掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Electronic spectra of cationic forms of meso-tetrapropylporphin in a nanoporous silicate gel matrix

We have studied the fluorescence and fluorescence excitation spectra at 300 K, 77 K, and 4.2 K for silicate gel matrices colored with meso-tetrapropylporphin by impregnation of the matrix with a solution of the pigment. Comparison of the data obtained with the absorption spectra in acidified solutions and analysis of the low-temperature fine-structure vibronic spectra, and also taking into account data obtained earlier for octaethylporphin in a xerogel showed formation of two cationic forms of meso-tetrapropylporphin in the gel matrix: the short-wavelength form has a dicationic structure, while the long-wavelength form has a monocationic structure. We have traced out the correlations of the vibrational structure in the spectra of the dicationic form with data for the porphin dication, and we have drawn a number of conclusions concerning the normal vibrational modes that are active in the vibronic fluorescence and absorption spectra of the studied cationic forms. Using the AM1 semiempirical quantum chemical method, we optimized the geometry of the mesotetrapropylporphin dication: the most stable of the possible conformers is the dication structure with saddleshaped macrocycle nonplanarity. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 453–461, July–August, 2006.     

溶胶-凝胶VO2薄膜转换特性研究

利用溶胶凝胶法在SiO2Si衬底上沉积高取向的V2O5薄膜,在压强低于2Pa,温度高于400℃的条件下,对V2O5薄膜进行真空烘烤,获得了电阻率变化3个数量级以上、弛豫宽度为62℃的VO2多晶薄膜.以X射线衍射(XRD)、扫描电子显微镜(SEM)图和电阻率转换特性等实验结果为依据,详细分析了溶胶凝胶薄膜在真空烘烤时从V2O5向VO2的转化,它经历了从VnO2n+1(n=2,3,4,6)到VO2的过程.实验证明,根据选择合适的成膜热处理条件和真空烘烤条件是实现溶胶凝胶V2O5结构向VO2结构成功转换的关键 关键词： 溶胶-凝胶法 氧化钒薄膜 VO2膜转换特性     

Rheological and diffusion properties of a dextran-con A polymer in the presence of Insulin and Magnesium

Previous work carried out in our laboratories has focused on the formation and investigation of a dextran and concanavalin A (con A) based gel, which has the ability to alter its conformational structure in the presence and absence of free and terminal glucoses such that a gel–sol phase transition occurs. Here we report the diffusion and rheological investigations in to the effects of the addition of insulin and varyingconcentrations of magnesium chloride hexahydrate (Mg₂Cl₂6H₂O) at 20 and 37 °C. Rheological examination of glucose-sensitive (dextran-con A) gels were conducted using a cone and plate viscometer used in continual rotation and oscillatory modes. The results are interpreted in terms of the structure of the gel network and suggest rheological assessment provides an effective method of assessing the properties of gel systems. The subsequent testing of such formulations in in-vitro diffusion experiments revealed a reduction in the rate of diffusivity in the insulin marker, poly R-478 dye. The performance of this self-regulating drug delivery system has been examined and the addition of insulin and magnesium chloride may alter the way in which the gel operates as a drug delivery device and in the delivery of insulin. This may have implications for other ligands.     

Synthesis of Bioactive and Porous Organic-Inorganic Hybrids for Biomedical Applications

Bioactivity has been exhibited by a limited range of ceramics since the invention of Bioglass®. Recently, some bioactive polymeric organic-inorganic hybrids were introduced, including not only organically modified silicates (Ormosils) synthesized from polydimethylsiloxane (PDMS) and tetraethoxysilane but also those with gelatin and 3-glycidoxypropyl-tremethoxysilane. Preparation of the bulk and porous hybrids and their polymeric structures analyzed by Si NMR spectroscopy were presented. In vitro bioactivity or apatite deposition in a simulated body fluid of the Kokubo recipe were also described for those hybrids. Freeze-drying techniques introduced porosity (up to 90%) and pores extending in a preferred direction.     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.     

Thickness decrease of a grafted polyelectrolyte membrane exposed to shear flow

The effect of the shear flow on the thickness change of a polyelectrolyte membrane grafted onto a glass substrate was directly investigated with a flow cell combined with a confocal laser scanning microscope. The membrane thickness decreased proportionally to an increase in the shear stress of the flow when the shear rate exceeded a critical value of 1 s^?1. The higher the ionic strength was of the fluid, the greater the thinning effect was. The correlation between the critical shear rate and the relaxation of the polymer in the gel membrane was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2808–2815, 2003     

Pattern forming precipitation in gels due to coupling of chemical reactions with diffusion

Precipitate-forming chemical reactions have been studied in chemically cross-linked poly(vinyl alcohol) gel medium. One of the reactive components was incorporated into the gel, the other was allowed to diffuse into it. Depending on the experimental conditions the reaction-diffusion process often results in patterns of different type. Experiments performed in tubes and in thin layers were carried out in order to investigate the effects of various factors (cross-linking density, swelling degree as well as the concentrations of the outer and inner electrolytes) on the morphologies of the precipitate patterns. It was found that precipitation occurs not only in the Liesegang bands, but also between bands. Beside Liesegang-type structures, tree-like patterns have been observed, showing a characteristic periodicity in the density profile obtained by digitalized image analyses.     

Allophane: a natural gel in volcanic soils with interesting environmental properties

Volcanic (allophanic) soils are interesting in terms of the control of the greenhouse effect and the knowledge of the porous features is of importance to understand the mechanism of C and N sequestration. These soils contain a peculiar clay: allophane aggregates quite close to the synthetic mineral gels aggregates. These volcanic materials behave as gels during drying with a large irreversible shrinkage that can modify the soil physical properties. Consequently, as for silica gels, we use the CO₂ supercritical drying procedure (SD) to control the drying step and to preserve the structural and textural properties of the soils. The experimental results show that the N and C content in the soils is clearly dependent on the allophane content. We also show that the textural properties, such as specific surface area, are higher for the supercritically dried samples, compared to the classically dried samples, and SAXS results confirm the preserving effect of the SD. With these data, we propose possible effects of the specific surface area on the C and N content of the allophanic soils.