3D simulation of the effects of growth parameters on the growth of sapphire crystals using heat exchanger method

3D simulations using the commercial CFDRC and FIDAP code, which are based on finite element techniques, were performed to investigate the effects of anisotropic conductivity on the convexity of the melt–crystal interface and the hot spots of sapphire crystal in a heat‐exchanger‐method crystal growth system. The convection boundary conditions of both the energy input to the crucible by the radiation as well as convection inside the furnace and the energy output through the heat exchanger are modeled. The cross‐sectional flow pattern and the shape of the melt–crystal interface are confirmed by comparing the 3‐D modeling results with previous 2D simulation results. In the 3D model, the “hot spots” in the corners of the crucible are donut shaped, and the shape changes with the value of the conductivity of anisotropic crystal. The outline of the crystal becomes more convex as the conductivity in the z direction (k_sz) increases. The outline of melt–crystal interface is elliptical when the anisotropic conductivity is moving in the radial direction (k_sx and k_sy). The portion at the outline touching the bottom of the crucible is smaller than the maximum outline of the crystal, meaning that the shape at the “hot spot”, changes with the value of the conductivities of anisotropic crystal. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…     

悬浮固化-分散液液微萃取-液相色谱-串联质谱测定纺织废水中磷系阻燃剂

建立了悬浮固化-分散液液微萃取结合液相色谱-串联质谱测定纺织废水中5种痕量磷系阻燃剂的方法。通过对萃取过程中萃取剂、分散剂的种类与体积、盐浓度、溶液pH值等对萃取效率的影响因素优化,确立了最佳萃取条件。采用了密度小于水的十一烷醇(400μL)为萃取剂,甲醇(300μL)为分散剂,控制溶液pH值在6～9之间,NaCl添加量为2 g,萃取时间为涡旋2 min。在优化的萃取条件下,该方法在2～100μg/L均有良好的线性关系,相关系数大于0.995,除二(2,3-二溴丙基)磷酸酯(BIS)的检出限为5μg/L外,三(2-氯乙基)磷酸酯(TCEP)、三(1,3-二氯-异丙基)磷酸酯(TDCP)、三(1-氮丙啶基)氧化膦(TEPA)和三(2,3-二溴丙基)磷酸酯(TRIS)的检出限均为2μg/L。后整理、染色和印花等实际废水样品加标试验表明,方法的平均回收率为71.6%～114.5%, RSD为2.7%～11.2%(n=6)。对11个样品进行检测,其中3个废水样品检出TCEP与TDCP化合物,含量为2.6～3.4μg/L。本方法简单,快速,灵敏度好且环保绿色,能够对纺织废水中的5种痕量磷系阻燃剂...     

Ligandless,deep eutectic solvent‐based ultrasound‐assisted dispersive liquid‐liquid microextraction with solidification of the aqueous phase for preconcentration of lead,cadmium, cobalt and nickel in water samples

A green and efficient sample preparation method using a deep eutectic solvent‐based ultrasounds‐assisted dispersive liquid–liquid microextraction with solidification of the aqueous phase followed by high performance liquid chromatography analysis was developed for preconcentration and determination of heavy metals in environmental samples. In the proposed method, a novel, low density deep eutectic solvent was prepared by mixing trihexyl(tetradecyl)phosphonium chloride and thiosalicylic acid at a molar ratio of 1:2 and used both as an extractant and complexing agent. Ultrasound was used to disperse the extractant in the aqueous phase of the sample. Then, the phases were separated by centrifugation, after which the aqueous phase was frozen and the surface extractant phase was dissolved in a small volume of acetonitrile and subjected to liquid chromatographic analysis. The proposed method provided precisions (relative standard deviation, n = 5) in the range of 2.6–4.7%. The limit of detection were 0.05, 0.13, 0.06, and 0.11 µg/L for Pb(II), Cd(II), Co(II), Ni(II), respectively. The enhancement factors were equal to 154, 159, 162, and 158 for lead(II), cadmium(II), cobalt(II), and nickel(II), respectively. The accuracy of the proposed method was evaluated using certified reference materials (CA011b – hard drinking water, NIST 1643e – trace elements in water, TMRAIN‐04 – simulated rain sample).     

