化学激光器1/4环柱型增益发生器

设计并搭建了化学激光器1/4环柱型增益发生器的实验系统。按设计流量进行了出光实验,功率计探测到的出光功率在60 W左右。测量了燃烧室温度及压力,与Alpha激光器HL911-3实验数据类似,燃烧室温度及压力曲线都存在一个爬升阶段。环柱型增益发生器沿角向扩张的特点使得光腔区压力很低,仅为0.5 kPa左右。为验证环柱状增益区的有效形成,对3对取光孔分别进行了出光实验,结果表明每对取光孔都有功率输出,证明设计的增益发生器运行正常。

     

High‐Temperature Spray‐Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens

Living Micrococcus luteus (M. luteus) and Escherichia coli (E. coli) are encapsulated in poly(vinyl alcohol), poly(vinylpyrrolidone), hydroxypropyl cellulose, and gelatin by high‐temperature spray drying. The challenge is the survival of the bacteria during the standard spray‐drying process at temperatures of 150 °C (M. luteus) and 120 °C (E. coli). Raman imaging and transmission electron microscopy indicate encapsulated bacteria in hollow composite microparticles. The versatility of the spray‐dried polymer bacteria microparticles is successfully proved by standard polymer solution–processing techniques such as electrospinning, even with harmful solvents, to water‐insoluble polyacrylonitrile, polystyrene, poly(methyl methacrylate), and poly(vinyl butyrate) nanofiber nonwovens, which opens numerous new opportunities for novel applications.     

Solar photocatalytic activities of porous Nb-doped TiO2 microspheres prepared by ultrasonic spray pyrolysis

Ultrasonic spray pyrolysis method was used to prepare Nb-doped TiO₂ porous microspheres with an average diameter of 500 nm for solar photocatalytic applications. The effect of Nb-doping on morphology, structure, surface area, as well as spectral absorption properties of TiO₂ microspheres was investigated with SEM, TEM, XRD, Raman spectra, BET, and UV-Vis absorption spectra. The Nb-doping decreased the grain size of TiO₂ porous microsphere, and influenced its surface area and pore size distribution dependent on the doping concentration, but changed negligibly the morphology and size of TiO₂ microspheres. Moreover, the Nb-doping was observed to extend the spectral absorption of TiO₂ into visible spectrum, and the absorption onset was red-shifted for about 88 nm at a doping level of 5% compared to pristine TiO₂ microspheres. Under solar or visible irradiation, Nb-doped TiO₂ microspheres showed higher photocatalytic activity for methylene blue degradation compared with TiO₂ microspheres, which could be ascribed to the extended light absorption range and the suppression of electron-hole pair recombination.     

Study of zinc thiocarbamide chloride,a single-source precursor for zinc sulfide thin films by spray pyrolysis

Thermal decomposition of the title compound, Zn(tu)₂Cl₂ (tu=thiourea), was studied up to 1200°C in dynamic inert (N₂) and oxidative (air) atmospheres using simultaneous TG/DTA techniques. In addition, XRD and IR were employed ex situ to resolve the reaction mechanism and products. Cubic ZnS (sphalerite) is formed below 300°C in both atmospheres and is observed until 760°C, whereafter it transforms in nitrogen to the hexagonal ZnS (wurtzite). EGA by FTIR revealed the complexity of the decomposition reactions involving also the evolution of H₂NCN, which reacts to form hexagonal ZnCN₂ as revealed by an XRD analysis. This revised version was published online in July 2006 with corrections to the Cover Date.     

Direct drug analysis from oral fluid using medical swab touch spray mass spectrometry

Fourteen common drugs of abuse were identified in spiked oral fluid (ng mL⁻¹ levels), analyzed directly from medical swabs using touch spray mass spectrometry (TS-MS), exemplifying a rapid test for drug detection. Multiple stages of mass analysis (MS² and MS³) provided identification and detection limits sought by international forensic and toxicological societies, Δ⁹-THC and buprenorphine excluded. The measurements were made using a medical swab as both the sampling probe and means of ionization. The adaptation of medical swabs for TS-MS analysis allows non-invasive and direct sampling of neat oral fluid. Data acquisition was rapid, seconds per drug, and MS³ ensured reliable identification of illicit drugs. The reported data were acquired to investigate (i) ionization of common drugs from commercial swabs, (ii) ion intensity over spray duration, and (iii) dynamic range, all as initial steps in development of a quantitative method. The approach outlined is intended for point-of-care drug testing using oral fluid in clinical applications as well as in situ settings, viz. in forensic applications. The proof-of-concept results presented will require extension to other controlled substances and refinement in analytical procedures to meet clinical/legal requirements.     

