钢管混凝土组合柱耐火性能对比分析

采用非线性有限元软件ABAQUS对方钢管混凝土柱、复式钢管混凝土柱、内嵌十字型钢钢管混凝土柱和4腔钢管混凝土柱4种钢管混凝土组合柱开展火灾下的力学分析,并采用相关实验数据进行验证.分析不同荷载比下钢管混凝土组合柱的温度场、位移-时间曲线、截面内力重分布等.结果表明：内嵌型钢(钢管)有助于提升柱体的轴向刚度,钢管混凝土组合柱的破坏模态表现为压缩鼓曲破坏;低荷载比下内嵌钢管允许方钢管发生更高的温度材性劣化,进而提升了柱体的耐火性能,火灾荷载比越小,提升效果越显著.     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

新型钢管砼框架节点试验研究及其应用

给出了钢管混凝土框架节点的试验结果,并采用有限元法对新型节点模式进行了应力场分析。介绍了该新型节点的设计方案及在实际工程中的应用。     

LF-CD-CC过程中钢液温度控制模型

在分析ＬＦ－ＶＤ－ＣＣ过程各阶段热平衡状况的基础上,开发了ＬＦ－ＶＤ－ＣＣ过程中钢液温度控制模型。用该模型模拟计算了ＬＦ－ＶＤ－ＣＣ过程的温度变化。结果表明,该模型对预报过程钢水温度,计算的命中率较高,可用于工业生产．     

Leakage of mantle helium from the Liaodong Peninsula, China

The isotopic cumpositions of helium have been investigated in hot spring gases sampled from the Liaodong Peninsula. China. The³He/⁴He ratios range from 0.14 Ra (0.14 times the atmospheric³He/⁴He ratio of 1.40 × 10^-6 to 0.72 Ra.³He/⁴He versus⁴He/²⁰Ne ratios and He contents suggest that a small amount of mantle-derived helium reaches the earth’s surface. Helium iwtope ratios of the hot spring gases show a distribution pattern similar to the regional heat flow values, indicating that the positive thermal anomaly occurring in the rtrea is closely associated with the presence of mantle-derived helium. The observations described above provide some significant evidence that the molten magma originating from partial melting of the upper mantle may have intruded into the continental crust along the activity fault. The coupling of the presence of mantle He and heat flow anomalies to seismic activity in studied region seem to imply that there is an internal relationship between mantle degassing and seismic activity.     

火力发电厂汽机房屋盖结构选型分析

本文对汽机房屋盖结构的两种受力体系进行了技术经济比较,阐述了空间网架在我国的应用情况,介绍了平板型网架应用在火力发电厂汽机房屋盖中的可行性及经济性。根据工业厂房建筑中的传力路线,分析了用于汽机房屋盖结构的平板型网架考虑吊车水平刹车力作用时的内力分布特点及其应用,提出了汽机房屋盖结构使用平板型网架的观点     

我国优秀女排运动员弹跳力发展及其训练的分析研究

本文通过对我国优秀女排运动员及其后备人材不同年龄阶段弹跳力素质发展的分析研究,探讨女排运动员弹跳力素质发展变化的规律,及其不同年龄阶段主要训练手段的选择．为女排运动员科学选材、科学训练、制定多年训练计划等方面提供理论依据．     

埋藏式钢管的抗外压稳定研究

应用壳体稳定理论结合某一工程实例研究了圆形加劲环式钢管和锚筋式钢管的抗外压稳定问题。首先分析了非对称外压对失稳荷载的影响;其次根据壳体稳定分析结果对锚筋式和加劲环式钢管的失稳形态和影响因素进行了分析,并对现有计算公式进行了评述。结果表明,对锚筋式和加筋环式钢管采用本文提出的按壳体稳定理论建立的有限元计算公式是可靠合理的。     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.