计算钝感炸药爆轰过程的一种新反应率模型

根据钝感炸药爆轰过程中含有激化过程和慢反应,建立了一种新的反应率模型。与其他反应率模型相比,这种反应率模型可以应用于较粗的网格。在每厘米50个网格条件下,炸药驱动铝飞片和钽飞片的自由面计算结果与实验结果很接近。同时,应用此反应率模型计算了钝感炸药驱动LiF过程,在每厘米50个网格的条件下,炸药与LiF间速度的计算值同实验值接近,且误差随网格尺寸变小而变小。这些表明,此反应率模型能够在较粗的网格条件下,比较准确地描述钝感炸药驱动飞片过程,有利于在工程实际中应用。     

Unsteady model of drop Marangoni migration in microgravity

The experiments of drop Marangoni migration have been performed by the drop shift facility of short period of 4.5 s, and the drop accelerates gradually to an asymptotic velocity during the free fall. The unsteady and axisymmetric model is developed to study the drop migration for the case of moderate Reynolds numberRe=O(1), and the results are compared with the experimental ones in the present paper. Both numerical and experimental results show that the migration velocity for moderate Reynolds number is several times smaller than that given by the linear YGB theory. The project supported by the National Natural Science Foundation (19789201) and the Ministry of Science and Technology of China (95-Yu-34)     

Nouvelle approche pour la discrétisation de flux diffusifs en volumes finis à forte obliquité

We propose a new approach for the discretization of diffusive flux on a non orthogonal mesh based on the Deferred correction introduced by Peric. This new method is applied successfully to the solution of a Poisson problem in quadrangular domains meshed with very distorted control volumes. The interest of this approach lies in the fact that the precision of the used schemes is conserved despite meshes distortion level. The comparative study of the value of the spectral radius of iteration matrix enables us to explain why our Deferred correction approach is better than that of Peric, which diverges on highly skewed meshes. To cite this article: Y.M. Ahipo, Ph. Traore, C. R. Mecanique 334 (2006).     

PATH INTEGRAL SOLUTION OF NONLINEAR DYNAMIC BEHAVIOR OF STRUCTURE UNDER WIND EXCITATION

IntroductionThe dynamic behavior of the nonlinear structure under wind excitation has beenobserved very complicated.Taking guyed masts as an example,only a few collapsingaccidents occurred under extreme atmospheric conditions[1],many took place under mild…     

自紧身管疲劳寿命的可靠性分析

基于概率断裂力学理论和Monte Carlo模拟方法，给出了自紧身管疲劳寿命的可靠性分析方法．自紧残余应力采用了符合身管材料具有强化和包辛格效应性能推导的公式计算，身管工作的应力强度因子通过权函数方法得到．实例分析结果表明，对数正态分布为身管疲劳寿命的最佳分布，同时给出了各种置信度和可靠度下的身管疲劳寿命．另外，还分析了初始裂纹尺寸和材料的断裂韧性对身管疲劳寿命的影响．该研究对保证身管的安全，避免灾难性事故的发生具有重要意义．     

Confined buckling of inextensible rods by convex difference algorithms

In this Note we present an approach to determine the local minima of a specific class of minimization problems. Attention is focused on the inextensibility condition of flexible rods expressed as a nonconvex constraint. Two algorithms are derived from a special splitting of the Lagrangian into the difference of two convex functions (DC). They are compared to the augmented Lagrangian methods used in this context. These DC formulations are easily extended to contact problems and applied to the determination of confined buckling shapes. To cite this article: P. Alart, S. Pagano, C. R. Mecanique 330 (2002) 819–824.     

Ultrasonic sizing of embedded vertical cracks in ferritic steel welds

Embedded vertical cracks are very often encountered in structural components necessitating reliable procedure for determining their size. Specialized ultrasonic techniques are required for estimation of through thickness height of these cracks [Mater. Eval. (1970) 28; J. NDI 26 (1977) 320; NND (1975) 146]. The conventional pulse-echo technique has serious limitations for quantitative estimation of vertical cracks because it is subject to variations due to reflectivity, coupling factors etc. The present study aims to improve the accuracy of embedded crack height measurement based on transit time rather than the reflected amplitude [NDT Int. (1982) 315; J. JSNDT 27 (1978) 118]. A unique method has been developed for generating known sizes of fatigue cracks ranging from 2.5 to 18 mm in height and 15 mm in length. These cracks were generated in rectangular steel specimens and subsequently embedded at predetermined locations using welding. These welded specimens containing the embedded vertical cracks were examined using ultrasonic techniques based on transit time like (a) flaw tip echo method and (b) mode conversion method. Using both the techniques excellent agreement was obtained between the estimated crack height and actual crack height with an accuracy of ±1 mm.     

多层材料结构的界面裂纹尖端复应力强度因子

本文建立了一种多层材料复合结构的界面裂纹问题分析模型。当两种材料之间插入第三种薄层弹性材料,裂纹位于第三种材料与第一或第二种弹性材料的界面上,且插页材料3~#的厚度相对于裂纹尺寸或平面内其他尺寸很小时,可以得到该问题裂纹尖端的复应力强度因子通式。本文用有限元法对结果进行了数值验证,并进行了有关问题的讨论。     

不同材料界面上受τ_0t~n型载荷作用的扩展裂纹问题

变量t的任意连续函数在任意闭域中都可以用多项式a_nt~m来一致的逼近,进而t的任意函数都可以表示为函数t_ot~n的线性叠加,利用复变函数理论,我们将在不同材料界面上受t_ot~n型载荷作用的扩展裂纹问题化为解析函数理论中的Keldysh-sedov混合问题,本文给出了这一问题的闭合解,并且这一解可以作为Green函数使用。     

Analysis of penetration of axisymmetric projectiles into semi-infinite targets

The process of penetration of a projectile into a semi-infinitetarget is studied in this paper. Using certain assumptions, the propagation of plastic wave in the target is analyzed and the pressure on the surface of penetrator is given. The results calculated from the formulas of this paper agree well with experimental data and numerical results.