郑开大道顶进箱涵临时支撑结构设计

下穿京港澳高速公路顶推箱涵是郑开大道的关键控制性工程,顶进过程中箱涵的裂缝控制是该顶推工程成功与否的重要因素。经实践结果表明,临时支撑结构达到了预期的目的,值得应用推广。     

ON THE OPTIIMAL REACTIONS ASSEMBLAGE OF COMPLEX REACTION SYSTEMS

In this paper, the author analyzes distinguishing features of complex reaction systems and single reversible reaction, and optimizes complex reaction systems starting from set theory.The method of constructing the optimal reactions assemblage and calculating the potential maximum equilibrium yield (PMEY) of objective products is proposed here. This paper points out clearly that the euqilibrium yield of objective products calculated by means of conventional method is the global equilibrium yield (GEY).It is not the thermodynamic constraint, and could be exceeded by observed yield of objective products; only PMEY is the thermodynamic constraint. It gives information on potential and possible optimal yield and thereby improving production. This paper also points out the way in which the real complex reaction system approached the optimal reactions assemblage. The new concept of PMEY and optimal reaction assemblage proposed by this Paper is universally applicable for the important complex reaction systems, such as the pyrolysis of alkane to produce ethylene, steam reforming of methane to produce syngas, production of formaldehyde from methanol, epoxidation of ethylene to produce ethylene oxide, hydrogenation of benzene to produce cyclohexane.     

Computing Aviation Sparing Policies: Solving a Large Nonlinear Integer Program

Deployed US Navy aircraft carriers must stock a large number of spare parts to support the various types of aircraft embarked on the ship. The sparing policy determines the spares that will be stocked on the ship to keep the embarked aircraft ready to fly. Given a fleet of ten or more aircraft carriers and a cost of approximately 50 million dollars per carrier plus the cost of spares maintained in warehouses in the United States, the sparing problem constitutes a significant portion of the Navy’s resources. The objective of this work is to find a minimum-cost sparing policy that meets the readiness requirements of the embarked aircraft. This is a very large, nonlinear, integer optimization problem. The cost function is piecewise linear and convex while the constraint mapping is highly nonlinear. The distinguishing characteristics of this problem from an optimization viewpoint are that a large number of decision variables are required to be integer and that the nonlinear constraint functions are essentially “black box” functions; that is, they are very difficult (and expensive) to evaluate and their derivatives are not available. Moreover, they are not convex. Integer programming problems with a large number of variables are difficult to solve in general and most successful approaches to solving nonlinear integer problems have involved linear approximation and relaxation techniques that, because of the complexity of the constraint functions, are inappropriate for attacking this problem. We instead employ a pattern search method to each iteration of an interior point-type algorithm to solve the relaxed version of the problem. From the solution found by the pattern search on each interior point iteration, we begin another pattern search on the integer lattice to find a good integer solution. The best integer solution found across all interations is returned as the optimal solution. The pattern searches are distributed across a local area network of non-dedicated, heterogeneous computers in an office environment, thus, drastically reducing the time required to find the solution.     

煮糖汁汽加热器故障分析及防止措施

本文对糖厂用煮糖汁汽加热器的不锈钢换热管与管板连接焊缝产生的裂纹和换热管横向断裂问题,进行全面的理论分析,並结合具体情况,提出一些可行的防止焊缝裂纹和管子横向断裂的主要措施。     

稀土添加剂对烃类水蒸汽重整镍催化剂性能的影响——水蒸汽吸附的TPD研究

用程序升温脱附技术,研究了添加稀土的烃类水蒸汽重整催化剂(Ni/α-Al_2O_3)对水蒸汽的吸附性能,同未加稀土的镍催化剂作了对比。结果表明,加有稀土的镍催化剂对水蒸汽的吸附能力主要是稀土的贡献。还原态催化剂对水蒸汽的吸附量比相应的氧化态多1.4倍。发现催化剂对水蒸汽的吸附能力不仅取决于浸渍方式,而且同稀土含量有关。当稀土含量较多时,催化剂表面上呈现出三个能量不同的吸附位。稀土含量少于1.3%时。对提高催化剂吸附水蒸汽的能力已作用不大。含稀土的镍催化剂吸附水蒸汽的能力大,正是其抗结炭性能耐硫性能好的原因。     

Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅲ.合成水滑石用金属盐的影响

采用共沉淀法,用不同金属盐为Cu源和Zn源合成了一系列CuZnAl水滑石,以此为前体经600℃焙烧后制得相应催化剂.用硝酸盐和醋酸盐合成的水滑石结晶度高,其衍生催化剂比表面积大、Cu的分散性好且易于还原;而用硫酸盐和盐酸盐合成的水滑石结晶度差,其衍生催化剂比表面积小、Cu的分散性差且不易还原.反应评价结果显示,用硝酸盐和醋酸盐制得的催化剂活性高、反应稳定性好;而用硫酸盐和盐酸盐制得的催化剂由于低的Cu表面积以及S和Cl的毒化作用而几乎无催化活性.在醋酸盐制备的催化剂上,产物干气中CO的浓度明显较低,在250℃和WHSV=3.28 h-1的条件下约为0.03%~0.04%,仅为硝酸盐所制催化剂上CO浓度的1/5;在210℃和WHSV=0.5 h-1的条件下,该催化剂上甲醇几乎完全转化,同时CO浓度降至约0.005%.N2O滴定、CO2程序升温脱附和程序升温还原结果显示,用醋酸盐和硝酸盐制备的催化剂具有极相近的Cu表面积和表面碱性,但前者CuO的还原峰温较后者低近70℃,归因于ZnO与CuO间的强相互作用,这是催化剂具有良好选择性的可能原因.     

Effect of the composition of nickel-containing composites based on stabilised zirconia on catalytic activity in methane steam conversion

A study was carried out on the composition and nature of the stabilizing additive on the activity of nickel-containing composites based on zirconia in the methane steam conversion. The methane conversions were 91–99% on Ni/ZrO₂(Y, Sc, Ce) at 700–800 °C.     

细支纱摩擦纺初探——尘笼胆结构及其安装角α对纺纱的影响

本文以细支纱摩擦纺为研究对象,利用实验测试手段研究了尘笼胆结构对吸口轴向负压和尘笼胆安装角α对加捻区轴向负压和流速分布的影响。最后,基于类似于控制论中的“黑箱”原理,采用二次正交回归设计在实验室自制单头机上进行了32支纱的纺纱试验,建立了加捻辊加稔效率、纱线品质指标及CV值与尘笼胆几何尺寸、尘笼胆安装角α、摩擦辊转速及纺纱速度间的关系,并作了分析,由此得到选取α=0°、S=6毫米左右较好的结果。