Effect of oblique incidence angle of sunlight on the optimized folding angle of V-shaped organic solar cells

We numerically investigate the effect of the incidence angle of sunlight on the optimized folding angle of V-shaped organic solar cells (VOSCs) to obtain the best power conversion efficiency in a realistically operating environment. The light absorbance at the active layer is calculated based on the finite element method with respect to the incidence angle of sunlight and the folding angle of the VOSC. We calculate the generation energy density per day at each folding angle by integrating the angular response of the short-circuit current and the open-circuit voltage with the consideration of the variation of the incidence angle during daytime. We show that the optimized folding angle of the VOSC based on the variation of the generation energy density per day is close to that determined from the variation of the electric power density in normal incidence, which has been widely used to optimize the folding angle of VOSCs.     

Investigation of the electrical and optical properties of InAs/InGaAs dot in a well solar cell

The electroreflectance (ER) and current–voltage (J–V) of InAs/InGaAs dots in a well (DWELL) solar cell (SC) were measured to examine the optical and electrical properties. To investigate the carrier capturing and escaping effects in the quantum dot (QD) states the above and below optical biases of the GaAs band gap were used. In the reverse bias region of the J–V curve, the tunneling effect in the QD states was observed at low temperature. The ideality factors (n) were calculated from the J–V curves taken from various optical bias intensities (I_ex). The changes in the ideality factor (n) and short circuit current (J_SC) were attributed mainly to carrier capture at low temperature, whereas the carrier escaping effect was dominant at room temperature. ER measurements revealed a decrease in the junction electric field (F_J) due to the photovoltaic effect, which was independent of the optical bias source at the same temperature. At low temperature, the reduction of photovoltaic effect could be explained by the enhancement carrier capturing effect due to the strong carrier confinement in QDs.     

ITO-free inverted organic solar cells fabricated with transparent and low resistance ZnO/Ag/ZnO multilayer electrode

Inverted organic solar cells (OSCs) based on poly (3-hexylthiophene) (P3HT):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) bulk heterojunctions (BHJ) were fabricated with optimized ZnO/Ag/ZnO multilayer and conventional indium–tin oxide (ITO) cathode electrodes and their performance was compared. The ZnO/Ag/ZnO multilayer films showed sheet resistances in the range 3.6–3.9 Ω/sq, while ITO exhibited 14.2 Ω/sq. On the one hand, the carrier concentration gradually decreased from 1.74 × 10²² to 4.33 × 10²¹ cm⁻³ as the ZnO thickness increased from 8 to 80 nm, respectively. The transmittance of the ZnO(40 nm)/Ag(19 nm)/ZnO(40 nm) films was ∼95% at 550 nm, which is comparable to that of ITO (∼96%). The multilayer films were smooth with a root mean square (RMS) roughness of 0.81 nm. OSCs fabricated with the ZnO(40 nm)/Ag(19 nm)/ZnO(40 nm) film showed a power conversion efficiency (2.63%) comparable to that of OSCs with a conventional ITO cathode (2.71%).     

Prototype electrochromic device and dye sensitized solar cell using spray deposited undoped and ‘Li’ doped V2O5 thin film electrodes

Lithium (Li) (0–5 wt%) doped V₂O₅ thin films were spray deposited at 450 °C onto ITO substrates. Structural analysis using X-ray diffraction and Raman spectroscopy revealed orthorhombic phase of the films. In addition to the V₂O₅ phase, presence of VO₂ peaks due to high deposition temperature is also evident from structural and optical characterization. The non-stoichiometric nature of the films due to loss of the terminal O atom was confirmed from Raman spectroscopy. The direct band gap, indirect bandgap, and phonon energies were also calculated from optical studies. Different charge states of vanadium ions present in the film were identified from X-ray photoelectron spectroscopy study. Results from cyclic voltammetry experiments reflected significant differences between the undoped and Li doped V₂O₅ samples. Transport properties by Hall-effect measured at room temperature indicated significant increase in conductivity, carrier concentration and mobility of V₂O₅ thin films on doping with Li. A Dye Sensitized Solar Cell (DSSC) was fabricated using mobility enhanced 5 wt% Li doped V₂O₅ film as photoanode and its efficiency was found to be 2.7%. A simple electrochromic cell is fabricated using undoped V₂O₅ thin film to demonstrate the colour change.     

Design and synthesis of pyromellitic diimide‐based donor–acceptor conjugated polymers for photovoltaic application

Three of conjugated polymers based on pyromellitic diimide (PMDI) as the acceptor unit and thienothiophene (TT) as the donor unit were successfully synthesized by Stille coupling. The effect of the side chain length and thiophene π‐bridge on the polymers' optical and electrochemical properties was investigated. Electrochemical characterization indicated that these polymers have deep highest occupied molecular orbital energy levels between ?5.7 and ?5.8 eV. Polymer solar cells were fabricated by using these PMDI‐based polymers as the donor and [6,6]‐phenyl‐C61‐butyric acid methyl ester as the acceptor. The polymer P1 whose PMDI unit was functionalized with 2‐ethylhexyl side chain shows the higher short‐circuit current (J_sc) and fill factor (FF) compared with that of P2 with a 2‐octyldodecyl side chain on the PMDI unit. The results also illustrate that the insertion of a thiophene π‐bridge between PMDI and TT (the polymer P3) leads to the broader absorption and better photovoltaic performance. The best performance was obtained from the cell based on the polymer P3 with a power conversion efficiency of 0.43% under the illumination of AM 1.5 G, 100 mW/cm². Copyright © 2014 John Wiley & Sons, Ltd.     

Mapping of the Photoinduced Electron Traps in TiO2 by Picosecond X‐ray Absorption Spectroscopy

Titanium dioxide (TiO₂) is the most popular material for applications in solar‐energy conversion and photocatalysis, both of which rely on the creation, transport, and trapping of charges (holes and electrons). The nature and lifetime of electron traps at room temperature have so far not been elucidated. Herein, we use picosecond X‐ray absorption spectroscopy at the Ti K‐edge and the Ru L₃‐edge to address this issue for photoexcited bare and N719‐dye‐sensitized anatase and amorphous TiO₂ nanoparticles. Our results show that 100 ps after photoexcitation, the electrons are trapped deep in the defect‐rich surface shell in the case of anatase TiO₂, whereas they are inside the bulk in the case of amorphous TiO₂. In the case of dye‐sensitized anatase or amorphous TiO₂, the electrons are trapped at the outer surface. Only two traps were identified in all cases, with lifetimes in the range of nanoseconds to tens of nanoseconds.     

Molecular Engineering of Push–Pull Porphyrin Dyes for Highly Efficient Dye‐Sensitized Solar Cells: The Role of Benzene Spacers

Porphyrins have drawn much attention as sensitizers owing to the large absorption coefficients of their Soret and Q bands in the visible region. In a donor and acceptor zinc porphyrin we applied a new strategy of introducing 2,1,3‐benzothiadiazole (BTD) as a π‐conjugated linker between the anchoring group and the porphyrin chromophore to broaden the absorption spectra to fill the valley between the Soret and Q bands. With this novel approach, we observed 12.75 % power‐conversion efficiency under simulated one‐sun illumination (AM1.5G, 100 mW cm^?2). In this study, we showed the importance of introducing the phenyl group as a spacer between the BTD and the zinc porphyrin in achieving high power‐conversion efficiencies. Time‐resolved fluorescence, transient‐photocurrent‐decay, and transient‐photovoltage‐decay measurements were employed to determine the electron‐injection dynamics and the lifetime of the photogenerated charge carriers.     

Synthesis and Characterization of Ag8(Ge1−x,Snx)(S6−y,Sey) Colloidal Nanocrystals

A facile colloidal approach to synthesize Ag₈(Ge_1?x,Sn_x)(S_6?y,Se_y) nanocrystals (NCs) in a highly controlled way across the entire compositional ranges (0≤x≤1, 0≤y≤6) has been developed. The NCs exhibit a uniform size distribution, highly crystalline structure, over 1 g scalable synthesis, and tunable band gaps in the range of 0.88–1.45 eV by varying their chemical compositions. The Ag₈GeS₆ NCs with a band gap of approximately 1.45 eV were employed as a model light harvester to assess their applicability in solar cells by a full solution‐processing device, yielding an efficiency of 0.28 % under AM1.5 illumination, demonstrating their application potential in solar energy utilization.     

Peripherally and Axially Carboxylic Acid Substituted Subphthalocyanines for Dye‐Sensitized Solar Cells

A series of subphthalocyanines (SubPcs) bearing a carboxylic acid group either at the peripheral or axial position have been designed and synthesized to investigate the influence of the COOH group positions on the dye‐sensitized solar cell (DSSC) performance. The DSSC devices based on SubPcs with axially substituted carboxylic acid groups showed low photovoltaic performance, whereas peripherally substituted one exhibited higher power conversion efficiency owing to improved injection from LUMO of SubPcs to the TiO₂ conduction band.     

Semiconductor and Metallic Core–Shell Nanostructures: Synthesis and Applications in Solar Cells and Catalysis

Nano‐heterostructures have attracted great attention due to their extraordinary properties beyond those of their single‐component counterparts. This review focuses on a specific type of hybrid structures: core–shell structures. In particular, we present and discuss the recent wet‐chemical synthesis approaches for semiconductor and metallic core–shell nanostructures, and their relevant properties and potential applications in photovoltaics and catalysis, respectively.