电子直线加速器磁控管频率稳定的自适应线性神经元方法

 电子直线加速器电子束能量的稳定与否取决于功率源工作频率的稳定性,磁控管在短时间内的散谱和轻微跳谱造成稳频系统的控制精度下降,最后电子束的扫描均匀度下降。引入自适应线性神经元方法(ADALINE)和噪声对消技术以消除对工作频率长期稳定性的影响,从而保证了电子束的扫描均匀度。     

Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

一类混沌系统的自适应模糊控制器设计

通过混沌系统的形式的抽象，提出了一种间接自适应模糊控制方法来控制一类具有未知非线性函数的混沌系统跟踪一参考轨迹．     

Fuzzy Model of Regional Economic Competitiveness in GIS Spatial Analysis: Case Study of Gansu, Western China

After more than 20 years of impressive development since the economic reforms in 1978, today western China is facing an increasing development gap between its regions, particularly between urban and rural areas. Using the fuzzy comprehensive evaluation model, this paper aims to demonstrate the evolution of the economic competitiveness levels base on two categories of geographical unity in the province of Gansu located in Northwest China between 2000 and 2004. The results of fuzzy modeling are integrated into GIS spatiotemporal analyses in order to identify the spatial variation of each significant change in terms of the regional economic development. Our research effectively illustrates that there is a particular spatial dynamic of the economic development from region to region. Although the cities have improved very well in their economic competitiveness, the rural areas and minority regions still have a lot of progress to be achieved.     

基于DEM的山地可照时间的空间分布

以山区高空间分辨率的DEM数据为主要数据源，在提取纬度、坡度、坡向等相应的地形要素栅格数据的基础上，利用GIS技术对山区可照时间的空间分布进行了模拟，实现了山区可照时间空间分布规律的可视化表达，分析了山区可照时间的空间分布特征，对于山区的农业、林业和生态环境等方面的研究具有重要意义．     

核磁共振成像一维空间编码教学实验

利用梯度磁场实现检测信号的空间编码,是核磁共振成像(MRI)的关键技术.本文采用ccc系列样品将二维问题简化为一维,使用超小型教学用核磁共振成像仪进行了一维空间编码实验研究,并对实验过程及实验结果进行了计算模拟和分析.     

Optical modulation and digital demodulation of an in-plane moiré carrier

A rotational mismatch of gratings is used to generate a fringe carrier of an in-plane moiré pattern so that specimen deformation shows itself in the form of modulation of the carrier frequency. As both the unmodulated and modulated carriers are the patterns without fringe-loop or fringe-connection, they are automatically numbered with monotonical increasing orders by a digital image processing system without any ambiguity. The orders at every pixel of the image are determined by interpolation of the orders of the tracked fringes to establish two grey image files, from the difference of which, the orders of the in-plane displacement moiré are displayed with grey-level variation.     

基于模糊神经网络的自适应PID控制器

提出了一种应用于自适应PID控制器的神经网络与模糊控制相结合的算法,该算法可以有效地解决普通PID控制器依赖于对象的数学模型的缺点,可实现控制系统的在线自适应调整,可满足实时控制的要求。仿真结果表明,基于模糊神经网络整定的PID控制器具有较好的自学习和自适应性,具有较快的响应速度。     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

Numerical differentiation from a viewpoint of regularization theory

In this paper, we discuss the classical ill-posed problem of numerical differentiation, assuming that the smoothness of the function to be differentiated is unknown. Using recent results on adaptive regularization of general ill-posed problems, we propose new rules for the choice of the stepsize in the finite-difference methods, and for the regularization parameter choice in numerical differentiation regularized by the iterated Tikhonov method. These methods are shown to be effective for the differentiation of noisy functions, and the order-optimal convergence results for them are proved.