千枚岩隧道破碎带 TSP 超前预报解译标志

千枚岩等软岩隧道施工中易出现垮塌等地质灾害。以典型千枚岩隧道———汶马高速公路鹧鸪山隧道为例,以地震波传播理论为依据,结合工程地质分析及地震波正演模拟,探讨TSP 预报中针对千枚岩构造破碎带在不同含水率状况下的地震波反射特性及解译标志,结果表明：纵波及横波遇千枚岩构造破碎带反射现象明显,横波较纵波反射更强烈;破碎带富水时,千枚岩泥化变软,纵波反射加强;从深度偏移角度分析,破碎带内正负反射频繁变化,单个反射层延伸性差。研究结果可以提高 TSP 在软岩隧道中的预报准确性。     

爆轰波对碰驱动平面锡飞层的动力学及动载行为特征研究

强冲击下的物质变形、破坏及诱发的轻重介质混合问题,是内爆压缩科学和工程应用领域的研究重点.本文针对爆轰波对碰条件下的复杂加载动力学过程及其动载破坏形态特征,开展数值模拟研究与极曲线理论分析.设计了爆轰波对碰驱动平面锡飞层的计算模型,获得了爆轰加载动力学过程及波系相互作用物理图像,分析了锡飞层对碰区自由表面速度历史的典型特征.给出了锡飞层中折射激波对碰发生马赫反射的临界条件,解读了三波结构的传播行为,阐明了对碰区内存在"一维正冲击"区域,一维区外存在单次斜冲击向两次斜冲击过渡的复杂加载动力学过程,提出了对碰区冲击动力学模型,揭示了影响对碰区动载行为特征的机理.数值模拟结果与极曲线理论分析结果相互印证,符合较好.本文的研究成果,将为深入理解和解读对碰区特殊的物质破坏及混合现象提供重要的理论支撑.     

Ultrasound-assisted crystallization (sonocrystallization)

The positive influence of ultrasound (US) on crystallization processes is shown by the dramatic reduction of the induction period, supersaturation conditions and metastable zone width. Manipulation of this influence can be achieved by changing US-related variables such as frequency, intensity, power and even geometrical characteristics of the ultrasonic device (e.g. horn type size). The volume of the sonicated solution and irradiation time are also variables to be optimized in a case-by-case basis as the mechanisms of US action on crystallization remain to be established. Nevertheless, the results obtained so far make foreseeable that crystal size distribution, and even crystal shape, can be ‘tailored’ by appropriate selection of the sonication conditions.     

面波有限频率法3-D灵敏度核函数的计算

高分辨率面波成像应克服射线理论的高频近似假设,考虑有限频率效应.该文给出了一种计算面没有限频率3-D灵敏度核函数的方法.该方法可直接计算球壳层状地球模型中面波振型特征值和特征函数,而不再需要采用球化平变换来近似计算球壳层状地球模型中面波频散参数.作者计算了相位延迟、振幅扰动和群到时延迟的3-D灵敏度核函数,并对面波有限频率效应进行了讨论.分析结果显示:面波相位延迟的3-D灵敏度核函数同2-D体波走时的核函数形状类似,说明面波具有二维传播特性.对相速度数据而言,Fresnel带方法适用于低频面波的反演,射线方法适用于高频面波的反演,而对于中等频率的面波反演应采用有限频率方法.频率的商低是相对于所要取得的分辨率而言的.在反演地壳上地幔细结构方面,群频散数据更具有优越性;然而,群到时延迟核函数的极强的旁瓣可能使得反演变得不稳定.     

Stage-I fatigue crack studies in order to validate the dislocation-free zone model of fracture for bulk materials

Stage-I fatigue cracks are commonly described by the model of Bilby, Cottrell and Swinden (BCS model). However, since several experimental investigations have shown a dislocation-free zone (DFZ) in front of crack-tips, it is necessary to validate the new DFZ model and to examine the deviations to the BCS model. Therefore, the dislocation density distribution is derived from height profiles of slip lines in front of stage-I fatigue cracks in CMSX4® single crystals measured by contact-mode atomic force microscopy. This is possible, because the cracks are initiated at notches milled by focused ion beam technique directly on slip planes with a high Schmid factor. Consequently, the directions of the Burgers vectors are well known; it is possible to calculate the dislocation density distributions from the height profiles. The measured distributions are compared to the calculated distribution function of the DFZ model proposed by Chang et al. The additionally measured microscopic friction stress of the dislocations is then used to calculate the influence of grain boundaries on the dislocation density distribution in front of stage-I cracks. The calculation is done by the extended DFZ model of Shiue et al. and compared with the measured distribution function in polycrystalline specimens. Finally, the crack-tip sliding displacement as a measure for the crack propagation rate is compared for the DFZ model and the BCS model with the experimentally revealed values. The important result: the often used BCS model does not reflect the experimental measurements. On the contrary, the DFZ model reflects the measurements at stage-I cracks qualitatively and quantitatively.     

