垃圾在流化床中焚烧NO排放特性研究

在Ф150 mm流化床上，研究了六类典型组分垃圾NO转化率与床温和过量空气系数(excess air简称EA)的关系。研究发现，纸渣与木块NO转化率最高，橡胶与塑料最低;织物、纸张、厨余、木块、塑料NO均具有中温生成特性，一般在800 ℃～850 ℃时即接近最大值，之后温度升高对NO的生成影响不大;橡胶与无烟煤由于含N化合物结构稳定，其NO转化率随床温升高而增大;由于挥发分析出的相互影响，较低的火焰温度，混合垃圾NO转化率一般低于单组分垃圾的线性叠加;少量水分不会对垃圾NO转化率造成很大影响，相反还会促进NO的转化，但过量水分会抑制NO的生成。     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

循环流化床(CFB)煤/焦气化反应的研究 Ⅰ.操作气速、固体循环速率对循环流化床气化反应的影响

报道了山西西山焦煤飞灰，在小型循环流化床气化反应器上，以二氧化碳为气化介质，在不同操作条件下（气速、固体循环速率）的气化反应。研究结果表明，ＣＯ出口浓度及碳转化率随着ＣＦＢ操作气速减小、固体颗粒循环速率的增加而增加。即在ＣＦＢ床中，提高气体、固体停留时间（床内固体颗粒浓度）有利于ＣＦＢ气化的进行。ＣＯ浓度及碳转化率沿床高的变化趋势与床内颗粒浓度分布一致。     

Liquid fluidized bed starter culture ofTrichoderma reesei for cellulase production

A starter culture ofTrichoderma reesei (Rut-C30) prepared in a liquid fluidized bed reactor (LFBR) gave better growth and greater cellulase production in submerged fermentation than a conventional shake flask inoculum. The LFBR starter was prepared by first coatingT. reesei spores to 0.25 mm size corncob (1.0x10⁸g^-1) in a medium containing 1.0% corncob, 0.5 gL^-1 xylose and 0.1 gL^-1 lactose in a balanced salt solution, then fluidizing the particles in the LFBR for 36 h to allow germination of the spores, and covering the particles with an approx 30 μm thick biofilm. This biofilm that developed in constant adherence to the lignocellulosic carrier, apparently became well adapted to grow rapidly on insoluble cellulose substrates (Solca Floc), and had the enzymes of the cellulase complex induced for increased cellulase production. The LFBR starter used in a stirred tank reactor (STR) gave 15 gL^-1 biomass production and 6.5 IU mL^-1 overall cellulase activity with a volumetric productivity of 64 IU L^-1h^-1 in a 5 d fermentation, compared with a 7 d shake flask inoculum that gave 11 gL^-1 biomass and 3.2 IU mL^-1 cellulase activity, with a volumetric productivity of 31IU L^-1h^-1. The LFBR starter culture retained its viability in dry storage for 6–9 mo.     

扩张床吸附技术

扩张床是流化床的一种特例。它具有流化床的特点,能处理含悬浮颗粒的液体。又具有固定床的优点,流动成活塞流;返混程度低,分离效率高。作为蛋白质的初步分离方法,它能取代固液分离、浓缩和初步纯化等三步操作。具有提高收率、降低投资费用、缩短操作时间等优点,成为生物工程下游过程的研究热点。本文综述了近年来扩张床吸附技术的发展。包括：1、原理：床层的分层稳定性、吸附剂和吸附柱;2、操作：吸附、洗涤、洗脱和再生4个步骤;3、流动动力学特性：床层扩展特征和停留时间分布;4．在蛋白质纯化中的应用。     

Porous ceramic bed supports for fused silica packed capillary columns used in liquid chromatography

Porous ceramic bed supports for fused silica packed capillary columns utilized in liquid chromatography were prepared by polymerizing solutions containing potassium silicate in-situ within a column to create a mechanically stable, rugged, and easily constructed termination. The effect of the bed support length on efficiency, and comparisons to glass wool bed supports, were considered in terms of column efficiencies and hydrodynamic variables. Results obtained indicate better performance for the ceramic bed support.     

12兆瓦热电气多联产装置的开发

介绍了为解决某钢铁企业的中热值煤气，蒸汽和电的短缺而开发的一台12MW的热电气多联产装置，在该系统中，把一台流化床气化炉和一台75t/h循环流化床锅炉结合在一起，从而实现煤气和蒸汽联产，在详细介绍了该装置的设计思想和结构特点的同时，用所建的热电气多联产模型对该装置包括煤气产量，煤气成分，煤气热值和系统运行温度等在内的性能参数进行了预测。     

Adsorption Characteristics of Pb(II) and Cr(III) onto C‐4‐Methoxyphenylcalix[4]Resorcinarene in Batch and Fixed Bed Column Systems

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C‐4‐methoxyphenylcalix‐[4]resorcinarene (CMPCR) in batch and fixed bed column systems has been conducted. CMPCR was produced by one step synthesis from resorcinol, 4‐methoxybenzaldehyde, and HCl. The synthesis was carried out at 78 °C for 24 hours and afforded the adsorbent in 85.7% as a 3:2 mixture of C_4ν:C_2ν isomer. Most parameters in batch and fixed bed column systems confirm that CMPCR is a good adsorbent for Pb(II) and Cr(III), though Pb(II) adsorption was more favorable than that of Cr(III). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch and fixed bed column systems followed a pseudo 2ⁿ order kinetics model. The rate constant of Pb(II) was higher than that of Cr(III) in the batch system, but this result was contrary to the result obtained in a fixed bed column system. Desorption studies to recover the adsorbed Pb(II) and Cr(III) were performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.     

生物浮动床处理电厂厂区生活污水

利用"生物浮动床-过滤-臭氧杀菌"技术处理电厂厂区生活污水,耐有机负荷冲击和水力冲击的能力强,对CODcr、氨氮、总磷有较好的去除效果.CODcr总去除率最高可达到95%,出水CODcr稳定在10～30 mg/L;总磷去除率达到50%以上,出水总磷质量浓度低于0.5mg/L;对NH3-N的去除率基本可以稳定在80%以上;浊度消减率可达到84%,细菌杀灭率大于99.9%,出水细菌浓度小于1/L.     

片状化石燃料的循环流化床燃烧(Ⅰ)--片状颗粒的形貌描述和流态化阻力特征描述

比较了不同球形度概念对片状化石燃料的描述效果,研究了片状化石燃料球形度变化对其流态化特征的影响.分析了Krumbein球形度为0.1～0.4的京西无烟煤在一台50MW循环流化床锅炉上表现出来的特殊现象,如运行床温和炉膛压力大幅度波动、依靠排放冷渣保持稳定运行,揭示了这些现象发生的原因.