狄拉克方程的单旋量解法以及由此引起的认识上的差异

把狄拉克方程分解成了两个单旋量的联立方程组．指出现行的自旋理论仅考虑了其中的一个方程，是以一个单旋量代替双旋量来描述状态而建立起来的．笔者在认同现行自旋理论可以作为狄拉克方程的一种求解方法，因而同意其中的某些提法外，对于其主要的物理观念：微观粒子存在着独立于现实的位形空间之外的一个自旋空间，在这个自旋空间内禀着角动量S和磁矩μ；这个自旋理论是相对论性量子力学导出的必然结论等等看法予以否定．笔者认为，只有同时考虑两个单旋量的方程，同时计及两个单旋量，才能准确地描述状态，从而正确地描述客观规律．     

Magnetoresistance of Fe3O4/Au/Fe3O4 and Fe3O4/Au/Fe spin-valve structures

A detailed study of the in-plane magnetotransport properties of spin valves with one and two Fe₃O₄ electrodes is presented. Fe₃O₄/Au/Fe₃O₄ spin valves exhibit a clear anisotropic magnetoresistance in small magnetic fields but no giant magnetoresistance (GMR). The absence of GMR in these structures is due to simultaneous magnetization reversal in the two Fe₃O₄ layers. By contrast, a negative GMR effect is measured on Fe₃O₄/Au/Fe spin valves. The negative GMR is attributed to an electron spin scattering asymmetry at the Fe₃O₄/Au interface or an induced spin scattering asymmetry in the Au interfacial layers.     

氘代聚合物膜靶制备技术与性能研究

 氘代聚合物膜是快点火基础物理实验的一种重要靶型。通过氘代苯乙烯单体的本体自由基聚合反应制备氘代聚苯乙烯，并利用流延法和浇铸法制备出厚度从几十nm到数百μm的膜靶。溶剂挥发过程中的随机扰动对膜厚均匀性造成影响，采用清洁的基片和在涂沫基片或模具外加防护罩可以降低这种影响。采用PVA作脱膜剂有利于获得较薄的聚合物薄膜。DSC分析表明薄膜的玻璃化转变温度与热处理过程有关，缓慢退火有利于提高Ｔ-g和储能模量。     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

热喷涂技术的现状和发展

介绍了热喷涂工艺的特点，喷涂方法的种类及其技术以及热喷涂技术的应用概况，并对热喷涂技术的发展方向给予了展望。     

Measurement of Hartmann-Hahn cross-polarization dynamics with quenching of proton T1ρ relaxation dependence

A simple modification of the standard cross-polarization method designed for quenching the proton T_1ρ dependence when studying polarization transfer is presented. It is demonstrated that by using this simple procedure, new and subtle details of cross-polarization dynamics, previously hidden by the T_1ρ(¹H) effect, can be observed in dipolar-coupled spin systems.     

Breathers in ferrimagnetic systems

Breathers in discrete nonlinear ferrimagnetic spin lattices are investigated for both easy-axis and easy-plane configurations. The region in frequency space of the formation of breathers is determined and the anticontinuum limit discussed. The monochromatic and the coloured breathers are found out numerically for different parameters and different conditions of excitations.     

HL—1装置SiC涂层辐照实验的表面分析

本文应用表面分析技术研究HL-1装置中SiC涂层的等离子体辐照性能。结果表明,SiC材料应用于孔栏和壁涂层有利于减少杂质和提高等离子体品质。     

Magnetization and Specific Heat of UCo0.95T0.05Al (T = Fe, Ni) Single Crystals

We present the first single-crystal study of Fe and Ni doped U(Co_1-x T _x )Al compounds in comparison to the parent compound, the itinerant 5f-electron metamagnet UCoAl. Magnetization and specific-heat data measured in the temperature range of (1.8-300) K and in fields up to 10 T are analyzed and discussed. Both compounds exhibit a strong uniaxial anisotropy with the dominating magnetic response along the c-axis of the hexagonal ZrNiAl-type structure. Ni substitution yields an increase of the critical field for metamagnetism; UCo_0.95Fe_0.05Al is ferromagnetic below 30 K. Temperature evolution of the entropy change between 0 and 10 T points to involvement of magnetic correlations or spin fluctuations in the paramagnetic compounds UCoAl and UCo_0.95Ni_0.05Al.     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007