Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

Formation of sol-gel nanostructured mullite by additions of fluoride ion

Summary The subject of this study was to investigate the effect of fluoride ions addition on the temperature of sol gel mullite formation based on the hypotheses that the presence of fluoride ions can decrease the temperature of mullite formation (in respect to common 980°C, in sol-gel processing). Polymeric sols were prepared by mixing TEOS and aluminum nitrate nanohydrate and by adding fluoride ions (from 2 to 5 mass%). DTA, TG, XRD and SEM were used for characterisation of mullite gel and crystalline mullite. The experimental results confirmed that the addition of fluoride ions decrease the temperature of mullite formation up to 890°C for the fluorine concentration of 3.5 mass%. Experimental results showed that the temperature of mullite formation is not a simple function of the fluoride ion content. The mechanism of fluorine effect was discussed in terms of the gelling process, gel structure and the phase separation before the mullite formation.     

凝胶体系中羧酸对草酸钙结晶的影响

羧酸是泌尿系结石形成的抑制剂。本文采用双扩散法考察凝胶体系中一元羧酸HAc、二元羧酸酒石酸、三元羧酸柠檬酸和四元羧酸EDTA对草酸钙(CaOx)结晶的影响。HAc没有抑制作用。酒石酸和柠檬酸能够改变一水草酸钙(COM)晶体的形貌，并抑制草酸钙晶体二维生长，这种抑制作用随时间的增加而增强。EDTA使COM晶体在长度方向生长更快，而在宽度和厚度上生长更慢。随着结晶温度的降低，形成草酸钙晶体的时间增加，且二水草酸钙(COD)的比例增加。在5℃的低温条件下，添加有二元、三元和四元羧酸的CaOx结晶中，COD成为主要的物相。     

New data on the thermal analysis of diphasic mullite gel

A diphasic mullite gel has been synthesized by using Ludox and Al(NO₃)₃-9H₂O in ammoniacal solution. Both DTA and DDTA studies have been performed with a sensitive differential thermal analyzer system. Besides usual exotherm due to mullite formation, a pronounced exotherm between 800–1300°C has been noted. Considering previous XRD data, it is explained as due to formation of Si-Al spinel phase, which is subsequently transformed exothermally at 1320°C to mullite.     

One-Step Synthesis of Monolithic Silica Nanocomposites in Fused Silica Capillaries

The ideal way to prepare efficient, yet robust stationary phases for microanalytical high-resolution methods such as capillary chromatography and electrochromatography remains to be defined. In this contribution a one step sol-gel process is proposed for the production of monolithic, macroporous nanocomposite phases in fused silica capillaries, which require no additional derivatization, since they already bear the interactive (C8) moieties. The effect of the catalyst, the water content, the pH, as well as that of certain additives on monolith formation and porosity is investigated. Volume shrinkage and a tendency to crack were the major obstacles to overcome. Homogeneous stationary phases could be produced by applying a pH gradient during sol formation, thereby changing the catalytic principle from acidic (0.1 M HCl) to basic (gradual formation of OH^– as a consequence of the hydrolysis of N-methylformamide). Gelation/coacervation of suchgels could be induced by the addition of N,N-diethylamine. The water content during sol formation was determined as decisive for pore formation, with 250% of the amount theoretically needed for complete hydrolysis of all precursors giving optimal results. The volume shrinkage problem during xerogel formation was resolved by integrating dialkyldialkoxysilane units (dimethyldiethoxysilane 35 mol%) into the silica network.     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

巯基葡聚糖凝胶分离富集光度法测定镉的研究

研究了在ＴｒｉｔｏｎＸ－１００存在下，新显色剂邻羧基苯基重氮氨基偶氮苯（ＣＤＡＡ）与镉的显色体系，在ｐＨ１０．６的Ｎａ２Ｂ４Ｏ７－ＮａＯＨ体系中，显色反应灵敏度很高。络合物的最大吸收位于５４５ｎｍ处，其摩尔吸光系数为２．２２×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１。镉含量在０￣１２μｇ／２５ｍＬ符合比耳定律。将该体系用于巯基葡聚糖凝胶分离富集－光度法测水样中微量镉，结果令人满意。     

Preparation of a sulfonated fused-silica capillary and its application in capillary electrophoresis and electrochromatography

In the present paper, two new methods, sol-gel and chemical bonding methods, were proposed for preparation of sulfonated fused-silica capillaries. In the sol-gel method, a fused-silica capillary was coated with the sol solution obtained by hydrolysis of 3-mercaptopropyltrimethoxysilane (MPTS) and tetramethoxysilane, and followed by age; while in the chemical bonding method, a capillary was chemically bonded directly with MPTS. Then, both the resulting capillaries were oxidized with an aqueous solution of hydrogen peroxide solution (H2O2) (30%, m/m) to obtain the sulfonated capillaries. The electroosmotic flow (EOF) for the sulfonated capillaries was found to remain almost constant within the studied pH range, and greater than that of the uncoated capillary. However, the coating efficiency of the capillary prepared by chemical bonding method was higher than that by sol-gel method, by comparing their magnitude of the EOF, the degree of disguise of the silanol and reproducibility of preparation procedure. The effects of the electrolyte's concentration and the content of methanol (MeOH) on the EOF were also studied. Especially, the study of the apparent pH (pH*) on the EOF in a water-MeOH system was reported. Finally, capillary electrophoretic separation of seven organic acids was achieved within 6.5 min under optimal condition using the chemically bonded sulfonated capillary. Moreover, separation of four alkaloids on the sulfonated capillary was compared with that on uncoated capillary in different conditions. Ion-exchange mechanism was found to play a key role for separation of these four basic analytes on the sulfonated capillary.     

Adsorption from Ternary Liquid Mixtures on Partially Dehydroxylated Silica Gel

The formation of mixed adsorbed layers has been tested for ternary mixtures containing a specifically adsorbed component—acetone and binary solvent benzene +n-hepane. The specific excess adsorption isotherms from the liquid phase were measured on silica gel samples partially dehydroxylated. The competition of liquid components for silica surface is discussed on the basis of changes in the mixed solvent composition.