中国邮路问题的0-1规划解法

在用“奇偶点图上作业法”求解“中国邮路问题”时,需检查图中的每一个回路.当图中回路较多时,检查不便且易出错.针对此,本文建立了求解“中国邮路问题”的0-1规划模型,并给出了算例。     

新的基团法估算沸点下蒸发焓

提出了估算沸点下蒸发焓的含基团重量分率的基团法和估算式，拟合团贡献值，对３８５种有机物的计算平均偏差约为１．５％。所提出的新方法明显优于３种对应状态和用蒸发熵的基团法。     

矿区铁路专用线下综采放顶煤开采的试验研究

介绍了国内第一个综采放顶煤开采矿区铁路线下压煤试验面的成功经验，总结了试采中对铁路所采取的各种分析和维护措施，分析了该采煤方法下的地在移动和变形特点，为我国“三下”采煤领域提供了具有特色的成功实例。     

高阶半线性抛物型方程组的生命跨度

其中m,P,q>1．利用试验函数方法,首先推导一些积分不等式,然后对方程组爆破解的生命跨度 [0,T)给出估计．     

On parabolic equations with a small parameter

A singularly perturbed parabolic equation with a nonlinear right-hand side of a special form is examined. A numerical analytical study of such equations is performed.     

一种改进的计算探测器校正因子的相关抽样方法

对于小尺寸探测器处于大块介质的情形, 在探测器的校正因子的Monte Carlo模拟中, 存在两个难题: 一是由于探测器尺寸很小粒子难以到达探测器并发生碰撞; 二是两个随机变量比值难以达到要求精度. 本文使用经过改进的粒子碰撞自动重要抽样方法, 再结合相关抽样方法, 解决了这两个难题, 并在MCNP-4C程序平台上加以实现. 除了粒子碰撞自动重要抽样以外, 还选用了其他3种方法: 直接模拟、区域分裂、强迫碰撞+Dxtran球分别与相关抽样方法结合, 对一个简化的探测器校正因子计算模型进行了计算. 实际计算结果表明, 相关抽样方法无论与哪种方法结合, 都起到了提高相关量计算效率的作用; 而它与粒子碰撞自动重要抽样结合, 比其他方法具有明显的优越性.     

Mathematical modelling and analytical solution for workpiece temperature in grinding

This paper deals with modelling the workpiece temperature field produced during the grinding process. The proposed model is given in terms of a two-dimensional boundary-value problem where the interdependence among the grinding wheel, the workpiece and the coolant is described by two variable functions in the boundary condition. An explicit integral form solution is constructed using the Laplace and Fourier transforms and the Green’s function method.     

浅水中污染物扩散的自适应有限元分析法

介绍浅水中污染物扩散分析中的有限元法.分析包括两个部分:1)流场速度、水面高度的计算;2)根据扩散模型计算污染物浓度场.联合使用了自适应网格技术以期提高解的精度,同时减少计算时间和计算机内存的消耗.通过几个有已知解的实例验证了有限元公式和计算机程序.最后,使用这种联合方法分析泰国Chao Phraya河附近海湾中的污染物扩散.     

A numerical experimental study of inverse preconditioning for the parallel iterative solution to 3D finite element flow equations

Integration of the subsurface flow equation by finite elements (FE) in space and finite differences (FD) in time requires the repeated solution to sparse symmetric positive definite systems of linear equations. Iterative techniques based on preconditioned conjugate gradients (PCG) are one of the most attractive tool to solve the problem on sequential computers. A present challenge is to make PCG attractive in a parallel computing environment as well. To this aim a key factor is the development of an efficient parallel preconditioner. FSAI (factorized sparse approximate inverse) and enlarged FSAI relying on the approximate inverse of the coefficient matrix appears to be a most promising parallel preconditioner. In the present paper PCG using FSAI, diagonal and pARMS (parallel algebraic recursive multilevel solvers) preconditioners is implemented on the IBM SP4/512 and CLX/768 supercomputers with up to 32 processors to solve underground flow problems of a large size. The results show that FSAI may allow for a parallel relative efficiency larger than 50% on the largest problems with p=32 processors. Moreover, FSAI turns out to be significantly less expensive and more robust than pARMS. Finally, it is shown that for p in the upper range may be much improved if PCG–FSAI is implemented on CLX.     

等腰三角形Mindlin板的自由振动分析

提出了一种新方法来对基于 Mindlin剪切变形理论的等腰三角形板进行自由振动分析 .此方法采用了一种新的基函数并利用 pb-2 Rayleigh-Ritz边界函数得到了一种新型的 Ritz方法 .这种方法的有效性通过收敛性和对比性分析得到了证实 .数值结果表明此方法相当精确有效 .