Dehydrogenation of methanol on low Cu and Re—Cu catalysts supported on sibunite

The activity and selectivity of mono- and bimetallic catalysts containing copper and rhenium on sibunite were studied in the decomposition of methanol to methyl formate (MF), water, H₂, CO, and CO₂at 200—400 °C. Methane is also formed on rhenium-containing catalysts at 300—400 °C. The dehydrogenating activity and selectivity to form MF are higher on the copper-sibunite catalysts than on the rhenium-sibunite samples. The introduction of 0.25% Re into the 4% copper-containing catalyst enhances its total activity and stability.     

硅胶担载四核羰基钴催化剂的EXAFS和IR研究

本文以透射法EXAFS和IR等手段研究了四核羰基钴金属簇Co_4(CO)_(10)(PPh)_2担载在SiO_2上以后及用于烯烃醛化反应前后的变化,确定了相应的结构参数并探讨了催化活性与结构的关系。     

POLYMER-SUPPORTED LEWIS ACID CATALYSTS. Ⅵ. POLYSTYRENE-BONDED STANNIC CHLORIDE CATALYST

A polystyrene-bonded stannic chloride catalyst was synthesized by the method of lithium polystyryl combined with stannic chloride. This catalyst is a polymeric organometallic compound containing 0.25 mmol Sn (Ⅳ)/g catalyst. The catalyst showed sufficient stability and catalytic activity in organic reaction such as esterification, acetalation and ketal formation, and it could be reused many times without losing its catalytic activity.     

溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

有机/无机杂化材料担载季铵盐催化剂的制备及其在相转移催化反应中的应用

利用溶胶-凝胶(S0l-gel)技术制备了新型的有机／无机杂化材料担载的季铵盐催化剂。优化了制备方法、反应条件等多种因素；考察了其作为相转移催化剂在1-溴代正庚烷与碘化钾的亲核取代反应中的应用，转化率最高可达到95％。     

The Incorporation of Titania into Modified Silicates for Solar Photodegradation of Aqueous Species

A new class of sol-gel-derived photocatalytic materials has been synthesized and used in solar-assisted photodegradation studies. The materials are comprised of a homogeneous dispersion of commercial TiO₂ powder into silica and organically modified silicate (Ormosil) hosts. The efficiency of the photocatalytic properties of these TiO₂-containing materials was determined by their relative performance in the solar photodecomposition of aqueous rhodamine B. The improved adsorption properties of the modified materials compared to commercial TiO₂ increase the photodecomposition rate and the buoyancy properties, although excess hydrophobicity decreases the wetted section of the catalyst and its photocatalytic performance. These materials can be used as floatable catalysts for solar-assisted water purification.     

Low-temperature hydrodechlorination of 2,3-dichlorodibenzo-p-dioxin and chlorobenzene with hydrides catalyzed by transition metal compounds

Hydrodechlorination of chlorobcnzene by chemically bound hydrogen in the presence of transition metal compounds was studied. Alkali and alkaline earth metal hydrides (NaH, MgH₂, LiAlH₄, NaH(LiAlH₄)/12) were used as the sources of the chemically bound hydrogen. The effect of the natures of the hydride and of the transition metal on the activity was studied under comparable conditions. The Pd/C-NaH(LiAlH₄1/2 catalytic system was found to be the most active. This system made it possible to perform the quantitative dechlorination of 2,3-dichlorodibenzo-p-dioxin at 70 °C.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1391–1394, June, 1996.     

茂锆载体催化剂下的乙烯／辛烯共聚及聚合物的^13C NMR研究

茂锆载体催化剂下的乙烯／辛烯共聚及聚合物的~（１３）ＣＮＭＲ研究刘胜生，于广谦，黄葆同（中国科学院长春应用化学研究所长春１３００２２）关键词茂锆载体催化剂，共聚，序列分布，~（１３）ＣＮＭＲ由于茂锆催化剂具有高活性，单一活性中心等特点［１，２］，并且能...     

Ni2（OEt）2／SiO2催化二氧化碳与丙烯直接合成甲基丙烯酸的研究

 采用表面改性法制备了负载型Ni2（OEt）2／SiO2双核金属乙氧基配合物催化剂，利用示差量热、红外光谱和微反技术对催化剂的表面结构、热稳定性、化学吸附性质和催化活性进行了研究．结果表明，负载型双核金属乙氧基配合物Ni2（OEt）2／SiO2中的Ni2＋与载体SiO2表面的O2－以双齿配位形式键合；二氧化碳在催化剂表面存在桥式吸附态和碳酸单乙酯基物种两种吸附态，丙烯则只有一种分子吸附态；在适宜的反应条件下，二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂上的反应产物主要是甲基丙烯酸．根据实验结果，提出了二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂表面的反应机理，反应物分子共吸附于催化剂表面同一活性单元上，羧酸根和丙烯解离吸附态的形成是反应顺利进行的关键步骤．     

Counterpoise-corrected potential energy surfaces of simple H-bonded systems

Geometries and stabilization energies of various simple H-bonded complexes (water dimer, hydrogen fluoride dimer, formamide dimer, formic acid dimer) have been determined by a gradient optimization that eliminates the basis set superposition error (BSSE) by the counterpoise (CP) method in each gradient cycle as well as by the standard gradient optimization. Both optimization methods lead to different potential energy surfaces (PES). The difference depends on the theoretical level used and is larger if correlation energy is considered. Intermolecular distances from the CP-corrected PES are consistently longer, and this difference might be significant (∼0.1 ?); also angular characteristics determined from both surfaces differ significantly. Different geometries were obtained even when passing to larger basis sets (aug-cc-pVDZ). The standard optimization procedure can result in a completely wrong structure. For example, the “quasi-linear” structure of the (HF)₂ (global minimum) does not exist at the standard MP2/ 6-31G** PES (where only cyclic structure was detected) and is found only at the CP-corrected PES. Stabilization energies obtained from the CP-corrected PES are always larger than these from the standard PES where the BSSE is added only a posteriori for the final optimized structure; both energies converge only when passing to a larger basis set (aug-cc-pVDZ). Received: 11 March 1998 / Accepted: 19 June 1998 / Published online: 4 September 1998 RID=" ID=" <E6>Acknowledgements.</E6> The project was supported by the Grant Agency of the Czech Republic (Grant No. 203/98/1166). RID=" ID=" <E5>Correspondence to</E5>: P. Hobza