Capillary zone electrophoresis of proteins applying ionic liquids for dynamic coating and as background electrolyte component

The use of ionic liquids in capillary electrophoresis, either as coating material or as components of the background electrolyte needs systematic standardization to set up optimal conditions. Excellent separation of the proteins was achieved using 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF₄]) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) ionic liquids using the properly made ionic-liquid–water binary mixtures for the experiments. The binary mixture has a distinctly stable and well perceptible low pH, which depends on the concentration of the ionic liquid, and on the preparation time of the mixture. Optimal conditions for the electrophoretic separation were obtained upon a multivariate analysis of the experimental parameters (applied voltage, migration time, concentration, and type of the ionic liquid). The standardized condition provides a low electroendosmotic flow toward the anode, which, however, did not hinder the proteins to migrate toward the cathode. The migration of cytochrome c, lysozyme, myoglobin, trypsin, and apo-transferrin at a pH around 2, far below the isoelectric points of the proteins, showed RSD values of the migration times less than 7.5% and less than 6.5% when using [emim][BF₄] or [bmim][BF₄], respectively, either in run-to-run or day-to-day experiments. The determination of the extent of the EOF is not possible with the commonly used EOF markers, due to interaction with the ionic-liquid constituents. The interaction of the ionic liquids with the proteins influences the migration order in zone electrophoresis. This method has been applied successfully for the analyses of real biological samples such as proteins from egg whites and human tears.     

连续埋地管线沉陷情况下可靠度分析

场地的不均匀沉陷是埋地管线破坏的重要原因之一.运用均值一次二阶矩法和ANSYS中的蒙特卡罗法对埋地管线在地面沉陷位移、材料性能参数、内水压力等随机变量下的可靠度进行计算分析,得到考虑和不考虑管道内水压力时的可靠度系数和失效概率.结果表明,地面沉陷位移的变异性对沉陷区埋地管线的可靠度有着十分重要的影响,与不考虑管道内水压力作用的结果相比,考虑管道内水压力时的失效概率较大,可靠度系数较小;管道壁厚和直径的变异性对沉陷区埋地管线的可靠度也存在着不可忽视的影响.     

X100直缝埋弧焊管断裂韧性的裂纹尖端张开位移试验研究

为了检验X100直缝埋弧焊管的断裂韧性,采用三点弯曲多试样法,在室温、-10℃和-30℃下对该焊管的母材、热影响区和焊缝部位进行了裂纹尖端张开位移(CTOD)试验.测试结果表明:在同一温度下,CTOD试验的表观启裂值δ0.05、条件启裂值δi和最大载荷值δm的分布规律为母材最好,焊缝次之,热影响区最差;采用裂纹扩展阻力和撕裂模量表征的分布规律为母材最好,热影响区次之,焊缝最差;焊接热影响区组织中含有大量呈块状分布的铁素体,而粒状贝氏体等增强相的含量较少,这会造成其韧性下降,使焊管出现局部失稳现象.     

曹妃甸海域磷酸盐容量控制

首先,建立曹妃甸海域潮流和污染物输运数学模型,并用实测资料对模型进行验证;然后,应用验证好的数学模型,计算六种典型水文条件(洪季大、中、小潮,枯季大、中、小潮)下该海域8个河流排污口和曹妃甸围填区混合区半径上的磷酸盐浓度,并与功能区要求的水质标准进行比较分析;最后,计算出磷酸盐的允许排放量和削减率.结果表明:磷酸盐超标的枯季为陡河和沙河,洪季为双龙河和围填区,应加强对这些河流相应季节磷酸盐排放量的控制.     

基于托达罗模型的辽宁沿海经济带农村人力资源转移模式

运用托达罗基本分析模型分别从宏观和微观两个层面研究辽宁沿海经济带农村人力资源转移问题,分析农村人力资源状况、城乡收入差距、总体就业形势等因素以及教育水平、文化差异、心里舒适度等个人心理成本因素的影响.在托达罗分析模型的基础上,结合辽宁沿海经济带整体开发背景,提出坚持政府推动和市场主导相结合、增强城市吸纳能力和扩大在农业(农村)内部就业相结合的人力资源转移方向,构建辽宁沿海经济带农村人力资源转移的基本模式.