用模拟万用表测电容

介绍了用模拟万用表和秒表测量电容的简单方法，对测量结果的误差原因进行了分析，给出了提高测量精度的几点措施。     

灰铸铁的应力屈服曲面及其三维热弹塑性应力解析

对原有的灰铸铁件应力屈服曲面进行了合理的简化,使其在理论上合理,工程应用上更为方便。建立了灰铸铁件三维非稳态热弹塑性应力场的有限元方法。以灰铸铁哑铃件为对象,用新屈服曲面对其应力发展过程进行了模拟,且比较了用新旧屈服面计算得到的结果。     

小麦群体连续选择效应的综合分析

本试验对由信谷核不育基因构成的异效群体内４个性状进行连续两轮歧化选择，并将所得数据进行群体综合分析。结果表明：整个群体的平均表现和变异程度未发明显变化；但群体分布状况有一定改变，尤其是每穗粒数的分布数化较为明显；株高和千粒重的有效因子数估计基本符合小麦遗传实际表现，每穗粒数的有效有效因子数估计略低，说明此性状遗传背景较为简单。     

发电厂相变干冷排热系统优化与不确定性分析初探

通过火力发电厂相变空气干式冷却排热系统的热经济学分析，提出了相变干式冷却系统优化的目标函数和优化参数，利用数值计算的可变容差法进行优化计算，取得了满意的结果，为了保证优化在可变经济环境的可靠性动力稳定性， 对优化结果进行了不确定性分析。     

聚类分析在髁突骨密度分析中的应用

本研究应用聚类分析的方法，对人离休髁突×片进行数字图像技术处理所获得的影像密度数值做了详细分析，取得人髁突不同区的骨密度分布及不同年龄阶段髁突密度变化的情况。该方法避免了人为因素的影响，其结果较客观地反映了髁突的骨质密度；为研究病理状态时髁突骨密度的改变提供参考。     

梯形水平折梁的内力分析

本文对梯形水平折梁（０≤α＜∏２）和矩形水平折架（α＝∏２）用最小余能原理进行了内力分析，并导出了相应的计算公式，可在工程结构设计中采用     

泛Loeb可测集的S-饱和性

在 K-饱和的非标准模型中,研究了泛 Loeb 可测集 m(A),pns(~*X),cpt(~*X),fin(~*X),ns(~*X)的 S-饱和性.当 A 是紧致 Hausdorff 空间 X 的子集时,得到了 st~(-1)(A)是标准集的充分条件.     

汽车新能源分析

车用燃料是汽车工业的血液，为了减少对石油产品的依赖并解决环境污染问题，寻找一种替代性、干净的代用汽车燃料巳成为汽车工业迫待解决的技术课题，本简要分析了汽车工业几种可行的新能源。     

A Study of Protein and Glycoprotein Syntheses in Pre-implantation Mouse Embryos Using Mini-2D-Electrophoresis, Video Densitometer Scanning and Computer-Image Analysis

In the present study, proteins and glycoproteins of mouse embryos at 2-cell,morula and blastocyst stages were analyzed.The techniques of ~(35)S-Met incorporation,ConA antiserum-precipitating ConA-binding proteins, mini-2D-electrophoresis, fluorography,video densitometer scanning and the computer-lmage system were used for analyses.Results of the investigations indicated that proteins and glycoproteins were synthesized by the embryos in a gradual increase manner from 2-cell to blastocyst. A relatively large amount of glycoproteins was synthesized during the morula and blastocyst stages.Two specific small glycoproteins respectively with molecular weights about 6500 and 9000 and PIs at 5.0 and 6.5 were apparently synthesized in the blastocyst but not in the 2-cell or the morula.     

On practical metrology and chemical analysis: etalons and traceability systems

 National measurement systems are infrastructures to ensure, for each nation, a consistent and internationally recognised basis for measurement. Such complex systems have historical, technical, legal, organisational and institutional aspects to connect scientific metrology with practical measurements. Underlying any valid measurement is a chain of comparisons linking the measurement to an accepted standard. The ways the links are forged and the etalons (measurement standards) to which they connect are defining characteristics of all measurement systems. This is often referred to as traceability which aims at basing measurements in common measurement units – a key issue for the integration of quantitative chemical analysis with the evolving physical and engineering measurement systems. Adequate traceability and metrological control make possible new technical capabilities and new levels of quality assurance and confidence by users in the accuracy and integrity of quantitative analytical results. Traceability for chemical measurements is difficult to achieve and harder to demonstrate. The supply of appropriate etalons is critical to the development of metrology systems for chemical analysis. An approach is suggested that involves the development of networks of specialised reference laboratories able to make matrix-independent reference measurements on submitted samples, which may then be used as reference materials by an originating laboratory using its practical measurement procedures. Received: 31 July 1995 Accepted: 19 August 1995