电势关系式新模型,建立了微分型和非微分型两种高精度感应电势观测器,证明了感应电势观测器的稳定性和收敛性,分析了参数变动对位置估计的影响.针对无位置传感器矢量控制系统,以内埋式永磁同步电动机为例进行了仿真实验研究,结果表明设计的感应电势状态观测器具有优良的性能.     

共轴均匀带电薄圆盘间的相互作用力

本文利用静电场的高斯定律和环路定律巧妙地求出了均匀带电圆盘在空间任一点所产生的电场 ,进而计算出了共轴均匀带电薄圆盘之间的相互作用力     

Experimental study and mathematical modelling of a new of vibro-impact moling device

In this paper experimental study and mathematical modelling of newly designed vibro-impact moling rig are presented. The design is based on electro-mechanical interactions of a conductor with an oscillating magnetic field. The rig consists of a metal bar placed within a solenoid which is connected to an RLC circuit, and an obstacle block positioned nearby. Both the solenoid and the block are attached to a base board. Externally supplied alternating voltage causes the bar to oscillate and hit the block resulting in the forward motion of the base board mimicking a mole penetration through the soil. By varying the excitation voltage and the capacitance in the circuit, a variety of system responses can be obtained.In the paper the rig design and experimental procedure are explained in detail, and the mathematical modelling of the rig is described. Then the obtained coupled electro-mechanical equations of motion are integrated numerically, and a comparison between experimental results and numerical predictions is presented.     

Thermoelastoplastic deformation of a thick-walled cylinder with a radial crack

The thermoelastoplastic fracture mechanics problem of a thick-walled cylinder subjected to internal pressure and a nonuniform temperature field is solved by the method of elastic solutions combined with the finite-element method. The correctness of the solution is provided by using the Barenblatt crack model, in which the stress and strain fields are regular. The elastoplastic problem of a cracked cylinder subjected to internal pressure and a nonuniform temperature field are solved. The calculation results are compared with available data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 3, pp. 173–183, May–June, 2008.