Principle of Mangling Correction of Plate-welding Section Steel and its Application

Thanks to the fantastic development of power, transportation, chemical engineering, architecture and other fields, there has been an increasing demand for new type of section steel with large sections used for construction frame, such as type-H, type-T, and type-C section steel. New types of section steel usually are long and with large cross section. Therefore, for the sake of the cost, steel plate welding structure is used home and abroad. During the welding process, welding distortion seems unavoidable. ...     

大型钢结构人行景观天桥的有限元分析

采用有限元方法对大型钢结构人行景观天桥进行了静力学、温度应力、动力学模态和初步的抗震能力分析,并就桥自重作用下的最大竖向位移和实际观测结果进行了比较,两者是一致的.计算结果表明:人行景观天桥在常规、温度极值改变和多遇地震荷载作用等多种工况下,现有的设计方案具有足够的强度、刚度和抗震能力.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

钢结构发展现状与对策

首先简要地介绍了国内外钢结构的发展现状，尤其是我省发展钢结构的前景和存在的主要问题，同时在分析论证的基础上，提出了在我国加入WTO后推广钢结构的对策和措施。     

Effect of hydrogen on interatomic bonds in austenitic steels

Mössbauer spectroscopy was used to investigate the influence of dissolved hydrogen on the interatomic bonds in austenitic steels. It was carried out to prove the decohesion mechanism of hydrogen embrittlement (HE). It is shown that hydrogen increases Debye temperature, i.e., the interatomic bonds in hydrogenated austenitic steel becomes stronger.     

水下沉桩施工新技术

肇庆换流站供水工程之一的五尺峡取水泵站施工中，在受施工条件限制的情况下，采用将钢筋混凝土预制桩改为开口钢管桩，将双排桩改为单排桩，尝试搭设水上竹平台作沉桩施工平台等措施均取得成功，保证了质量、安全、进度，降低了施工成本．     

加热炉推钢机系统的振动分析

根据加热炉推钢机的工作原理和特点，对推钢机推力进行校核计算并分析了其影响因素，阐述了加热炉推钢机系统的振动问题，指出了生产振动的原因，提出了改进措施，对现场解决加热炉推钢机系统的振动问题具有一定的指导意义．     

20#管线钢在役焊接HAZ的组织与性能研究

在役焊接过程中，管内流动介质的快速冷却，易使接头出现氢致裂纹。对20^#管线钢在不同冷却条件和不同焊接线能量下的HAZ的组织性能进行了模拟研究。结果表明，在流动水冷却下，HAZ出现较多的贝氏体、马氏体和MA组元等不平衡组织，使得HAZ的硬度高达330HvN5，性能最差。采用大的线能量焊接，形成较多的上贝氏体和粒状贝氏体组织，对改善接头性能有利。因此，在避免烧穿的前提下增大焊接线能量或减小管内介质的冷却能力，减少高硬度不平衡相的形成，可以降低HAZ氢致开裂敏感性。     

一类非线性弹簧振子的周期性振动

本文用数值计算的方法讨论了一类非线性弹簧振子的周期性振动及其特点．     

Inhibiting effects of some oxadiazole derivatives on the corrosion of mild steel in perchloric acid solution

The efficiency of 3,5-bis(n-pyridyl)-1,3,4-oxadiazole (n-POX, n = 1, 2, 3), as corrosion inhibitors for mild steel in 1 M perchloric acid (HClO₄) have been determined by weight loss measurements and electrochemical studies. The results show that these inhibitors revealed a good corrosion inhibition even at very low concentrations. Comparison of results among those obtained by the studied oxadiazoles shows that 3-POX was the best inhibitor. Polarisation curves indicate that n-pyridyl substituted-1,3,4-oxadiazoles are mixed type inhibitors in 1 M HClO₄. The adsorption of these inhibitors follows a Langmuir isotherm model. The electronic properties of n-POX, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR).