磁性固体超强酸SO42-/ZrO2-Al2O3-Fe3O4的制备与性能研究

利用化学共沉淀法将磁性基质与固体酸组装制备磁性纳米固体超强酸催化剂，利用XRD、Raman、TG-DSC、M?ssbauer、TEM、HRTEM等手段对样品性质进行表征。结果表明：磁性基质的引入赋予固体超强酸以超顺磁性；Fe₃O₄、Al₂O₃粒子弥散在ZrO₂基质中，烧结过程中阻碍了扩散传质的进行以及晶界移动，抑制了ZrO₂晶体生长，稳定了四方晶相(T-ZrO₂)；样品粒径分布集中，平均约为32 nm；HRTEM显示T-ZrO₂晶体生长取向于(101)方向，晶面间距d(101)=0.29 nm；Hammett指示剂法测得经600 ℃焙烧后产物的酸强度H_o＜-13.8，酸强度大于浓硫酸(H_o=-11.93)。以柠檬酸三丁酯的合成作为磁性固体超强酸SO₄^2-/ZrO₂-Al₂O₃-Fe₃O₄催化剂的探针反应，结果表明外磁场的引入提高了柠檬酸的转化率。     

Preparation of Ce-Zr-O solid solution

A single phase solid solution of Ce-Zr-O can be made by using NH₄HCO₃ solution as precipitating agent. The influence of preparation conditions, such as pH, Zr⁴⁺/(CO₃ ^2-+HCO₃ ^-) and Ce³⁺/Zr⁴⁺ ratio on the formation of the solid solution were investigated. The results show that a single phase Ce-Zr-O solid solution can be formed only under a narrow window of preparation conditions, indicating that some compounds are formed in the precipitating process. The compound may contain Ce³⁺, Zr⁴⁺, CO₃ ^2-, HCO^3-, and OH^-. The solid solution so prepared can be described as Ce_0.37Zr_0.63O₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preparation and characterization of nitrogen-doped TiO2 photocatalyst in different acid environments

Nitrogen-doped TiO₂ powders were successfully prepared by a wet method, i.e., a micro-emulsion-hydrothermal method, in different acid environments. Several characterization techniques, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance spectra, were combined to determine the crystal phase, concentration and chemical states of the nitrogen doped in TiO₂. The high photocatalytic activity of the nitrogen-doped TiO₂ was evaluated through the decomposition of rhodanmine B under visible light irradiation. It was suggested that the doped nitrogen formed oxynitride (NO) and produced impurity states at higher above the valence band of TiO₂. Therefore, the nitrogen doping could enhance the response of photocatalyst to the visible light and improve the photocatalytic activity because of the narrowing of band gap of TiO₂.     

固相萃取-气相色谱-质谱分析肉样中盐酸克伦特罗的残留量

建立了固相萃取 气相色谱 质谱联机分析肉样中盐酸克伦特罗残留量的方法。对盐酸克伦特罗在C1 8和离子交换固相萃取柱上的保留行为进行了研究 ,发现不同浓度盐酸克伦特罗的固相萃取回收率在 75 %～ 95 %之间 ;肉样中的加标回收率在 70 %～ 83 % ;相对标准偏差在 4 .95 %～ 1 3 .4 % ;最低检出限为 1 μg kg。盐酸克伦特罗的硅烷化产物 ,采用选择离子的模式进行检测 ( 86、2 4 3、2 62、2 77) ,衍生物的峰面积与样品浓度在0 .0 0 2 5 2～ 2 .0 2mg L范围内呈良好的线性关系 ,线性回归系数大于 0 .9999。     

TiO2光催化反应及其在环境保护中的应用

本文简要介绍了TiO2光催化剂的作用机理，讨论了影响TiO2光催化效率的因素及解决途径，综述了光催化在环境保护中的最新应用。     

Photocatalytic Properties of Titanium Dioxide Heterostructures with Cyanine Dyes and Polyepoxy Propylcarbazole

We have obtained novel photosensitive materials containing a semiconductor photocatalyst and a dye sensitizer. We have studied the activity of the latter in the reaction of photoreduction of methylene blue, and we consider possible mechanisms for the photocatalytic effect.     

Mesoporous electrode material from alumina-stabilized anatase TiO2 for lithium ion batteries

A mesoporous electrode material whose structure is composed of anatase nanocrystals stabilized by alumina is reported. Powder X-ray diffraction shows the anatase phase only, but micro-Raman spectroscopy shows that the materials have a core-shell morphology with grains of bulk anatase covered by a thin rutile layer on the surface. This structure is unique when compared to analogous materials stabilized by zirconia (PNNL-1). Nitrogen adsorption isotherms demonstrate a monotonous increase in surface area and mesopore volume with increasing Al content. Thin film electrodes from these materials were characterized by lithium insertion electrochemistry. Cyclic voltammograms exhibit significant differences in Li accommodation in Al-free and Al-stabilized materials.     

The effect of sampling conditions on the thermal decomposition of electrolytic manganese dioxide

The effect of sampling conditions on the decomposition of electrolytic manganese dioxide using thermal methods is reported. Significant differences were observed in the mechanism of the decomposition by simply changing the reaction environment from a closed pan to an open pan configuration. The purge gas atmosphere was also observed to influence the decomposition mechanism. As a product of the decomposition is oxygen, the change in the mechanism observed between the experimental conditions may be explained in terms of the ease of removal of oxygen from the reaction site. This revised version was published online in August 2006 with corrections to the Cover Date.