A scratch-resistant single-layer antireflective coating by a low temperature sol-gel route

A novel quarterwave-thick narrow-bandwidth antireflective coating has been developed for both plastic and vitreous substrates by a sol-gel route. This coating has revealed pronounced scratch- and climatic-resistance under adverse conditions. The single-layer coating consists basically of a composite material made of silica as the discontinuous phase and of a polytetrafluoroethylene-derived (Teflon¹) organic polymer as the continuous phase. This leads to fluorine-containing colloidal silica product, or a so-called Flucosil coating. The coating is applied by spinning or dipping from specific solutions at room temperature followed by a mild and short heat treatment. In addition to remarkable abrasion and environmental resistance properties, such coatings have displayed excellent laser-induced damage threshold levels, surpassing uncoated substrates.We hope such a product might open new perspectives concerning household articles, architectural optical thin-films, ophthalmic uses, and so on.     

Nanoporous TiO2 Coatings for Infrared Detectors

In GaAs based infrared detectors, a considerable part of the incident light will be reflected at the surface, thus it decreases the detectors sensitivity considerably. In this paper, a TiO₂ nanoporous coating was prepared successfully on the GaAs substrate by sol-gel method. The optical parameters of the coating were also controlled successfully. It was proved that the coating could greatly improve the transmittance of the incident light, which agrees with the theoretical results quite well. In the 2.5–6.0 m waveband, the maximum transmittance of GaAs substrate is 56%, while the transmittance of the GaAs substrate coated with a nanostructured TiO₂ coating is about 94%.     

A technique for coating capillary columns with a very thick film of cross-linked stationary phase

A method for preparation of capillary columns and traps with a very thick film (up to 100 μm) of stationary phase is described. The principle of this method is based on an immediate fixation of a film of prepolymer, formed during dynamic coating. Thus, the development of film irregularities, such as are caused by Rayleigh instability is avoided. Fixation of the film is conveniently accomplished by heat-accelerated crosslinking as was demonstrated in this work, where a commercially available silicone prepolymer (Sylgard 184, Dow Corning) was employed. The low phase ratio columns which thus can be prepared are interesting both in chromatography with dense mobile phases and as enrichment devices. Examples of the latter application are shown, where trace organic components from air and water were concentrated.     

SYNTHESIS, CROSSLINKING MECHANISM AND PROPERTIES OF A POLYACRYLATE/POLYURETHANE COMPOSITE COATING

A polyacrylate/polyurethane (P(A) / P(U)) composite coating has been prepared bycrosslinking an acetoacetylated polyacrylate with a vinylic group terminated polyurethaneat room temperature. A model Michael reaction between ethyl acetoacetate (EAA) andmethyl acrylate (MA) was designed to study the crosslinking mechanism. It was foundthat the two active hydrogen atoms in acetoacetyl group can both add to vinylic groupsand the yield of mono- and bis-adducts are much affected by the molar ratio of acetoacetylto vinylic groups. Higher crosslinking degree and better properties could be obtained withdecreasing the molar ratio of the two active groups from 1/1 to 0.6/1 in the compositecoatings.     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

涂层对热电偶热电性能及大气中寿命的影响

在难熔金属热电偶表而施加涂层的目的,旨在使原仅限和真空、中性及还原气氛中测量的热电偶能在大气中使用.本文讨论涂层对难熔金属热电偶在氧化气氛的"热电势—温度","热电势—时间"的关系及其寿命的影响.具有涂层的W/M.热电偶在氧化气氛(常压下1500℃取得263小时±1%t的最高记录,而W-Re热电偶存1500℃试验的前70小时偏差也在1%t内.而没有涂层的热电偶仅支持数分钟便破坏.     

A rigorous control of logarithmic corrections in four-dimensional ϕ4 spin systems

Using Gawedzki and Kupiainen's rigorous block spin transformation method, we study critical phenomena in ⁴ spin systems in four dimensions. In Part I of this work we investigate in detail the renormalization group trajectory of the system not exactly at the critical point.     

On the existence of thermodynamics for the generalized random energy model

Derrida's generalized random energy model is considered. Almost sure andL ^p convergence of the free energy at any inverse temperature are proven for an arbitrary numbern of hierarchical levels. The explicit form of the free energy is given in the most general case and the limitn is discussed.