光学薄膜在现代汽车工业中的应用

本文论述应用光学薄膜技术对汽车窗口玻璃和塑料的若干性能进行改进的技术发展水平，这些性能包括塑料表面的硬化，红外区的反射，紫外区的吸收，偏振化作用，双折射，憎水性以及光学角度选择性等，评论等离子体处理和物理蒸汽淀积薄膜工艺近来应用的一些例子。对于物理蒸汽淀积薄膜所提供的异常功能连同实际使用中它们的耐久性作了特殊的强调。     

中能区反质子与原子核散射的极化度

在已获得的中能区反质子与核的中心势的光学势基础上,把光学势扩大到包含自旋轨道耦合势.在反质子能量为179.8,294.8和508MeV各情况下,分别计算和分析与~(12)C靶核的微分截面(dσ)/(dΩ),极化度P(θ)和自旋转动函数Q(θ).在与极化度的实验比较中,得到中能区普遍形式的反质子光学势.     

Exact ground state of the generalized three-dimensional Shastry-Sutherland model

We generalize the Shastry-Sutherland model to three dimensions. By representing the model as a sum of the semidefinite positive projection operators, we exactly prove that the model has exact dimer ground state. Several schemes for constructing the three-dimensional Shastry-Sutherland model are proposed. Received 20 February 2002 / Received in final form 27 May 2002 Published online 17 September 2002     

塑料光学元件的清洗、镀膜和胶合

各种塑料光学元件在光学系统中的应用越来越广泛。作为光学元件,必然涉及清洗、镀膜和胶合等工艺技术问题。本文就塑料光学元件的这三个技术作一介绍。     

磁畴形成的原理探索

本文运用量子力学和固体物理学分析铁磁物质及其磁畴形成的原理     

Charge order and spin order in Nd_(0.5)Sr_(0.5)Mn_(1-x)(Ga_x, Ti_x)O_3 system

Magnetic properties of Nd_(0.5)Sr_(0.5)Mn_(1-x)(Ga_x, Ti_x)O_3 system (0.04≤x≤0.4) were inves- tigated through magnetization and electron spin resonance (ESR) measurements. It was observed that a small amount of Ti substitution for Mn will destroy the charge-ordering (CO) phase completely and induce the cluster-spin-glass phase in the system, which displays a procedure of collapse of CO and of an enhancement of spin ordering (SO) phase. In contrast, the Ga substitution for Mn induces a melt- ing of CO phase in the system. It was observed that with substitution the CO phase is suppressed gradually and the remanent CO phase is retained all the while, and withal, there is a co-existence of AFM CO phase and FM SO at low temperature. In addition, an abrupt rise of magnetization was observed in M-T curves. We attributed this abnormal phenomenon to a transition from canted AFM SO to FM SO in CO region.     

Preparation and microwave absorption properties of electroless Co-Ni-P coated strontium ferrite powder

A new type of Co-Ni-P coated strontium ferrite nanocomposite was prepared with electroless plating enhanced by ultrasonic wave at room temperature. The plating process was studied carefully. The morphology, crystal structure and microwave absorption properties of the Co-Ni-P coated powder were studied with field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), energy dispersive analysis of X-rays (EDX) and vector network analyzer. The results show that the strontium ferrite powder was successfully coated with Co-Ni-P alloy and possesses excellent microwave absorption properties. The maximum microwave loss of the composite powder reaches −44.12 dB. The bandwidth with the loss above −10 dB exceeds 13.8 GHz.     

UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

The Nature of Electronic Charge

Advances in gauge theories and unified theories have not thrown light on the meaning of electron. The problem of the origin of electronic charge is made precise, new insights gained from Weyl space are summarized, and the origin of charge in terms of fractional spin is suggested. A new perspective on the abelian Chern-Simons theory is presented to explain charge.     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -