变频调速技术在细纱机恒张力控制中的应用

根据纱线长度，用变频器控制细纱机主轴转速，设计了纺纱过程中纱线恒张力控制．程序按照状态变化进行设计开发．实验结果表明，该设计达到设计要求．其产品已投入批量生产．     

The Yarn Curve and Tension in Rotor Spinning

The effective way of finding the yarn curve shape and tension of OE（open end） yarn inside the rotor is carried out and treated by dividing the yarn curve into two parts, from which the trajectory of the yarn sliding on the navel surface is also obtained. It is pointed out that the yarn curve shape and tension will both fluctuate with the trajectory＇s revolving cycle inside the rotor. However, the fluctuation is not too great, so the motion can still be regarded as approximately steady for dynamic analysis.     

两种不同形状旋转带对气液两相流场影响的计算流体力学模拟

利用计算流体力学软件FLUENT,以RNGk-ε湍流模型和Eulerian多相流模型对旋转带蒸馏设备内的流场进行了数值模拟.模拟考虑了旋转带的结构因素.结果表明,无开孔的旋转带在高速转动时,设备内的流体会产生界面分离现象,不利于气液两相的密切接触.而有开孔的旋转带在高速旋转时,会有效地改善流体界面的分离,而且气液两相的湍动程度更大,这些现象将有利于气液两相的传质.同时,比较了开孔位置和孔径大小对改善气液界面分离的影响.模拟结果为进一步研究旋转带蒸馏设备的结构优化和操作提供了理论依据.     

Analysis and Discussion of Fiber Motion in the Spinning Triangle of Ring Spinning

In order to analyze the effect of the spinning triangle on yarn structure,a shape model of the spinning triangle is established.The fiber motion in the spinning triangle can be divided into three stages,and the relationship between yarn structure and fiber duration as well as the force acting on the fibers in the three stages is analyzed.The fiber elongation in different location of the spinning triangle is variational.The difference is that the elongation of fiber in the middle spinning triangle is bigger than that in the edge of it and the difference will be amplified with the increase of spinning triangle width,which has an effect on the characteristic of yarns structure.Research results for further study on compact yarn structure and improving spinning frame structure provide theorybasis.     

纺粘法工艺及其产品应用初探

文章简述了纺粘法的工艺特性及发展状况，探讨了纺粘法产品的应用前景。     

男子铁饼出手速度及旋转技术剖析

本文通过中、外运动员的出手速度及旋转技术的分析、对比,探求我国男子铁饼成绩落后的原因,从而为铁饼的科学化训练提供一定的依据.     

预热处理对高相对分子质量聚乙烯增塑熔纺纤维拉伸性能的影响

高相对分子质量聚乙烯的增塑熔纺,由于聚合物浓度较高,大分子缠结多,纤维超拉伸比较困难,难以达到高强度。采用预热处理的方法,改善了纤维的拉伸行为和力学性能。经WAXD、SEW分析发现,预热处理后大分子网络相互靠近,使片晶厚化,晶粒尺寸变大,而纤维结晶度有所减小,有利于超倍拉伸的进行。这里最佳热处理温度为115～130℃,最佳热处理时间为3～10 min。     

武术套路中“旋风脚”动作的运动生物力学分析与训练

以运动生物力学方法 ,对我院高水平武术运动队学生及普体课选项武术学生练习武术套路中“旋风脚”动作进行分析 ,从而找出运动技术结构的规律 ,探索如何使运动技术动作达到最优化的原理及教学训练手段 .     

Sant’Andrea前纺设备的特性及其应用

介绍了引进圣安德烈一套前纺设备的特点、应用，讨论了生产中出现的问题及解决方法、工艺部件国产化、工艺改进方面等问题，从而更好地利用进口设备，提高毛纱质量