Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Derivation of the transport equation for electrons moving through random impurities

A single (nonrelativistic, spinless) electron subject to a constant external electric field interacts with impurities located on an infinitely extended lattice by a potential of random strength. The random strength is given by a field of Gaussian random variables. We show the existence of the averaged dynamics and prove that in the weak coupling limit, 0, ₂ t= fixed, one obtains the usual transport equation for the velocity distribution.Work supported by a Max Kade Foundation fellowship.On leave of absence of the Fachbereich Physik der Universität München.     

纳米Y2O3/钴基合金激光熔覆层的组织

利用5 kW CO2激光器,在Ni基高温合金表面,熔覆纳米稀土氧化物(Y2O3)/钴基合金复合材料,制备了涂层.利用光学显微镜、扫描电镜及透射电镜分析了熔覆层的组织结构.结果表明: 熔覆层的主要相组成为γ-Co,ε-Co,Cr23C6和Y2O3;加入纳米Y2O3,凝固组织由细长的柱状树枝晶转变为较短的树枝晶;纳米Y2O3含量增大至1%时整个断面获得等轴晶组织;纳米Y2O3作为异质形核的核心,细化了组织;纳米Y2O3在熔覆层中分布不均匀,促进了γ-Co向ε-Co的转变;熔覆层的亚结构为堆跺层错.对熔覆层等轴组织形成机制进行了分析.     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

Structural and Transport Properties of Mg1−xMnxMn2O4±δ Spinels

The synthesis and structural properties of Mg_1−xMn_2+xO₄, for 0≤x≤1 are described. Complete miscibility in the solid state exists for this system. For the material with the correct stoichiometry, i.e. MgMn₂O₄, the effect of temperature on the cation distribution was investigated= above 600°C the inversion degree (m) starts increasing. The electrical conductivity shows a small dependence on P(O₂) which is consistent with the small oxygen non-stoichiometry determined by means of thermogravimetry. The main contribution to the transport properties arises from the inversion equilibrium. Two distinct conductivity regimes, below and above the inversion threshold, can be assumed to explain the electrical conductivity and thermoelectric power results.     

Contributions on the Properties of Titanates with Ilmenite Structure. IV. The effect of an order-disorder transition on the high temperature electrical conductivity of NiTiO3

NiTiO₃ shows an order-disorder transition from an ordered ilmenite structure to a corundum structure at high temperatures. The transition is followed by a strong increase of the specific electrical conductivity. The conductivity was investigated as a function of temperature and oxygen activity. An order parameter according to common phase transition theories can be used to describe the behaviour of the conductivity in the transition region and vice versa. A model for the defect structure of NiTiO₃ is presented.     

Measuring Contact Angles at Copper Electrodes

Potential dependences of the angle of contact between perfluorodecaline C₁₀F₁₈ and copper, copper(I) sulfide, and copper telluride Cu₄Te₃ in 0.1 M CH₃COONa are measured. The data are in good agreement with the metal hardness measured in 1 M KOH. The uncharged-surface potentials (USP) for copper, copper(I) sulfide, and copper telluride equal 0.05–0.07, –0.02 to –0.04, and 0.05–0.07 V (NHE) in 0.1 M CH₃COONa. Studying the effect of Br^– ions shows that USP for copper and Cu₂S shift in, respectively, the negative and positive directions with an increase in [Br^–]. For copper telluride, USP shifts in the positive direction at low Br^– concentrations, and at NaBr concentrations in excess of 0.04 M, in the negative direction.     

Natural zeolitic material of the clinoptilolite type doped with iodine and its ions

The aim of this study was the preparation of natural zeolitic materials doped with iodine and its ions. Natural zeolite from an East Slovakian deposit was used. The content of iodine in the zeolitic products depended on the experimental conditions used for the preparation. The products and their intermediates obtained at 100, 200, 400 and 900°C were identified.     

Effect of surface treatment on the Hamaker constant of intermediate modulus carbon fibers

The Hamaker constant of unsized intermediate modulus carbon fibers was evaluated by contact angle measurement following the Fowkes theory of interfacial energetics. The effects of a surface treatment (performed by the manufacturer) and an oxygen plasma treatment (performed by us), both of oxidizing nature, proved to slightly increase the value of the Hamaker constant to a level that enhanced by about 9% the Lifshitz-van der Waals contribution to the theoretical adhesion force between the fiber and an epoxy matrix. A possible explanation of the observed increase of the Hamaker constant is the higher contribution to the overall Lifshitz-van der Waals interaction of Keesom (orientation) and Debye (induction) forces.     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.