无溶剂超临界CO2喷射成型技术制备万古霉素/PLGA纤维制剂及体外缓释性能研究

利用无溶剂超临界二氧化碳喷射成形技术,制备可降解高分子万古霉素缓释纤维,并对其体外万古霉素释放性能进行了研究。通过条件试验确定了最适合的成形工艺参数;选择有代表性的PLGA作为主体缓释材料,万古霉素作为实验对象,建立了上述万古霉素制剂体系的体外缓释模型和分析方法;结合缓释材料的降解情况对万古霉素缓释的机理进行了研究。     

Comparative Study of Plasma Spray Flow Fields and Particle Behavior Near to Flat Inclined Substrates

Numerical models have been developed using computational fluid dynamics (CFD) analysis program FLUENT V6.02^© to investigate the effect of the substrate on the behavior of the plasma flow fields and in-flight particles. Simulations are performed for cases where flat substrates are either present or absent, for the former, the substrate is oriented perpendicularly or inclined to the torch axis. It is shown that although the presence of perpendicular or inclined substrate significantly influences the plasma flow fields at the vicinity of the substrate, the particle behavior remain relatively unaffected. The insignificant effect of the substrate on particle behavior is qualitatively verified by experimental observation using SprayWatch^© imaging diagnostics equipment. Images captured by the equipment confirm that the particles travel through the plasma plume with high momentum and show no sudden change in theirtrajectories right before impacting the substrate. Both the numerical and experimental findings show that the freestream model is sufficiently detailed for future work of this nature.     

Numerical study on soot removal in partial oxidation of methane to syngas reactors

The serious carbon deposition existing in catalytic partial oxidation of methane (CPOM) to syngas process is one of the key problems that impede its industrialization. In this study, 3-dimensional unsteady numerical simulations of the soot formation and oxidation in oxidation section in a heat coupling reactor were carried out by computational fluid dynamics (CFD) approach incorporating the Moss-Brookes model for soot formation. The model has been validated and proven to be in good agreement with experiment results. Effects of nozzle type, nozzle convergence angle, channel spacing, number of channels, radius/height ratio, oxygen/carbon ratio, preheat temperature and additional introduction of steam on the soot formation were simulated. Results show that the soot formation in oxidation section of the heat coupling reactor depends on both nozzle structures and operation conditions, and the soot concentration can be greatly reduced by optimization with the maximum mass fraction of soot inside the oxidation reactor from 2.28% to 0.0501%, and so that the soot mass fraction at the exit reduces from 0.74% to 0.03%.     

超声喷雾电离源的研制与表征

研制了超声喷雾电离源(SSI)。采用核糖核酸A、溶菌酶等样品和商品化的线性离子阱质谱仪对该电离源进行了表征。实验发现,对于生物大分子,超声喷雾电离质谱(SSI-MS)能够获得与电喷雾质谱(ESI-MS)类似的多电荷离子。但与同等条件下ESI-MS所获得的谱图相比,SSI主要获得低价态的多电荷离子。在此基础上,系统考察了SSI-MS各主要操作参数对不同价态蛋白质多电荷离子信号强度的影响,并提出了SSI离子化的可能机理。结果表明,在喷雾气压3.4~3.6 MPa、喷雾口到质谱入口的距离4~6 mm、离子传输管温度250~300℃、样液流速50~100μL/min、2%~5%甲酸酸性且不含甲醇的条件下,各价态蛋白质离子信号强度及信号分布均达到最优;而离子传输管温度越高,喷雾压力越大或溶剂中甲醇等挥发性成分越高,则越有利于低价态离子的形成。