Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

电工实验测量误差的分析

分析在电工实验测量时产生测量误差的原因及减小测量误差的方法，正确估计测量误差和有效数字的正确表示。     

刚体转动惯量实验仪实验的误差分析

分析了刚体转动惯量实验仪实验中的误差来源,指出时间测量不准确与阻力矩是产生误差的主要因素,测量了阻力矩的大小,定量分析了阻力矩的影响,当砝码质量为20g时,阻力矩与砝码的拉力矩之比可达19%。     

Comparison between a white-light interferometer and a tactile formtester for the measurement of long inner cylindrical surfaces

Shape measurements of engineering surfaces are an interesting and important application for white-light interferometry (WLI). Due to some factors such as: (a) the high-processing speed, (b) the ability to measure a huge quantity of points of the evaluated surface, and (c) the non-contacting nature; WLI has become a valuable tool for practical applications. This paper shows the achieved comparison between a modified white-light interferometer and an established measurement system, namely a formtester with a tactile spherical stylus sensor, which is the most commonly used instrument in the industry. Furthermore, this paper shows that the combination between the modified white-light interferometer and an adequate measurement and processing strategy has enabled to obtain a good agreement between optical and tactile measurements of long inner cylindrical surfaces. A cloud of points (COP) measured with the modified white-light interferometer has presented a standard deviation of about 0.3 μm when it was compared with formtester measurement of the same parts.     

Study on response of CR-39 detector to light ions

The response of CR-39 detector has been obtained precisely for protons, deuterons, tritons, alpha-particles and lithiumions with energies of a few MeV/nucleon. The track etch rates were determined from the growth curves of pit radius and summarized as the response functions. The accuracy of this method is high enough to discriminate among hydrogen isotopes under a certain condition. The correlation between the response and LET with various cut-off energies has also been examined. It was found that LET is not an unique parameter describing the response function adequately for different ions by the same expression.     

双色反射技术在温度测量上的应用

本文以铁镍合金为例,介绍了一种测量金属表面温度的光学测量方法。试验以黑体为反射辐射源,采用FTIR光谱辐射计测量了试样在中温状态的发射辐射以及包含了黑体反射能量的有效辐射。通过建立包含反射辐射的方程组,并运用MATLAB内建的求根模型求解得到了试样表面温度。     

数字稳定单元通用测试系统研制

本文从数字稳定单元的工作原理出发，研制了一套ＤＳＵ的通用测试系统，对雷达测试具有重要意义。     

Product measurements and fully symmetric measurements in qubit-pair tomography: A numerical study

State tomography on qubit pairs is routinely carried out by measuring the two qubits separately, while one expects a higher efficiency from tomography with highly symmetric joint measurements of both qubits. Our numerical study of simulated experiments does not support such expectations.     

基于无衍射光及虚拟探测器的三角测量系统

提出一种新型激光三角测量系统。该系统用无衍射光作测量光束，用虚拟探测器扩展探测器尺寸。与传统激光三角测量相比，该系统在保持高测量精度及高分辨率的同时，扩展了测量范围。且系统机构简单，测量速度快。