桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

Selecting parameters and limits for equipment operational qualification

While operational qualification (OQ) is a well-established term within equipment qualification, users of equipment often become unsure when it comes to implementation. The biggest problem is how to select procedures and acceptance criteria. Should these be the vendor's specifications or should the users define their own limits, and, if so, how? Should all instruments of the same type have the same values or should these be optimized for each individual instrument? This article will provide an overall strategy and specific examples for HPLC on how to select procedures and acceptance limits that are based on efficient use of resources, on practicality and on the intended use of the equipment.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.     

非均相羰基氧化合成碳酸二苯酯反应液组分的分析

通过色质联用仪对非均相催化一步合成碳酸二苯酯(DPC)过程中的反应液的主要产物及副产物进行了定性分析，其结果发现该反应的主要副产物为苯氧基丙酸和4-苯氧基苯酚以及四丁基铵盐；用气相色谱外标法对反应液中的DPC进行了定量分析，并通过回归法得到了定量分析：DPC的计算方程式，实验证明该方程在DPC的浓度小于10％范围内比较可靠。     

粘度国家基准装置测量结果的不确定度

分析粘度国家基准装置测量结果不确定度的来源并进行评定。影响粘度国家基准装置测量不确定度的主要因素有温度、时间、表面张力、空气浮力以及动能修正等。根据2002年粘度国家基准量值复测的结果，以及改造后新基准装置和辅助设备的状态，计算得粘度国家基准装测量结果的扩展不确定度为0.038%-0.4%。     

2-氨基-4, 6-二甲基嘧啶与锌盐配合物的制备及生成焓测定

Thepyrimidinesasaclassareknowntopossessextraordinarybiologicalpropertiesthataregenerallydistinguishedqualitativelybytheirapplicationsinpesticide,herbicide,bactericide,andmedicineinter-mediates犤1犦.Asurveyoftheseapplicationsandanum-beroftherelatedvariationsthataredevelopedrecent-ly,suchastheextraordinaryeffectiveherbicideofsulfonylsulfourea,revealsthebroadbiologicalimpor-tancejustbecauseofthewideoccurrenceofpyrimi-dinesringsystemsinthesemolecules犤2犦.Ithasbeenshownthatthemedicineintermediates…     

Applicability of glass fiber as a support material for generation of gaseous standard mixtures using thermal decomposition of the surface compound. Calibration of analytical equipment

The use of glass fiber as a support material for a surface compound serving to generate gaseous standard mixtures of ethene is described. The technique is based on the process of thermal decomposition of the surface compound in a desorber connected on‐line via a multi‐port valve to the calibrated device. The surface compound undergoes thermal decomposition at 245°C, yielding known amounts of ethene. The method enables on‐line preparation of a standard mixture immediately before the calibration step. Consequently, it can be also applied for the generation of standard mixtures containing volatile, malodorous, unstable, and toxic compounds.     

D072型树脂脱除过氧化氢中金属阳离子的工艺研究

实验考察D072型阳离子交换树脂在交换柱中脱除过氧化氢中微量金属阳离子的动态行为．通过改变料液流速、高径比、料液中交换离子浓度及料液组成等参数，绘制不同条件下的透过曲线，以此考察D072型树脂对过氧化氢中金属阳离子的动态交换性能，从而确定适宜的工艺条件，为工业化生产提供科学依据．     

用质谱技术对钾、钙同位素体系特征参数测定的初探

报道了用FinniganMAT 2 62质谱技术和同位素稀释法测定了光谱纯CaO和国际二级标准Tahiti(CaCO3)的同位素40 Ca 42 Ca比值以及后者的40 Ca含量 ,RSD分别为 0 .0 2 %和 0 .1 %。对国家钾标样的测定表明 :39K、40 K和41 K同位素丰度分别为 0 .93 2 60± 0 .0 0 1 2、0 0 0 0 1 1 2 0± 0 .0 0 0 0 1 2 9和 0 .0 672 86± 0 .0 0 0 1 2 5。其中39K含量为 0 .1 2 1 72± 0 .0 0 0 2 9,与标准值在误差范围内一致。实验测定结果为在我国开展40 K 40 Ca同位素体系的定年和环境的示踪研究打下了基础