Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

过硼酸钠对于有机物的氧化作用的研究 II: 氧化偶氮硝基苯类的合成

作者曾报道过硼酸钠在醋酸溶液中可使芳氨基氧化成硝基;McKillop等曾报道将过硼酸钠用于官能团的氧化;Huestis曾报道在冰醋酸溶液中用过硼酸钠将芳胺氧化成偶氮苯。这些都表明过硼酸钠是一种优良的氧化剂,反应条件温和、选择性强、氧化剂本身。价廉且其还原后所生成的硼酸钠易于处理和排放。因此,值得深入研究其应用范围。我们在此则报道一组以过硼酸钠为氧化剂,使芳胺氧化成氧化偶氮苯的条件。最近我们发现,在乙醇-磷酸体系中,过硼酸钠能顺     

Spreading of dipalmitoyl phosphatidylcholine on the surface of sodium deoxycholate aqueous solution

The surface pressure vs. mokcular surface area relations for dipalmitoyl phosphatidylcholine (DPPC) insoluble monolayer and sodium deoxycholate (SDC) adsorbed monolayer,L and D1, respectively, were obtained from the analyses of surface tensions measured by the Wilhelmy glass plate. Also, D1 was obtained by a drop-weight method. Next, the surface pressure time course,(t), of the SDC aq. was measured by the Wilhelmy plate before and after DPPC was spread on the liquid surface. At DPPC spreading,(t) jumped to a maximum,, and decreased along an exponential curve. The values of with various surface amounts of DPPC and bulk concentrations of SDC were analyzed using a dual surface-region model. The model enabled the estimation of. For better fitting, modified relations were constructed in place of D1. The exponential decrease of(t) was also observed on the SDC adsorbed monolayer which was rapidly compressed by a moving barrier. The(t) relaxation rate constants of the SDC monolayers which were compressed by DPPC spreading and the moving barrier agreed with each other, suggesting a desorption of SDC from the surface.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Phenol methylation over CrPO4 and CrPO4?AlPO4 catalysts

The vapor-phase catalytic alkylation of phenol with methanol and dimethyl carbonate on a series of differently prepared CrPO₄ (Cr/P=1) and CrPO₄-AlPO₄ (CrAIP) catalysts, has been studied at different temperatures (473–673 K). The reaction is first order in phenol, giving a mixture of O- and C-alkylated products (C-alkylation taking place preferentially at theortho-position). Moreover, dimethyl carbonate is a better methylating agent than methanol.     

Thermal transformations in systems based on zeolites Y,X, and A containing zinc and sodium nitrates

Thermal transformations in systems formed by interaction of Zn and Na nitrates with Y, X, and A zeolites were studied by TG—DTA technique. Temperature regions of existence of adsorbed water, water of crystallization, and decomposition of NO₃ ^– anion were determined. These intervals depend on the composition, structure, method of preparation, and pre-treatment conditions of zeolite systems. The extent of NO₃ ^– decomposition depends not only on the zinc and sodium content but also on the presence of ammonia involved in NO₃ ^– reduction. The zeolite matrix strongly stabilizes the occluded NO₃ ^– anions. A portion of zinc oxide formed by zinc nitrate decomposition is probably localized inside the zeolite cavities as the [Zn—O—(ZnO) _n —Zn]²⁺ particles. The latter compensate charges of the isolated [AlO₄]^– tetrahedra.     

Enzymatic Synthesis and Polymerization of Cyclic Trimethylene Carbonate Monomer with/without Methyl Substituent

The direct enzymatic synthesis of a cyclic trimethylene carbonate (1,3‐dioxane‐2‐one) monomer with/without a methyl substituent was carried out using dimethyl or diethyl carbonate and 1,3‐diol with the objective of producing aliphatic poly(trimethylene carbonate), a typical biodegradable synthetic plastic. The lipase‐catalyzed condensation of dimethyl or diethyl carbonate with aliphatic 1,3‐diols using immobilized Candida antarctica lipase (lipase CA) in an organic solvent at 70 °C afforded the corresponding methyl‐substituted and unsubstituted cyclic trimethylene carbonates. The cyclic trimethylene carbonates obtained by the reaction of dimethyl or diethyl carbonates with 1,3‐propanediol and 2‐methyl‐1,3‐propanediol were polymerized by lipase to produce the corresponding polycarbonates.

Total TMC yield as a function of the reaction time.     

Enthalpies of dilution of electrolyte solutions by flow microcalorimetry

The enthalpies of dilution of NaCl, Me₄NBr, andn-Bu₄NBr were measured in water at 25°C with a new flow microcalorimeter. The data were analyzed with a polynomial equation, and the derived relative apparent molal enthalpies _L are in good agreement with literature values. Provided care is taken that mixing is complete, flow calorimeters are as reliable and much less time-consuming than cell-type instruments for enthalpies of dilution measurements.     

碳酸氢铵制纯碱的研究

本文对“中间盐”复分解制碱法进行了研究。“中间盐”的加入不能使两个三盐共饱和点在干盐图上发生明显的移动,但能使三盐介稳平衡点的介稳期延长,从而使得用碳酸氢铵和食盐通过复分解制碱成为可能。