Effervescent tablet‐assisted demulsified dispersive liquid–liquid microextraction based on solidification of floating organic droplet for determination of methadone in water and biological samples prior to GC‐flame ionization and GC‐MS

A novel effervescent tablet‐assisted demulsified dispersive liquid–liquid microextraction based on the solidification of floating organic droplet was developed to determine methadone prior to gas chromatography with flame ionization detection and gas chromatography with mass spectrometry. In this method, a tablet composed of citric acid, sodium carbonate, and 1‐undecanol was utilized. The resulting effervescent tablet generated carbon dioxide in situ to disperse 1‐undecanol in the sample. Thus, the dispersive and extraction processes were performed in one synchronous step. An aliquot of acetonitrile as the demulsifier solvent was used for the separation of two phases instead of centrifugation. Under optimal conditions, the developed method was linear up to 50 000 µg/L with correlation coefficients higher than 0.99. Moreover, limits of detection and limits of the quantification were in the range of 3‐10  and 7‐30 µg/L in water and biological samples, respectively. Intra‐ and interday precisions (n = 6) of the spiked methadone at a concentration level of 50 µg/L were over ranges of 5.1‐6.8% and 5.7‐7.1%, respectively. The preconcentration factors and recovery values were obtained in the range of 140‐145 and 98.1 to 101.6% in real samples, respectively.     

Differential scanning calorimetry and the advanced solidification processing of metals and alloys

This paper describes some examples of the use of differential scanning calorimetry (DSC) in providing information for advanced solidification processing of metals and alloys. Spray forming, squeeze casting, grain refinement and crystallization of amorphous alloys are all discussed. DSC measurements are shown to be valuable for testing kinetic theories of nucleation and growth, and validating solidification process models.     

往复挤压准晶增强快速凝固Mg92.5Zn6.4Y1.1合金

采用往复挤压工艺将快速凝固Mg92.5Zn6.4Y1.1合金薄带在330℃挤压2道次和4道次,然后正挤压制成Φ10 mm的棒材。用OM,TEM,XRD及DTA研究了往复挤压过程中准晶相I-Mg3YZn6弥散析出及对力学性能的影响。研究表明,往复挤压有利于快速凝固Mg92.5Zn6.4Y1.1合金薄带的焊合,获得组织致密、均匀、高强韧合金。往复挤压2道次,相组成为-αMg和准晶I-Mg3YZn6,脱溶析出纳米准晶相较少;4道次相组成为-αMg和准晶I-Mg3YZn6及MgZn相,脱溶弥散析出的纳米I-Mg3YZn6准晶相及MgZn相较多。往复挤压提高材料的拉伸性能,其主要原因是细晶强化和析出强化。     

生石灰激发赤泥-粉煤灰协同水泥固化Cu2+污染高岭土的电化学特性

采用生石灰激发赤泥-粉煤灰-水泥对Cu2+污染高岭土进行固化处理,对采用不同配比的赤泥和粉煤灰固化7 d后的Cu2+污染高岭土试件的无侧限抗压强度、浸出率和电化学阻抗谱进行测试.试验结果表明,当赤泥和粉煤灰质量比为7:3时,固化体的无侧限抗压强度最大,Cu2+浸出率最小,电化学阻抗谱法对固化效果的评价与强度和浸出率测试...     

CSP结晶器内钢液流动及凝固的数值模拟

应用数值模拟方法,建立CSP漏斗型结晶器内钢液流动及凝固传热耦合模型。针对结晶器内铸坯角部受到强冷的特点,对结晶器内热流密度采用修正方程进行计算,分析热流密度修正系数对铸坯凝固坯壳表面温度计算精度的影响。通过比较不同拉坯速率下结晶器内钢液凝固的特点,研究凝固坯壳对结晶器内钢液流动行为的影响。结果表明,采用热流密度修正系数后,铸坯凝固坯壳角部温度的计算值与实际情况更相符;提高拉坯速率可使铸坯凝固坯壳厚度减小;拉坯速率较大时凝固坯壳厚度随铸坯距弯月面距离的增大基本呈线性增长,拉坯速率为3m/min时,凝固坯壳在生长过程中厚度的增长有短暂的停滞现象;凝固坯壳对钢液流动的影响较大,主要是由钢液有效流动区域减少及两相区额外动量阻损造成的。     

考虑气隙的电磁连铸圆坯传热凝固数值模拟

通过双向迭代耦合的方法,建立了电磁连铸结晶器区域内的传热凝固有限元分析模型.通过对凝固坯壳与结晶器接触状态的数学描述,来模拟软接触结晶器内的热和力学状态,研究了高频交变电磁场对气隙分布及铸坯温度场的作用规律.结果表明,采用双向迭代耦合的方法,可更准确地描述电磁软接触连铸结晶器内的热-力学行为;高频交变磁场下,钢液的初始凝固点位置较常规连铸下移,初始凝固壳减薄,气隙生长延迟;在结晶器下段,由于电磁力的搅拌作用凝壳厚度又有所增加,气隙量大于常规连铸.